The room is very wet and the quilts are all wet. Sleeping is very uncomfortable. What can I do to get rid of the tide?

Moisture can be removed in the following three ways.

1, air conditioning: Now most air conditioners have dehumidification function, so you can dehumidify the room by turning on "dehumidification mode". However, the inside of the air conditioner should be cleaned regularly to avoid secondary pollution of the air conditioner.

2. Dehumidifier: Wet air is pumped into the dehumidifier by a fan and passes through a heat exchanger. At this time, the water molecules in the air condense into water droplets, and the treated dry air is discharged outside the dehumidifier. This cycle keeps the indoor humidity at an appropriate relative humidity.

3. Maintain indoor air circulation, often open windows for ventilation, and install exhaust fans in places such as bathrooms, kitchens and basements that are prone to damp and mildew when necessary.

Extended data:

If the ground moisture regain is too severe, the most effective measure is to implement professional ground moisture-proof liquid construction.

First, minimize the appearance of construction joints during moistureproof construction. Since the construction of the moistureproof layer is carried out after the completion of the civil foundation project, and it is a concealed project, the subsequent construction of the moistureproof layer should be considered during the construction to reduce the occurrence of unfavorable construction conditions for the moistureproof layer construction in advance.

Secondly, the time of moistureproof construction should be after the foundation room is backfilled to avoid the damage of backfill to the moistureproof layer. Clay or loess shall be used as the filling material for moistureproof ground, and 2: 8 or 3: 7 lime soil shall be used when conditions permit, and compacted by layers, with each layer being 20cm.

Third, deal with some details. Remove sundries, mortar, etc. On the base surface, water the brick before the construction of the moistureproof layer, and keep it fully moist. When the surface of the brick is slightly air-dried, the construction of moisture-proof layer should be started in time. These details seem small and unimportant, but they will greatly affect the failure of the moisture barrier. So please pay attention.

Baidu Encyclopedia-Zhongxing

People's Network-dehumidification tips