What styles of wrought iron partitions do you have? Precautions for installing partition board

The design of wrought iron partition in home decoration enriches the vision of home and makes the decoration effect of home more beautiful. With the development of the times, there are more and more styles of wrought iron partitions, and fashion elements are constantly added. Do you also want to live in a beautiful and artistic house? Then quickly install a wrought iron partition for your room! If you still have problems with the decoration of wrought iron partitions, let's take a look at the specific introduction with Bian Xiao!

1. What are the styles of wrought iron partitions?

Wrought iron partition style: You Ya Bo Gu moon door frame moon door antique Chinese teapot rack solid wood partition cabinet, Manshiguang Chinese classical solid wood partition Chinese antique furniture, two-sided carved partition screen, green heart porch rattan screen furniture.

There are many kinds of Chinese wrought iron partition doors, including closet doors, sliding doors, folding doors, sliding doors, movable track doors and closet doors.

Chinese-style wrought iron screen partitions the lobby hotel office Chinese-style fashion simple double-sided hollow single solid wood seat screen.

Chinese wrought iron Xiangyun hollow partition European ceiling screen white density board hollow lattice porch partition carved board.

Chinese wrought iron golden blessing to hollow wooden ceiling carved board entrance partition screen Chinese plaid symbolizes auspiciousness.

Second, the partition installation considerations

First, observe the construction environment. The most suitable time for construction is before on-site decoration. Then measure and locate, according to the construction drawing, release the position control line of the movable partition wall on the indoor ground, and lead the position line of the partition wall to the side wall and roof. The installation position line of the fixed part should be popped up when the line is played.

Installation of steel structure and track fixing parts. Steel structure is a load-bearing structure connecting the roof and the track. Steel structure is related to the safety of the whole movable partition system, so it must not be taken lightly. According to the construction drawing, blow screws on the roof, and then weld the fixed angle iron. According to the design requirements, choose the track fixing parts. Before installing the track, the sealing of walls, floors and ceilings should be considered to facilitate the installation of movable partitions. By calculating the weight of movable partition wall, the load borne by the track, the specifications and fixing methods of embedded parts are determined. The embedded parts of the track shall be installed firmly, and the track and the main structure shall be fixed firmly. All metal parts should be rustproof.

According to the installation method, accurately draw the pulley setting line on each panel, and then fix the pulley fixing frame on the upper stile or lower stile of the partition with screws. Then put the panels into the track one by one, adjust each panel to be vertical to the ground, push and pull flexibly, and finally connect and fix each fan. Usually, adjacent panels are connected by hinges. After the installation of the movable panel is completed, it is necessary to debug the panel height, sealing and other details. After debugging, clean up the site and complete the installation work.

The above is the style of wrought iron partition we introduced to you and the matters needing attention in partition installation. I hope you will have a deeper understanding of the installation of wrought iron partition after reading the article in Bian Xiao.