How many kilometers is it from Yangshuo to Wuzhou?

Question 1: How many kilometers is the driving route from Wuzhou to Yangshuo Expressway? The whole journey is about 236.6 kilometers.

Starting point: Wuzhou City

1. Wuzhou driving plan

1) Drive 80 meters southeast from the starting point and turn left ahead.

2) Drive 60 meters and turn left into Ochri Road.

3) Drive along Aochili Road 180m, turn left and enter Xinxing No.3 Road.

4) Drive along Xinxing No.3 Road 2. 1km, after passing the boutique chain of Weilijia on the right for about 70m, turn right slightly and enter Hongling Road.

5) Drive along Hongling Road for 570 meters, turn right and enter Shun Di Avenue.

6) Drive along Shun Di Avenue1.2km, and then turn left.

7) Drive 1.3km, and go straight into the Wuzhou connecting line of Baomao Expressway.

8) Drive 300 meters along the Wuzhou connecting line of Baomao Expressway and go straight into the Wuzhou connecting line of Baomao Expressway.

9) Drive 5.3km along the Wuzhou connecting line of Baomao Expressway, turn right slightly towards Guilin and get on the ramp.

2. Drive along the ramp for 380 meters and go straight into Baomao Expressway.

3. Drive along Baomao Expressway for 2 12.9 km, get off at Yangshuo/Lipu /G32 1 exit, and turn right slightly on the ramp.

4. Drive along the ramp 1.7km, cross Yangshuo Interchange and turn left into G32 1.

5. Driving scheme of Yangshuo County

1) Follow G32 1 for 6.6 kilometers and go straight into the Anti-Japanese War Road.

2) Drive along Anti-Japanese War Road 2. 1km, cross Guanghui Electric Appliance on the left and go straight into Taopan Road.

3) Drive along Taopan Road for 720 meters, turn right and enter Taopan Road.

4) Drive 30 meters along Taopan Road, take the 1 exit, turn right into Diecui Road, and drive in the direction of Diecui Road/binjiang road/Yacht Wharf.

5) Drive 700 meters along Diecui Road, cross Shuangyue Bridge and turn left into Xianqian Street.

6) Drive along Xianqian Street, cross Shuangyue Bridge for about 1 10 meters, and reach the destination (on the right side of the road).

End point: Yangshuo County

Question 2: How far is Cangwu County, Wuzhou City, Guangxi from Yangshuo? The whole journey is about 256.6438+0 km.

Starting point: Cangwu County

1. Cangwu County Driving Plan

1) Start east from the starting point, drive for 90 meters, turn right ahead and enter Zhengxian Road.

2) Drive along Zhengxian Road for 500m, turn right and enter G207.

3) Drive along G207 1.5 km and go straight into G207.

4) Drive along G207150m, take the third exit, and turn left into Southwest Avenue.

5) Drive along Southwest Avenue for 2.0km and go straight into G207.

6) Drive along G207 for 590 meters and turn left on the ramp.

2. Drive along the ramp for 890 meters, cross Cangwu South Interchange for about 60 meters, and then go straight into expressway, Guang Kun.

3. Drive along Guang Kun Expressway129.3km, at the exit of Silao/Antang, turn right slightly and get on the ramp.

4. Drive along the ramp for 690 meters and turn left into G324.

5. Drive along G324 for 8.0km, drive in the direction of Xinxing/Yangchun, turn right and enter S276.

6. Drive along S276 19.9 km and go straight into Huanggang Avenue.

7. Drive along Huanggang Avenue 1.2km, pass the right slope for about 90m, and go straight into Xinzhou Avenue North.

8. Drive along Xinzhou Avenue North 150m, pass the right slope village about 130m, and go straight into Xinzhou Avenue North.

9. Drive along Xinzhou Avenue North for 320 meters, take the 1 exit, and turn left into Xinzhou Avenue North.

10. Xinzhou Avenue goes north for 740 meters and turns right into Yunzhou Road.

1 1. Drive along Yunzhou Road 1.5km, turn left and enter the west section of Second Ring Road.

