What is the standard of hotel sockets in Taiwan Province Province?

Taiwan Province province uses American standard, 1 10V voltage system. Two-pole flat plug wide voltage input appliance can be used directly. Three flat plugs need a converter, and those with 220V voltage input need a step-up transformer. The hotel may provide a conversion head.

Most of the electrical appliances of mainland friends, such as mobile phone/tablet/camera charger, notebook computer, etc. , are applicable to the voltage of 1 10-240v (as shown in the figure below), and no transformer is needed.

Except for high-power appliances such as hair dryers, the voltage of electrical appliances in Chinese mainland is mostly 220 volts. Of course, almost all hotels and homestays in Taiwan Province Province have hair dryers borrowed for free, so there is no need to bring them from Chinese mainland.

Extended data:

1, the installation height of the socket shall be installed according to the design requirements when specified in the design; When the design is not clear, it should generally meet the following requirements: the socket with safety door is not less than 0.3M；; The outlet without safety door shall not be less than1.8m. It is recommended to buy the outlet with safety door as much as possible, because the price difference between them is not big.

2. Bathrooms or other damp places should use well-sealed waterproof and splash-proof sockets. Three hole socket, when inserting the plug, the grounding pile head is inserted into the hole first, and the mechanism in the socket opens the other two hole doors. The two-hole socket must be inserted into the socket pile head at the same time before the safety door can be opened, so as to prevent children from inserting metal objects by mistake and causing safety accidents.

3. When the socket is installed, its panel should be straight and close to the wall. Moreover, the wiring (phase) should conform to: single-phase two-hole socket, the right hole or upper hole facing the socket is connected with the phase line (live wire), and the left hole or lower hole is connected with the zero line; Single-phase three hole socket, the right hole facing the socket is connected with the phase wire (L, live wire), the left hole is connected with the neutral wire (N), and the upper hole is connected with the ground wire (PE).

References:

Baidu encyclopedia-socket