One-page design tutorial -coreldraw steps to make a single page

How to make flyers with ps The method of making flyers with photoshop is:

1. First, create a white background file with the required size (take A4 size as an example), the color mode is CMYK mode, and the resolution is 150 to 300dpi.

2. Then open the publicity picture, drag it into the background file, and ctrl+t adjusts the size and position.

3. Then, choose different fonts and colors, paste explanatory words such as propaganda slogans, adjust the size and position, and rasterize the words.

4. Secondly, double-click the text layer to bring up the "Layer Style" and set the required text effects, such as "Bevel and Relief" and "Projection".

5. Then click File, select the picture stored in JPG format, and finally click Finish Printing.

For more information about how to use ps to make flyer pages, please visit:

See more content

Coreldraw does single-page operation steps coreldraw does single-page operation steps.

First set the size of the required file, which is generally survival size +3mm bleeding. For example, the common size of 16 is 2 10*285, so set the size to 2 16*29 1mm and press enter.

Then start making, in fact, you should design first and then make, and don't think about what to do when making. According to the design requirements, start to do the background. The background can be imported by ps or made by cdr now. Do a good job of background and pattern. Start writing articles. If there are pictures, you can import them first, and then use paragraph text as the text body, or you can use text wrapping settings. If there is no paragraph text, just a few words, using art text, typesetting and then adjusting. Finally, do a good job of tangent, storage and plotting.

Simple operation steps of cad

1 buy basic CAD operations, the more detailed the better, and follow the practice step by step.

2 memory CAD shortcut commands

3 practice more.

Look at my usual shortcut commands.

REC rectangular command I inserts fast CTRL+S storage.

An arc command CHA chamfer CTRL+P print

B quickly create f fillet CTRL+TAB to change the map.

Fill and gradient rotate CTRL+A select all.

TR cut command DAL alignment label CTRL+C copy

EX extension command DCO continuous label CTRL+V paste.

L straight line command DIV constant division CTRL+O to open the file.

P translation command DRA radius dimension CTRL+X cutting

CO, CP copy command OS object capture CTRL+Q close.

MA override command sets CTRL+Z to return.

E delete command x decompose command

O the offset command Esc cancels the operation.

The SC zoom command cancels all editing operations.

■ Stretch command ST text word

Z Real-time Zoom Save Time Setting Auto Save Command

R circle command PL is used to calculate the area of irregular graphics.

The M move command purge is used to clear redundant content.

AR array command

MI mapping command

T word command

MT multi-line text command DT single-line text command

EL ellipse command

PL polyline

J merge command

BR interrupt command is a common CAD command!

CHA chamfering application! When giving the command, press D to select the chamfer distance, and the same principle applies to fillet, but press R to select the radius.

Operating steps of gravure printing machine or sheet-fed gravure printing machine

Process flow of unit gravure printing equipment

Unwinding-feeding traction-printing group-discharging traction-winding

Different manufacturers have subtle differences in operation, and they also have different operation methods according to the structure.

Therefore, the specific situation should be operated according to the equipment.

Questions that are too general are not easy to answer.

I don't know much about the operation of sheet-fed gravure press.

Ansys operating steps 2013122016.00

Selecting element types and material properties, establishing models, generating meshes, imposing boundary conditions and force conditions, solving, post-processing and checking results; Summary, pretreatment, solution and post-processing. I hope the exam goes well. I don't know what to test. Let's go . .

The logical operation steps of barber shop

Shampoo-softening-shampooing-straightening and shaping-shampooing.

Prepare tools

1, agent

Softener, hair straightener, shampoo, conditioner.

2. Auxiliary tools

Container, comb, earmuffs, disposable towels, large clips (used to clip hair in different grooves), electric hair straightener, and hair dryer.

operation sequence/order

1, rinse your hair with warm water first, and then rinse it with conditioner after shampooing.

2. Absorb water with a towel until it doesn't drip, and then soften the hair with the softener that has been stirred before 15-20 minutes (the softening time is determined by the quality of the hair, and it is checked every five minutes. Try pulling one or two hairs, which can lengthen the length of the original hair by 2-3 times without rebounding, then rinse with water and care with conditioner. Pay attention to keep your hair straight when washing your hair.

3. Then, comb the hair straightener with a dense tooth comb, leaving no dead ends. Try to keep your hair straight, otherwise it will be difficult to set it.

Rinse with warm water after half an hour, and the conditioner can protect the hair.

Solidworks version 20 12 does the steps of * * *

I suggest reading the tutorial.

Including Solidworks20 12 software detailed operation basic course, sheet metal and weldment course, mechanical design course, surface design example proficiency course and complete example course.

Solidworks20 12 video tutorial:: 3322. /soft/ 1 197 1。

The operation step of NH3 reacting with HCl is the operation step! Not a reaction step! Urgent!

Dip two glass rods into concentrated hydrochloric acid and ammonia water respectively, and then get close to the glass rods.

Reaction phenomenon: white smoke

Equation NH3+HCl=NH4Cl

Operation steps of scraping

1, exposing the scraped part;

2. Ensure that the scraped parts are clean;

3. Apply scraping oil evenly;

4, scraping;

5. Wipe the absorbed scraping oil with paper;

6, pay attention to the scraping parts to keep warm.

Electric welding operation steps

It's the welder's safety technical operating rules, right? It should not be a process.

A, welder must attend training and study, and through the operation certificate issued by the relevant departments, can work at his position.

Second, the welding machine must be well grounded or connected to zero, and the installation and removal of its power supply should be carried out by an electrician.

Three, electric welding machine to set up a separate switch, switch should be placed in the rain switch box, gloves should be worn when closing the lateral operation.

Four, a thunderstorm, should stop welding in the open air.

Five, oxygen cylinder, acetylene cylinder should be shockproof ring, tighten the helmet, avoid touching or violent vibration, and prevent exposure.

Six, when the ignition torch is not allowed to people, found that tempering should immediately turn off the switch.

Seven, the operator should wear insulating shoes, gloves and protective glasses when welding.

Eight, after the work, the oxygen cylinder, acetylene cylinder valve should be closed, or cut off the power supply of the welding machine, check the operation site, and confirm that there is no fire danger before leaving.

Bluebud operation steps

The first step is to turn on Bluetooth.

Second, turn on the Bluetooth of the device to be operated.

The third part, using mobile phone Bluetooth search.

Fourth, establish a connection between the mobile phone and the operating device.

How to design leaflets;

1. Set the scene first.

If you imagine a flyer as a play, then paper is the stage. Just like drama, the function of a good advertisement is to make people pay attention to your product.

2. Set the reference line:

Add a very thin border, which can be imagined as a curtain to guide the reader's line of sight to the middle content. This kind of wireframe must be very thin. If it is too thick and too bright, it will distract the reader.

3. Push the product to the front desk

Put your products in a conspicuous position on the page, just like when you invite friends to have a barbecue in your backyard, you will also put these chairs in a conspicuous place in the yard so that every guest can see and touch them.

4. Add a title:

Once you add a product picture to the page, the function of adding text is to reveal all kinds of details and guide readers to pay attention to the advantages or functions of the product, which can't be found just by looking at the product.

5, choose the right font:

There are many classic fonts, which give people a low-key and confident feeling and can make the products shine. These fonts have been carefully designed and are very suitable for words, so both the main title and the subtitle are fully qualified.