12. Drive along the west section of the Second Ring Road 1.8km, and turn right into the west of Guangxing Avenue.

13. Go west along Guangxing Avenue 140m and go straight into S 1 13.

14. Follow S 1 13 1 1.0km and go straight into Xinjie.

15. Drive along Xinjie 2. 1km, and go straight into S 1 13.

16. Follow S 1 1318.4km and go straight into Guang Hai North Road.

17. Drive along Guang Hai North Road 1.3km, cross Mawangzhai on the right 1 10m, and then go straight into Guang Hai Middle Road.

18. Drive along Guang Hai Middle Road1.4km and go straight into Guang Hai South Road.

19. Drive along Guang Hai South Road1.8km and go straight into S 1 13.

20. Drive along S 1 13 for 43.9 kilometers and go straight into Chengdong Avenue.

2 1. Yang Chun internal driving scheme

1) Drive 5.8km along Chengdong Avenue and turn right into Fu Qian Road.

2) Drive along Fu Qian Road for 370 meters, and then turn right.

3) Drive 10 meter to the finish line (on the right side of the road).

Destination: Yang Chun.

Question 3: How far and how many kilometers is it from Guilin to Yangshuo? How long does it take to drive? Driving route: the whole journey is about 72.5 kilometers, 1 hour and 34 minutes.

Starting point: Guilin

1. Guilin city driving scheme

1) Depart from the starting point to the southeast, drive along Wu Mei Road for 230m, cross Suning Jinmadian on the right, and turn right into Zhongshan Middle Road.

2) Drive 580m along Zhongshan Middle Road, cross Nanmen Bridge and enter Zhongshan South Road.

3) Drive 2.3km along Zhongshan South Road, cross Bayi Bridge and go straight into Chongxin Road.

4) Drive along Chongxin Road 1.8km and go straight into Wayao West Road.

5) Drive along Wayao West Road for 750 meters, cross 306 Xuanyue 140 meters on the right, and go straight into Kaifeng Road.

6) Drive 4.5km along Kaifeng Road and go straight into xiang tang Road.

7) Drive along xiang tang Road for 5. 1km and go straight into xiang tang Road.

8) Drive along xiang tang Road 1.4km, cross Guilin South Interchange Bridge about 160m, and go straight into Guilin Ring Expressway.

9) Drive 4.5km along Guilin Ring Expressway, head for Yangshuo/Wuzhou, turn left slightly and get on the ramp.

2. Drive along the ramp for 790 meters, cross the horse surface for about 390 meters, and go straight into Baomao Expressway.

3. Drive along Baomao Expressway for 33.7 kilometers, cross Yulong River Bridge, at Baisha/Jinbao exit, turn right slightly and get on the ramp.

4. Drive along the ramp 1.3km, cross Baisha Interchange, turn right and enter X099.

5. Driving scheme of Yangshuo County

1) Drive along X099 for 4.8km, and turn right into G32 1.

2) Drive along G32 1 for 7.6 kilometers, pass the Yijing Hotel on the left for about 200 meters, and enter Chengxi Road.

3) Drive 470 meters along Chengxi Road, head for downtown/West Street, turn left slightly and enter Taopan Road.

4) Drive along Taopan Road for 860m, and turn left towards Diecui Road/binjiang road/Cruise Terminal.

5) Drive 40 meters, take the 1 exit, and go straight into Diecui Road.

6) Drive 700 meters along Diecui Road, cross Shuangyue Bridge and turn left into Xianqian Street.

7) Drive along Xianqian Street, cross Shuangyue Bridge for about 1 10 meters, and reach the destination (on the right side of the road).

End point: Yangshuo County

Question 4: How far is it from Wuzhou to Yangshuo? Guiwu expressway has been opened, and the total length of expressway from Yangshuo to Wuzhou is 238 kilometers: Yangshuo-Pingle-Majiang-Wuzhou. You don't have to go through the national highway in Hezhou.

Question 5: How many hours does it take to take the expressway from Wuzhou to Yangshuo, about three and a half hours?

Question 6: How many kilometers is the driving route from Guilin to Yangshuo? The whole journey is about 72.7 kilometers.

Starting point: Guilin

1. From the starting point to the east, drive along Wu Mei Road for 250 meters, cross Suning.cn (Jinmadian) on the right, and turn right into Zhongshan Middle Road.

