Brand recommendation and classification introduction of ventilation skylight

The advantage of ventilated skylight is obvious, that is, ventilation is used to help indoor air circulation, thus ensuring everyone's actual comfort, so it is still a necessary product component for users. However, there are many similar products on the market, and different brands or models vary greatly. Only by comprehensive evaluation of word-of-mouth quality can we get a feasible solution. Then the knowledge recommended today is the brand recommendation and classification knowledge about ventilation skylights.

1. Which brand of ventilation skylight is good?

Shanghai A Paisnel Ventilation Equipment Co., Ltd. takes energy saving and emission reduction as its own responsibility and adheres to the concept of low-carbon life. The whole company relies on professional and dedicated scientific research and design personnel to continuously develop and produce efficient and energy-saving ventilation equipment. "Ampere" company is a modern enterprise with ISO900 1 certification. Have their own brand "Ampelair". Ampelair's products include large-scale natural ventilation equipment such as unpowered fans, ventilation skylights (aerial buildings), electric smoke exhaust skylights, and axial fans on power roofs; And air conditioning terminal ventilation products such as spherical nozzle, swirl tuyere, various air inlets, air outlets, air duct soft joints, etc. After decades of development, the company has set up distribution agencies in important areas of the country; At the same time, the products are also exported to all parts of the world. Therefore, ventilation skylight, roof ventilator and smoke exhaust skylight are the first choice, affordable and independent brands.

Second, the type of ventilation skylight

According to the materials used for skylights: metal skylights, wooden skylights, composite skylights and broken bridge aluminum skylights.

Zenith skylight-the direct transparent roof installation on the skylight illuminates the opening of the roof material. Zenith-skylight: if a light spot is set, the lighting cover (Figure1a); Block or strip-shaped covers, such as glass or glass fiber reinforced plastic flat glass, lighting manufacturing, and large-scale covers such as conical, arched, spherical glass roofs and glass roofs, can be converted into single-slope, double-slope or four-slope roofs, and point, block or strip skylights can also be used. Figure 1e is a political party composed of tapered glass roof skylight blocks. In order to support the roof skylight, the structure should be drained and beams should be set; There is rain on the roof, and there should be a drainage pipe in the room with skylight. The skylight with zenith effect is uniform and light, flexible in layout and simple in structure, but it should be pointed out that it can prevent glare, solar radiation, condensed water and glass from falling. If unsafe glass is used, the roof below is located in a metal protective net. In order to prevent glare, you can use a grid plate group composed of skylights. In order to prevent water droplets from condensing, openings for water and drainage tanks can be set here.

Convex skylight The practice is to put the load-bearing structure on the roof and on the side when putting forward a skylight and roof panel. * * * The same point is the rectangular skylight, rectangular, ventilated and daylighting ventilation window and skylight, which are used for daylighting of single-storey factory buildings and have certain ventilation. Rectangular ventilation skylight is rectangular, and the opening of the roof is blocked by baffle, so as to prevent the outdoor cold air from flowing, ensure that the skylight is not affected by the wind, and stabilize the heat treatment workshop with high ventilation requirements for discharge. The upcoming skylight lighting and ventilation, two rows of parallel skylights, make the functional distance between the two cross partitions, because, in these two forms of typhoon, ventilation, external wall window lighting, lighting and the use of internal openings for ventilation. The air-filled window is a skylight and louver with warm wind at the top of the mountain, which allows the hot air to be washed away directly; Side-mounted window frame, auxiliary breathing, enclosure cover in case of surrounding wind and rain. Dried tofu and indoor temperature fluctuate, and the temperature sensor drives the hydraulic device to adjust the ventilation from the angle of self-opening. Rainwater can pass through rain sensors and related facilities, with shutters closed and side windows open to maintain necessary ventilation. The inflatable skylight is light in weight, small in size, flexible, simpler and more efficient, and is suitable for heating and high temperature and strong radiation in cigarette shops.

The above is the first recommended brand of ventilated skylight with relatively more word-of-mouth advantages in the market. In addition, further analysis is based on various categories of ventilation skylights to further present plate information for everyone. From this, we know that in the specific purchase process, in order to ensure that the products can meet the specific application conditions and user needs, the first thing to do is to select suitable and reasonable styles with reference to the materials on the market, so as to gain advantages in the later operation.