Please don't disturb the doorbell when the hotel plugs in the card to get electricity contact. Please give some advice, such as the total leakage control gate of electric phase.

Are you an engineer? It's better for someone to take you for a while first, otherwise it's easy to go wrong. Now I will simply answer your question:

1, the card is actually a light switch, which controls the contactor. The single-stage switch under the contactor is the safety switch of each circuit. When the contactor is closed, every circuit will have electricity.

2. Do not disturb. The wiring of the doorbell is from top to bottom, and the box for plugging in the card to get electricity actually only plays the role of a wire box. They are all connected from the distribution box to the outside and the console.

3. The switch under Do Not Disturb is a 2x2 switch. Press the "Do Not Disturb" light to close the doorbell. Press it again, open the doorbell and turn off the light.

4. When you say A 1, A2 should be connected to the photocell powered by the card, and A 1.2.3.4 should be connected to each single-stage switch.

The wiring diagram you need is the wiring diagram of secondary decoration. You can refer to other drawings, but you can't draw here.

To tell the truth, your basic knowledge of electricity is too poor. You'd better study systematically or find someone to help you, otherwise problems will easily occur.