2. Drive along Zhongshan Middle Road for 270 meters. Go about 220 meters past Wuzhou Building on the left, and go straight into Zhongshan South Road.

3. Drive along Zhongshan South Road for 2.5km and go straight into Chongxin Road.

4. Drive along Chongxin Road 1.8km and go straight into Wayao West Road.

5. Drive 900 meters along Wayao West Road, head for Kaifeng Road/Yangshuo/Ring Expressway, and go straight into Kaifeng Road.

6. Drive along Kaifeng Road for 4.7 kilometers, and go straight into Guangcheng Line.

7. Drive along the Guangzhou-Chengdu line for 5.8km, turn right and drive in the direction of S220 1/ Wuzhou/Yongzhou/Liuzhou.

8. Drive 390 meters in the direction of Liuzhou/Wuzhou/Airport/Huaihua, turn right slightly and get on the ramp.

9. Drive 330 meters along the ramp and go straight into Guilin Ring Expressway.

10. Drive 4.5km along Guilin Ring Expressway, turn left slightly in the direction of Yangshuo/Wuzhou, and get on the ramp.

1 1. Follow the ramp 1.2km and go straight into Baomao Expressway.

12. Drive along Baomao Expressway for 33.8km, at Baisha/Jinbao exit, turn right slightly and get on the ramp.

13. Drive along the ramp for 370 meters and go straight.

14. Go 9 10 meters and turn right ahead.

15. Drive 1.4km and turn left.

16. Drive for 3.4 kilometers, turn right and enter the Guang-Cheng Line.

17. Drive 7.4 kilometers along Guang-Cheng Line and go straight into Chengxi Road.

18. Drive along Chengxi Road for 840 meters, turn left slightly in the direction of downtown/West Street, and enter Taopan Road.

19. Drive along Taopan Road for 720 meters. After passing 2 yuan Qijiaping Department Store on the right for about160m, turn left and drive in the direction of Diecui Road/binjiang road/Cruise Terminal.

20. Drive 40 meters, take the 1 exit, and go straight into Diecui Road.

2 1. Drive along Diecui Road for 550 meters and turn left into Furong Road.

22. Drive along Furong Road for 1 10 meters, and then turn right into Fu Qian Lane.

23. Follow Fu Qian Lane160m to the finish line (on the left side of the road).

End point: Yangshuo County

Question 7: The travel time from Wuzhou to Yangshuo and from Yangshuo to Wuzhou is 10. There are fewer flights in Yangshuo and more flights in Guilin.

The frequency of Yangshuo can't be found, and there are many in Guilin. From the map, the frequency of Guilin will not exceed Yangshuo, and it takes time to get in and out of the city at high speed.

Question 8: How far is it from Guilin to Wuzhou? It is 320 kilometers from Guilin to Wuzhou. You can take a bus at Guilin Bus Station (Address: No.65, Zhongshan South Road, Guilin, Guangxi Zhuang Autonomous Region). The earliest departure time is 6: 40, and the latest departure time is 23: 00, with daily flight 17.

Question 9: How many kilometers is the driving route from Yangshuo to Nanning? The whole journey is about 388.2 kilometers.

Starting point: Guilin

1. Guilin city driving scheme

1) Depart from the starting point to the southeast, drive along Wu Mei Road for 60 meters, and go straight into the traffic road.

2) Drive along the traffic road for 20 meters and go straight into Wu Mei Road.

3) Drive along Wu Mei Road 160m, pass through Jinma Store of Suning Appliance on the left, and turn right into Zhongshan Middle Road.

4) Drive 580m along Zhongshan Middle Road, cross Nanmen Bridge and enter Zhongshan South Road.

5) Drive along Zhongshan South Road 1.0 km, cross the Shanghai Road overpass, drive in the direction of Shanghai Road, and turn right into Shanghai Road.

6) Drive along Shanghai Road150m, cross Shanghai Road overpass about150m, and go straight into Cuizhu Road.

7) Drive along Cuizhu Road 1.9 km and enter Qintan Road.

8) Drive along Qintan Road for 2.2km and go straight into Lushan Road.

9) Drive along Lushan Road for 5.0km and go straight into Lushan Road.

10) Drive along Lushan Road 180m, take the third exit, turn left in the direction of Airport Expressway /G65/G72/ Airport, and enter Airport Road.

