How long does it take from Baise to Jingxi?

Question 1: How long does it take from Baise, Guangxi to Jingxi County? It takes about 3.5 hours by bus. There is a direct bus from Baise Bus Terminal to Jingxi, and the fare is 50 yuan. As for the frequency of departure, you just go to the station for consultation. I hope my answer can help you.

Question 2: How many kilometers from Baise to Jingxi, including entering the city? 5-minute driving route: the whole journey is about188.0km..

Starting point: Baise City

1. Baise driving plan

1) Start from the starting point to the northwest, drive along Xiangyang Road 120 meters, pass the Tian Xiang Shopping Center on the left for about 90 meters, then turn left and enter G323.

2) Drive along G323 for 3 10 meters and turn left ahead.

3) Drive for 20 meters and turn left into Xinxing Road.

4) Drive along Xinxing Road 1.5km, cross Nabi Bridge about 140m, and go straight into Nabi Avenue.

5) Drive along Nabi Avenue for 2.0km and turn left into G323.

6) Drive along G323 for 500m, turn right and enter G324.

7) Drive along G324 for 6.4 kilometers, cross Saihao for about 200 meters, and turn left.

8) Drive for 260m and turn right slightly towards Nanning.

9) Drive 640m and enter G78 at the entrance.

10) Follow G78 19.9 km and turn right slightly in the direction of Hechi/Nanning /G78/G80.

2. Drive 920 meters and enter G80 at the entrance.

3. Drive along G80 for 42.0km, get off at Xiangzhou/Debao Exit and enter Xiangzhou Interchange.

4. Drive along Xiangzhou Interchange 1. 1 km, go to Debao/Jingxi, turn right slightly and enter Xiangzhou Interchange.

5. Drive along Xiangzhou Interchange for 70 meters and turn right into S2 10.

6. Drive along S2 10 for 60.3km and go straight into the tunnel.

7. Drive along the tunnel 1.4km, turn right slightly and turn into Desheng Road.

8. Jingxi County Driving Scheme

1) Drive along Desheng Road for 2.5km and turn left into S2 13.

2) Follow S2 1315.3km, cross Wangxing Bridge and turn right.

3) Drive 690 meters straight.

4) Drive 6.8km and go straight.

5) Drive 8.7 kilometers and turn left.

6) Drive 1.4km and turn right ahead.

7) Turn left after driving 80 meters.

8) Turn right after driving for 4.5 kilometers.

9) Drive 8.8km and turn right into Chengdong Road.

10) Drive along Chengdong Road for 560m and turn left.

1 1) Drive for 20 meters, turn right ahead and enter Chengzhong Road.

12) Drive along Chengzhong Road for 470 meters and turn left.

13) Drive for 2 10 meters and go straight into renmin street.

14) Drive along renmin street for 70 meters and reach the terminal (on the left side of the road).

End point: fear board in Jingxi county

Question 3: How long does it take from Baise to Jingxi? It takes about 3.5 hours by bus.

There is a direct bus from Baise Bus Terminal to Jingxi, and the fare is 50 yuan.

As for the frequency of departure, you just go to the station for consultation.

I hope my answer can help you.

Question 4: How many kilometers is the driving route from Baise to Gaoshu Road in Jingxi? The whole journey is about 133.5 km.

Starting point: Baise City

1. Baise driving plan

1) Start from the starting point to the northwest, drive along Xiangyang Road 1 10 meters, pass the south gate of Sunshine Beauty Shopping Mall on the right, turn left and enter Chengbei No.1 Road.

2) Drive 30 meters along Chengbei No.1 Road, pass Gree Air Conditioning for about 280 meters on the right, and go straight into Chengbei No.2 Road.

3) Drive along Chengbei Second Road 1.9 km and go straight into Chengxi Road.

4) Drive along Chengxi Road 1.4km, turn right in the direction of Berlin Avenue and enter Dongzeng Road.

5) Drive along Dongzeng Road for 990 meters and go straight.

