Where is the drain of the shower room? How to drain the shower room?

The drainage of shower room is very important for the bathroom and even the whole family. If the position or type of the drain is wrong, it will block the water, or the water will overflow Jinshan, damaging the furniture and appliances at home and affecting the whole house. Today, Bian Xiao will talk to you about the location of the drain in the shower room and how to drain it. I hope I can help you to some extent.

Where is the drain of the shower room?

1. In the case of ceramic tile drainage, the drainage outlet is located at a low slope.

Regarding shower drainage, tiling is common. The most important thing is that the whole tile should be inclined to the direction of floor drain, so the drain will be set at a lower slope to facilitate drainage.

2. When the stone trough is drained, the drainage outlet is on the side.

If there is a stone in the middle of the shower room, and there is a slit in the stone as a diversion groove, then the floor drain position must be pulled over. If the sewer pipe of the house itself is not on the side, it needs to be replaced when doing water and electricity, and if the position of the sewer pipe is changed, it is likely that the odor-resistant floor drain will not fit, so the depth of the drain pipe should be at least 6 cm, and it is of course best to exceed 12 cm. After all, odor prevention is very important.

1, stone trough drainage

Spread a stone on the floor of the shower area and pull a groove on the stone to drain water. On the one hand, it is anti-slip, on the other hand, it is countercurrent. The stone is surrounded by a low circle to drain water, and then the floor drain is placed against the wall. Analyze various problems according to the difference of shower rooms, such as brick shower rooms. As long as a semicircular drainage groove is made on the side near the glass, the drainage effect will be better.

2, slope drainage

The traditional drainage technology is slope drainage. When laying tiles, a certain inclination will be formed. The floor drain is installed in the lowest place, and the water flows downwards, which can meet the basic drainage needs. Slope drainage is an early drainage technology, which has become a "habitual" drainage treatment method in the industry and is still very common at present. However, with the passage of time, the problems in slope drainage have gradually emerged, and water accumulation and slippage have become the pain points of consumers and need to be solved urgently.

3. Sinking and drainage

Sinking drainage can be combined with long floor drain and wall drainage. It can quickly remove moisture and has a beautiful design. Convenient and waterproof, and suitable for modeling.

The above information is shared by Bian Xiao about where the shower drain is and how to drain it. I hope it helps you.