1 1) Drive 6.5km along Airport Road and go straight into Airport Expressway.

12) Drive along the airport expressway for 2 10 meters and go straight into the airport expressway.

13) Drive 840 meters along the airport expressway, cross Liaotian Interchange Bridge, head for Liuzhou/Wuzhou /G65/G72, turn right slightly and get on the ramp.

14) Drive along the ramp for 330m, cross Liaotian Bridge, turn right ahead and enter Guilin-Liuzhou Expressway.

15) Drive 5.5km along Guilin-Liuzhou Expressway, cross Chongkou Village Separation Interchange Bridge, turn slightly right in Nanning/Liuzhou direction and enter Guilin-Liuzhou Expressway.

2. Drive along Guilin-Liuzhou Expressway 1.4km and go straight into Guilin-Liuzhou Expressway.

3. Drive along Guilin-Liuzhou Expressway for 26.3 kilometers, cross Yongfu Xihe Bridge, and go straight into Xiawan Separated Interchange Bridge.

4. Drive 50 meters along Xiawan Separation Interchange Bridge, cross Xiawan Separation Interchange Bridge and go straight into Guiliu Expressway.

5. Drive 720 meters along Guilin-Liuzhou Expressway, cross the separated overpass bridge at the bend, and go straight into the separated overpass bridge at the bend.

6. Drive 60 meters along the separated overpass bridge at the corner, cross the separated overpass bridge at the corner and go straight into Guilin-Liuzhou Expressway.

7. Drive along Guilin-Liuzhou Expressway for 6 10/0m, cross Ping Ling Bridge and go straight into Ping Ling Separated Interchange Bridge.

8. Drive 70 meters along Ping Ling Separation Interchange Bridge, cross Ping Ling Bridge and go straight into Guilin-Liuzhou Expressway.

9. Drive along Guilin-Liuzhou Expressway for 2 1.6km, pass through Houzhou on the left side for about 1.7km, and go straight into Chaoshui Tunnel.

10. Drive along Chaoshui Tunnel for 580m and go straight into expressway of Guiliu.

1 1. Drive along Guilin-Liuzhou Expressway 10.0km, cross Dadou Bridge (1), and go straight into Dadou Tunnel.

12. Drive along DaDuan Tunnel for 600 meters and go straight into Guilin-Liuzhou Expressway.

13. Drive along Guilin-Liuzhou Expressway 15.7km, cross Dongkou Village Separation Interchange Bridge and go straight into Dongkou Village Interchange Bridge.

14. Drive 30 meters along Dongkou Village Interchange Bridge, cross Dongkou Village Separation Interchange Bridge, and go straight into Guiliu Expressway.

15. Drive along Guilin-Liuzhou Expressway for 29.7km, cross Ling Du Bridge and go straight into Liunan Expressway.

16. Drive along Liunan Expressway for 39.4km, cross Xinxing Middle Bridge for about1.4km, and go straight into Tongguyan Separation Interchange Bridge.

17. Drive 70 meters along Tongguyan Separation Interchange Bridge, cross Tongguyan Separation Interchange 1 Bridge and go straight into Liunan Expressway.

18. Drive along Liunan Expressway 152. 1km, cross Gui Xiang Railway Overpass and go straight into Nanwu Expressway.

19. Drive along Nanwu Expressway for 50.9 kilometers, cross the Naping Bridge, head for Beihai/Airport/Youyiguan/Hechi, turn right slightly and enter Nanwu Expressway.

20. Drive along Nanwu Expressway for 920 meters, cross Nanning East Interchange for about 800 meters, and go straight into Nanwu Expressway.

2 1. Nanning driving plan

1) Drive along Nanwu Expressway 130m and go straight into Nanwu Expressway.

2) Drive along Nanwu Expressway for 340 meters and go straight into Minzu Avenue.

3) Drive 5.4 kilometers along Minzu Avenue, pass Guangxi Development Building on the right about 60 meters, and enter Jinzhou District Road.

4) Drive along Jinzhou District Road for 70 meters. After passing the Guangxi Investment Building on the left for about 90 meters, turn left and enter Laibin Road South Yili.

5) Drive along the south first mile of Jiabin Road 120m, and turn right into the south second mile of Jiabin Road.