2. Drive 1. 1 km, turn right and enter Guang Kun Expressway.

3. Drive along Guangkun Expressway for 23.6 kilometers, turn right slightly in the direction of Debao/Jingxi /G69 and get on the ramp.

4. Drive along the ramp for 580m and go straight into expressway, Bai Yin.

5. Take Bai Yin Expressway 96. 1km, get off at Daxin/Jingxi /S3 16, and turn right slightly on the ramp.

6. Drive along the ramp 1.0km, turn left and enter S3 16.

7. Jingxi County Driving Scheme

1) Drive 2.7 kilometers along S3 16, cross wulong village on the right for about 240 meters, and go straight into S2 10.

2) Drive along S2 10 for 630m, cross the left bridge for about 80m, then turn left slightly and enter Fenghuang Road.

3) Drive along Fenghuang Road 1.8km and turn right into Chengzhong Road.

4) Drive along Chengzhong Road for 250 meters, pass by Jingchun Electric Appliance Store in Jingxi County on the right for about 230 meters, and then turn right into Xue Qian Street.

5) Drive 200 meters along Xue Qian Street and go straight into Renmin Street.

6) Drive along renmin street for 70 meters and reach the destination (on the left side of the road).

End point: Jingxi county

Question 5: How far is it from Baise to Jingxi? It's fast to take the expressway, and you can get there in an hour?

Question 6: How many kilometers is it from Baise to Jingxi, about 133.5 kilometers/1 50 minutes per hour?

Question 7: How long does it take from Baise, Guangxi to Jingxi? How much is the ticket? Take the train to Baise, and then take a bus to Jingxi at Baise Bus Terminal.

Take a bus to Baise, and then take a bus to Jingxi at Baise Bus Terminal.

Want 90 yuan?

Question 8: How long does it take to get from Jingxi to Baise by bus? Urgent! ! ! From Baise to Jingxi: The express train takes 3.5 hours, the fare is in 47 yuan (probably during Spring Festival travel rush), and the slow train in 27 yuan will be attractive, so it will take more than 4 hours to get to Jingxi. Convenient transportation and good road conditions. When I arrived in Jingxi, the scenery along the way was beautiful.

Question 9: How far is the driving route from Baise Station in Guangxi to Jingxi High-speed Railway? The whole journey is about124.0km.

Starting point: Baise Station

1. Start southeast from the starting point, drive for 30 meters and turn right.

2. Drive 50 meters and go straight into the entrance avenue.

3. Drive along the entrance avenue1.2km and turn left into Chengdong Avenue.

4. Drive along Chengdong Avenue 1.6 km and go straight into Ruilin Line.

5. Drive along the Ruilin line for 5.0 kilometers, and then turn right.

6. Drive towards Nanning 1.2km, turn left slightly and enter Baise East Interchange.

7. Drive along Baise East Interchange for 720 meters and turn right into expressway, Guang Kun.

8. Drive along Guangkun Expressway11.2km and turn right slightly on the ramp leading to Debao/Jingxi /G69.

9. Drive along the ramp for 550 meters and turn right into expressway, Bai Yin.

10. Drive along Bai Yin Expressway for 95.8km, exit Daxin/Jingxi /S3 16, turn right slightly and get on the ramp.

1 1. Drive along the ramp for 480 meters and then go straight.

12. Drive 600 meters and turn left to enter S3 16.

13. Follow S3 16 for 2.9 kilometers and go straight into Fenghuang Road.

14. Drive along Fenghuang Road for 7 10 meters, turn right slightly and enter Chengxi Road.

15. Drive along Chengxi Road 1.6 km, pass the commander-in-chief electric appliance (Jingxi Guangyuan Store) on the left for about 80 meters, and turn right into the pre-school road.

16. Go along Xue Qian Road 100 meters, then turn right.

17. Drive 80 meters and go straight into renmin street.

18. Drive along renmin street for 70 meters and reach the terminal (on the left side of the road).

End point: Jingxi county

Question 10: How long does it take to get from Jingxi to Baise, and how much is it by car? Last year, I took the express train for more than 60 to 70 hours (although some local drivers drove faster than the express train). It takes about 4 hours for a slow class of more than 50.