Traditional Culture Encyclopedia - Hotel accommodation - How to prevent slippery in bathing?
How to prevent slippery in bathing?
How to prevent slippery in shower room? The shower room is a place to take a bath, and it is inevitable that there will be water. This is due to the wet state, very slippery, and anti-skid measures need to be taken. Then let's share how to prevent slippery in the shower room.
How to prevent skid in shower room 1 cobblestones can be laid first, which is not only cheap, but also has good anti-skid effect and can play the role of foot massage; Secondly, floor tiles can be slotted or paved with tiles with good anti-slip performance; Finally, you can lay anti-slip mats or choose anticorrosive wood, which is waterproof and moisture-proof, and has anti-slip performance.
What should be paid attention to in shower room decoration:
1. Wiring before toilet decoration
First of all, don't casually install the shower room. Before the decoration, it must be arranged reasonably and the switch device should be made well, otherwise there will be the risk of leakage. Moreover, it is necessary to determine the location of the shower room. The location is inappropriate and should be adjusted as much as possible to avoid wasting space and causing inconvenience.
2. Determine the size of the shower room
Secondly, when installing a shower room, we should pay attention to the bathroom area and installation height. The shower room is too large or the installation height is too high, which will give people an uncomfortable feeling. In addition, the height of the shower room is similar to that of the bathroom, which is generally 2. 1 m. However, in actual operation, it may be necessary to increase 10 cm or so, and the water stop should be preset in advance.
3, the choice of shower room glass
Then, when decorating the shower room, we should pay attention to accessories such as glass. Some friends think that the thicker the glass, the better. As we all know, the glass area of plane shower room is large, but its stability is poor, so we must choose thicker glass, such as tempered glass above 5 cm. But for fan-shaped and square shower rooms, you only need to choose 5-differentiated glass.
4, shower room seepage control
Finally, when decorating the shower room, we should pay attention to the water seepage in the bathroom. After all, the bathroom uses a lot of water, so when installing the shower room, it is necessary to check the water seepage regularly and repair it in time if there is any problem, so as to avoid a lot of trouble in the later stage.
How to prevent slippery in shower room? 2 install anticorrosive wood. The contrast between installing anticorrosive wood in the bathroom and installing in other spaces is very different. It is not like closely connected floors, but there are many gaps between each floor, so that even the biggest water can flow away quickly and keep the bathroom dry at any time.
Install anti-skid brick, which is a kind of ceramic floor tile with wrinkles, stripes or concave-convex points on the front to increase the friction between the surface of the floor tile and the soles of human feet and prevent slipping and falling.
Placed anti-slip mat, anti-slip mat can effectively avoid slipping, but it is also easy to breed bacteria, so it should be cleaned regularly.
Paving pebbles in the bathroom is not only waterproof, but also anti-slip. The most important thing is that it can be used to massage our soles. Massage the soles of the feet can stimulate the meridians of the feet, which is very beneficial to the body.
Dry and wet separation. Separate the shower area from the bathroom to prevent the accumulated water area from getting bigger and people from slipping.
Install safety handrails, and install more handrails in the bathroom to give yourself a better support and prevent yourself from slipping. This method is best used with the previous method!
How to prevent slippery in shower room? 1. Non-slip floor tile
Anti-skid brick: Anti-skid floor tile is a kind of ceramic floor tile with wrinkles, stripes or concave-convex points on the front to increase the friction between the surface of the floor tile and the soles of human feet and prevent slipping and falling.
There are many kinds of non-slip bricks, both in style and color, which can meet your needs for space design.
Types of bathroom floor tiles
1, brick: good skid resistance.
At present, the most widely used anti-skid brick in the market is the integrated brick. This is a kind of brick with high pressure pressed stone chips, no glaze on the surface and the same positive and negative colors. The surface is rough, so the skid resistance is better.
2. Mosaic tiles: good slip resistance.
Mosaic floor tiles are generally made up of dozens of small tiles, which are relatively large and have a variety of styles. However, because the blocks are small and there are gaps between blocks, the anti-skid performance is good, but it is more troublesome to clean.
