What are the skills of flue reconstruction?

When a friend decorates a house, the most important thing is flue decoration, especially flue renovation. Although the process of flue reconstruction is not particularly complicated, there are many places that need our attention during flue reconstruction, and whether the flue reconstruction is good or not requires certain skills. What are the methods and precautions for flue reconstruction?

First, what are the skills of flue reconstruction?

1. When preparing the kitchen flue reconstruction, remember to keep the auxiliary flue, because every kitchen has a flue, and the flue is divided into a main flue and an auxiliary flue. The main flue runs through all buildings, while the auxiliary flue is relatively independent. Generally, the lampblack in the home will enter the auxiliary flue first, and then enter the main flue through the hole in the partition, so as to ensure that the lampblack in every household is isolated.

2. Attention should also be paid to the construction details. First, it is very important to choose the installation location of the range hood. The shorter the pipe, the better. Some owners will pull the pipe longer for the sake of beauty. After turning off the range hood in this way, there will be a lot of oil smoke in the pipeline that cannot be discharged, and even worse, it will fall back indoors. In addition, in order not to destroy the original main and auxiliary flue, its opening direction cannot be changed at will.

3. Pay attention to safety when smoking windows. In order to avoid smoke crosstalk, some owners will give up the original flue and directly open holes in the windows to exhaust smoke. This is ok, but there are a few points to pay attention to. First, before opening a hole in a window or wall, it must be approved by the property; Secondly, pay attention to safety issues.

4. Generally, the ends of smoke exhaust pipes are all metal. If the hole is too small, metal heat transfer may cause the glass to burst and hurt passers-by. Moreover, the exhaust pipe leads out of the window, and the strong north wind blows head-on, which will lead to the backflow of lampblack. It's best to put down the extended pipe to prevent rainwater from flowing into the pipe when it rains, and the windshield is blocked out.

It is estimated that many owners have encountered the phenomenon of flue odor, which is actually improper installation of flue. When installing the flue, everyone should keep the auxiliary flue. There are flues in our kitchen, including main flue and auxiliary flue. The main flue runs through the whole building, while the auxiliary flue is independent.

Second, what are the precautions for flue reconstruction?

1. Generally, the lampblack at home will go to the auxiliary flue first, and then enter the main flue through the hole in the partition, so as to ensure that the lampblack of every household is isolated. However, if the auxiliary flue is directly connected with the main flue, it will lead to smoke back or smoke string because of low pressure.

2. In order to make the cooking room look more beautiful, some people will use hidden installation, which will lead to the pipeline being pulled too long, so that after the range hood is turned off, the oil smoke in the pipeline cannot be discharged and then poured back indoors. Therefore, the installation position of the range hood should be selected, and the shorter the pipeline, the better.

3. Also, in order not to destroy the original main and auxiliary flue, the opening direction is not changed casually, so it must be placed in the auxiliary flue.

When decorating this flue, everyone must pay attention to the surrounding environment, and personal safety is also very important. Secondly, the transformation of the flue needs to use all kinds of equipment, and the quality should be selected to avoid re-transformation in the future.

Friends can refer to the above flue reconstruction methods and matters needing attention in this flue reconstruction, hoping to bring you some gains.