6) Drive 220 meters along the south second mile of Jiabin Road to reach the destination ... >>

Question 10: How long does it take to get from Yangshuo to Nanning, how far is it from Yangshuo to Nanning, and how many kilometers is the driving route? The whole journey is about 405.4 kilometers.

Starting point: Yangshuo County

1. Guilin city driving scheme

1) Start south from the starting point, drive along Xianqian Street 100 meters, and turn right into Diecui Road.

2) Drive along Diecui Road for 660m, go to Jessie/South Passenger Station, and go straight into Diecui Road.

3) Drive along Diecui Road for 90 meters and turn left into Taopan Road.

4) Drive along Flat Peach Road for 700 meters. After passing through Xinyibao Electric Appliance on the right for about 70 meters, turn left slightly in the direction of Anti-Japanese War Road/Guangzhou/Liuzhou/Impression Liu Sanjie and enter Anti-Japanese War Road.

5) Drive along the Anti-Japanese War Road 2. 1km, and go straight into G32 1.

6) Drive along G32 1 for 340 meters and enter Guangzhou-Chengdu Line.

7) Drive 2.6km along the Guang-Cheng Line, pass the Yin Da Cultural Landscape Park in Yangshuo on the left for about170m, and go straight into the Gongnong Bridge.

2. Drive along Gongnong Bridge 100m, and go straight into Guangzhou-Chengdu Line.

3. Drive 29.7 kilometers along Guang-Cheng Line and go straight into G32 1.

4. Go along G32 1 1.6km, and go straight into Guang-Cheng Line.

5. Drive 2 10 meters along Guang-Cheng Line and go straight into Li Gui Road.

6. Drive along Li Gui Road for 920 meters and turn left into Li Gui Road.

7. Drive along Li Gui Road 1.5km, turn left slightly in the direction of Wuzhou/Mengshan/Pingle and enter Guiping Road.

8. Drive along Guiping Road for 980m and go straight into Huandong Road.

9. Drive along Huandong Road 1.2km and go straight into Lita Road.

10. Drive along Lita Road for 650m, cross Keyu Electric Appliance on the left for about160m, and go straight into Lita Road.

1 1. Drive along Lita Road for 20 meters, pass by Shunfeng Electric Appliance (No.3 Disc Shop) on the right about 1 10 meters, take the second exit, head for Liuzhou, and go straight into Lita Road.

12. Drive along Lita Road for 440 meters and enter Lita Road.

13. Drive along Lita Road 1 10 meters, take the second exit and go straight into Lita Road.

14. Drive along Lita Road1.3km, drive in the direction of Liuzhou, and turn left into Ruilin Line.

15. Drive along Ruilin Line for 8 1.7km and go straight into Hengyou Line.

16. Drive along Hengyou Line for 9.2km, cross Wenxuan Building on the left, drive to Guiliu Expressway, turn left slightly and enter Lufei Avenue.

17. Drive along Luffy Avenue for 640 meters, turn left slightly and enter Luffy Avenue side road.

18. Drive 30 meters along the auxiliary road of Luffy Avenue, pass the air conditioner of Dongyuan automobile on the right for about 80 meters, then turn left slightly and enter Luffy Avenue.

19. Drive along Luffy Avenue1.8km and turn left on the ramp.

20. Drive along the ramp for 290 meters, turn right ahead and enter Yingbin Road.

2 1. Drive along Yingbin Road 1. 1 km, head for Liuzhou, turn right slightly and get on the ramp.

22. Drive along the ramp for 400 meters and go straight into Quannan Expressway.

23. Drive along Quannan Expressway for 258.6438+0km and go straight into Quannan Expressway.

24. Drive along Quannan Expressway 150m and go straight into Minzu Avenue.

25. Nanning driving scheme

1) Drive along Minzu Avenue for 5.8 kilometers, pass Guangxi Development Building on the right for about 70 meters, and then enter Jinzhou District Road.

2) Drive along Jinzhou District Road for 60 meters, pass Guangxi Investment Building on the left for about 250 meters, and then turn left into Jiabin Road.

3) Drive along Jiabin Road for 80 meters and turn right.

4) Drive 10 meter to the finish line.

End point: Nanning