3. Polished tiles: poor slip resistance.
Polished brick is a kind of bright brick made by grinding and polishing the surface of the whole brick. The surface is smooth, so the anti-skid performance is not very good. Shopping in kitchens, bathrooms and other spaces with high anti-skid requirements is not recommended.
Second, the non-slip mat
Perhaps, when you see this anti-skid scheme, your decoration will be over; It doesn't matter if you don't choose non-slip bricks, you can choose non-slip mats, which will also reduce the situation that water is everywhere in the space and avoid accidentally slipping the soles.
Anti-skid pad in toilet is low-cost and practical. However, the anti-skid pad should be cleaned frequently to avoid bacterial growth.
In particular, put a non-slip mat outside the shower door or bathtub, because there is more water attached to the body and feet just after taking a shower. At this time, it is most necessary to use non-slip pads to absorb water.
Third, anticorrosive wood.
Anti-corrosion wood: chemical preservatives are artificially added to ordinary wood to make it anti-corrosion, moisture-proof, mildew-proof, insect-proof, mildew-proof and waterproof. Of course, it is because of the material itself. Anti-corrosion wood will make you feel that the sauna room is in your home, and the natural pastoral feeling will be there in minutes.
Compared with other spaces, the anticorrosive wood installed in the bathroom is very different. It is not like closely connected floors, but there are many gaps between each floor, so that even the biggest water can flow away quickly and keep the bathroom dry at any time.
The decorative effect of anticorrosive wood is not inferior to that of ceramic tiles, and no matter what kind of wall tiles are matched, they will look beautiful and generous. Xiao Nijun suggested that when selecting materials, it is best to choose anticorrosive wood floors with qualified indicators, and it is best to rinse a layer of wood paint, which can strengthen sealing, moisture and wear resistance.
Fourth, install handrails.
Installing safety handrails in toilets is an important measure to prevent the toilet from slipping. If there is an accident, you can pull the handrail to help yourself stand up straight, or you can have tension to avoid falling.
How to prevent slippery shower 4 1, anti-slippery tips: heating equipment.
Bathing in winter is a painful thing, and for the elderly, the heart will have a certain load problem, so it is best to have a warm air device in the bathroom, such as a warm air dryer, including ventilation, warm air, drying and cold air. When people take a bath in the cold winter, they can also keep a comfortable temperature, and at the same time, they can keep their friends, big and small, from catching a cold.
2. Anti-skid tip: safety handrail
Most families will not install safety handrails in the bathroom, but for the personal safety of the elderly and children at home, I suggest that it is necessary to install safety handrails. After all, the safety handrail can still play a certain role in borrowing power in some emergencies.
3. Anti-skid tip: water absorption pedal
Some families will put a towel at the junction of wet and dry toilets to dry their feet, so as to prevent them from slipping. Here, I suggest that it is best to buy a carpet with water absorption function to take away the moisture on your feet. After all, towels will get moldy if used for a long time.
4, non-slip tip: non-slip shallow bathtub
It can not only protect safety, but also be convenient and practical; The toilet can choose smart products or lift toilets, which can provide good power when the elderly or children are not strong enough.
5, non-slip tips: non-slip floor tiles
It is best to lay non-slip floor tiles in the bathroom to avoid slipping out of the bathtub or after taking a shower. If you prefer marble, it's best to do some special safety treatment on its surface, such as sandblasting and texture interleaving, which can play a good anti-skid effect.
- Previous article:From Ye to Panjin
- Next article:Is it not allowed to bring your own water at the isolation point?
- Related articles
- There are several forms of suspended ceiling.
- How to decorate Chinese New Year flowers?
- Brief introduction of dongguan Fenggang Jiahui wedding dress city co., ltd.
- How many AIDS carriers are there in Quanzhou?
- How to see the authenticity of Guojiao 1573 from the outer packaging?
- Which street is Suzhou Windham Garden Hotel?
- How about Tangshan Hong Wen Business Information Consulting Co., Ltd.
- Is the hotel business next to the exhibition good?
- How to get from Chengdu to Lezhi?
- Which bus should I take from Wenzhou Jin Ya Hotel to Jinjiang Inn?