_ How does the smart door lock enter the networking mode?

1, press 3 and # to select network settings, then verify the administrator and enter Add Network.

2. Press the # key to switch the normal mode, and the 8-key LED light flashes, and then configure the network on the APP. This mode should be set when a single user allocates a network. You can also press the # key again to switch to compatibility mode, at which time the 8-key LED will slowly blink, and then select "Compatibility Mode" on the APP to configure the network. This mode is suitable for fingerprint lock users in hotels and apartments to add networks.

3. If the 8-key of the fingerprint lock flashes, and a prompt sound of "Adding successfully" is issued, the operation is successful. If the LED displays an "X" symbol and prompts "Failed to add", it needs to be added again. Note: In the second step, you can judge whether the fingerprint lock is in normal mode or compatible mode by looking at the blinking frequency of 8 keys, and then select the corresponding mode to add a network.