How does the hotel handle the bright shower head in the bathroom?

Soak in vinegar

If your shower head is blocked for a long time, and a large number of small holes are blocked. Then stab one by one with a needle, which is obviously not obvious. In this case, it is suggested that you use acidification dust removal to solve the problem of shower nozzle blockage. You need to prepare some white vinegar and pour it into the basin so that the shower head can be submerged. Soak in vinegar for about ten minutes, and the scale in the shower head can be removed.

Use acupuncture

If some holes in your shower are blocked, drain the water first and see which holes are blocked. Then you have to open the shower head of the shower head and see that there are many small holes like the shower head. This is where the water comes out. Then let's prepare a needle first, and then use the needle to pierce the impurities in the hole without water until there are no impurities in the hole. This method is the most direct, but be careful to stab the shower hole.

Use lubricant

If the metal rust of the shower nozzle causes serious blockage, then WD-40 is used to remove the rust in the antirust oil. This rust-removing lubricant has good affinity and permeability to metals. The rust layer can be separated from the metal layer. Let the rusty part contact with the metal, leaving a protective film. Let the shower never rust. If your shower head is not stainless steel, you can use this method.