What design skills should be paid attention to in tile floor mosaic?

At present, in order to achieve better decoration effect, designers will beautify the space through mosaic design of tile floor. Then Bian Xiao introduced the matters needing attention about tile floor mosaic and the concrete design method of tile floor mosaic. Interested friends will follow us to look down.

1. Precautions for mosaic of ceramic tile floor

1. Grasp the flatness of the ground.

Before laying floor tiles, be sure to control the flatness of the ground. If the ground is uneven, please stop laying immediately. Of course, the most important thing in paving tiles is to find the standard points, and the joints must be uniform and not misplaced. Generally speaking, the bottom plate can be found after fixing.

2. Do waterproof treatment in advance.

Because replacing the porcelain plate will generally destroy the original waterproof layer of cement mortar, it is necessary to waterproof it in advance. For example, a layer of asphalt waterproof layer can be coated before paving, and the joint glue between bricks should also be mended.

Investigate the actual situation

Soak the floor tiles for about half a day, and check whether the bathroom floor has a suitable slope and is dry. Floor tile construction can only be carried out after confirmation. When the step of laying tiles is completed, use cardboard as a cover and walk on the tiles for at least one day.

2. Design skills of tile floor mosaic

1. The most basic point of tile floor mosaic is to arrange it according to the pre-designed scheme to achieve the preset effect.

2. Before laying the parquet floor, the surface of the parquet floor should be attached to the wall vertically, and the corners of each floor tile should be padded with foam to prevent the sharp corners of the tiles from being damaged. It is forbidden to press the floor tiles with heavy objects.

3. Use high-viscosity cement or tile adhesive when paving. This can be more convenient for the bonding between floor tiles.

4. When laying, ensure that the bottom surface of each floor tile is free of loose materials and oil stains. The surface of the floor tile is solid and clean, so as to better complete the splicing of the floor tile.

5. Keep the base level flat, and then keep the thickness of the whole mosaic;

6. Wet paste when laying solid wood composite floor. If the bricks around the solid wood composite floor are dry, pay attention to adjust the parquet height first.

7. Mosaic can be laid at the same time as the surrounding bricks, so that the flowers and the whole brick are flat.

8. After the parquet floor is laid, it is usually necessary to fine-tune the flatness. At this time, tap the middle of the floor tile with a rubber hammer first, and then adjust the edge of the brick.

3. Characteristics of water jet solid wood composite floor

1. Water jet cutting can be used for any curve of any one-time cutting process curve. In addition to water cutting, other cutting methods will be limited by the type of material.

2. Cutting does not produce heat and harmful substances, and the material has no thermal effect, so it is cold cutting.

3. No need or easy reprocessing after cutting, safety, environmental protection, low cost, high efficiency, convenience and flexibility, which can realize arbitrary curve cutting.

4. Water cutting is the most suitable cutting technology for tile floor at present.

I believe everyone has understood the above suggestions. For the choice of decoration, everyone should combine their own actual situation and their own preferences. I hope Bian Xiao's suggestion on tile floor mosaic is helpful for everyone to buy.