How to install a vertical poster stand? How to install a roll-up banner

How to install wedding photo poster holder, wedding photo welcome poster picture. I believe many people feel very happy when taking wedding photos. The shooting process is not complicated. Most people will still go to the photo studio to take pictures. But in fact, if you have the equipment, you can take pictures directly at home. After taking wedding photos, some people don’t know much about how to assemble the wedding dress stand. For details, please refer to How to assemble the wedding photo poster stand, Wedding photo welcome poster pictures . The assembly method of the gauze poster holder is as follows: first turn the bottom of the poster holder 90 degrees and place it downwards, then directly peel off the sticky paper on the scroll guide of the poster holder, align the finished picture, and stick it flat After that, open the plastic cover at one end of the picture hanging strip, pull out the plastic core strip inside, and put it back into the metal tube to cover it. Finally, press the bottom, pull the painting strip with your hand, pull out the latch on the outside of the display rack, and put the photo away. Just put it in the rack. In fact, there are many things that many newlyweds don’t understand about their wedding. Most of them choose to use playful photos as their welcome photos when considering taking wedding photos, so as to make the scene full of lively atmosphere and also want the guests to feel To be happy. But be careful when choosing, you can choose slightly beautiful photos, do not make spoofs on wedding photos, and do not use black and white images. When placing welcome photos, you can place them directly in the entrance lobby of the hotel so that guests can see them at a glance. Choose photos that are mainly festive, then mark the names of the groom and bride, and then fill in blessings on the poster. Words, or briefly write a love story between two people, or something memorable. At the end of the wedding, you don’t need to throw away the welcome photos. You can store them as a souvenir, which is also a good memory. How to install the roll-up display stand 1. Place the reverse side of the inkjet print on the ground, and first paste the upper edge of the front side of the inkjet print. Align and stick the double-sided tape along the upper edge of the inkjet print.

2. Place the hard plastic core in the middle of double-sided tape and wrap it well.

3. Use transparent glue to wrap the hard plastic core with another layer. This can prevent the upper edge of the inkjet painting from failing and falling off during the lifting process.

4. Pick up the metal tube with your left hand and insert the wrapped hard plastic core along the square groove. Move slowly during the insertion process to avoid cutting your hands.

5. Tear off the middle section of the double-sided tape on the transparent paper protruding from the support.

6. Align the lower edge of the front face with the double-sided tape before tearing off the remaining paper on the double-sided tape.

7. Paste a layer of transparent glue on the connection to prevent the lower edge from falling off during the lifting process.

8. Find the hook latch, press the base bracket with your left hand and press the inkjet. Pull the hook latch out with your right hand, then press the inkjet with your right hand, pick up the base with your left hand and slowly put the inkjet into the base.

9. Unfold the base bracket, connect the three-fold metal tube and insert one end into the base hole.

10. After the inkjet printing is pulled up, one end of the slit is inserted into the bending groove of the metal pipe. After opening, the inkjet printing should be as smooth as possible. Complete the installation of the roll-up banner. How to install the roll-up banner Question 1: How to install the roll-up banner? Roll-up banners generally have a reel at the bottom with a spring inside, and the advertising screen can be rolled back into the reel when not in use. When you need to use it, pull out the cloth and use a three-section rod to support it at the back. Eagle Display Rack will give you a detailed explanation of the steps: A. Turn the "roll-up banner" feet to about 90 degrees and place it facing down. B. Peel off the sticky paper on the leading piece of the "roll-up banner" scroll, align and paste the finished picture, align the two ends, and make it flat. C. Open the plastic cover at one end of the picture hanging strip, pull out the hard plastic core strip in the middle, (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the picture), fold it and put it back into the metal tube. Cover with plastic lid. D. Press the bottom end, pull the picture-hanging strip with your hands, pull out the annular latch at the end of the "roll-up banner", and slowly put the picture into the "roll-up banner" (note: you must first pull the picture-hanging strip and the picture , then pull out the pin). E. When using, take out the three-fold metal rod placed on the "roll-up banner" and connect it. Insert one end of the metal rod into the triangular plastic opening of the "roll-up banner", then slowly pull out the picture, and put the hook of the hanging picture strip. Just hook it on the top of the metal connecting rod. F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps A to D. Question 2: How to install the roll-up screen? 1. Instructions for the production and installation of the roll-up banner. The "roll-up banner" is a good helper for you to quickly set up an exhibition or post and hang promotional pictures and text introductions. It is easy to carry with one pull and one hang.

A. Turn the base of the "roll-up banner" to about 90 degrees and place it facing down. B. Peel off the sticky paper on the leading piece of the "roll-up banner" picture scroll, align and paste the finished picture, align the two ends straight, and make it flat. C. Place the picture hanging strip (with a hook in the middle, Multi-purpose tubes with ITIS plastic covers at both ends) Open the plastic cover at one end, pull out the hard plastic core strip in the middle, (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the screen), fold it and then Put the metal tube back and cover it with the plastic cap. D. Press the bottom end, pull the picture-hanging strip with your hands, pull out the annular latch at the end of the "roll-up banner", and slowly put the picture into the "roll-up banner" (note: you must first pull the picture-hanging strip and the picture , then pull out the pin). E. When using, take out the three-fold metal rod placed on the "roll-up banner" and connect it. Insert one end of the metal rod into the triangular plastic opening of the "roll-up banner", then slowly pull out the picture, and put the hook of the hanging picture strip. Just hook it on the top of the metal connecting rod. F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps (1) to (4). 80cmx200cm roll-up screen size: 79x200cm (note: leave 1cm white margin at the top and 2cm at the bottom of the screen size) 2. Instructions for using the roll-up screen (see the schematic picture of the roll-up installation process for details) A. Take out the roll-up handle Take out the main support pole; B. Open the two brackets at the bottom of the roll-up banner and make it stand upright on the ground; C. Install the main support pole and the bottom bracket; D. Make the screen of the roll-up screen consistent with the main support pole. The support poles are connected well; E. Adjust the installation screen to make it smooth and beautiful. 2. Precautions for the use of roll-up banners A. Due to the temperature in various places, both sides of the screen are prone to slight curling. It is recommended that the screen be stored when it is not used for a long time. In addition, in response to the curling problem of the roll-up screen, Through many years of production experience, Naibao Company already has relatively mature products, and similar problems will not occur. B. Roll-up banners are promotional materials for indoor use and are not suitable for outdoor use. If it is indeed necessary for temporary publicity, it is best to choose a better quality roll-up base, and it is best to place the roll-up base on the roll-up base after opening it. Put something heavy on the back; make sure not to damage the product. Question 3: How to install the roll-up banner? Need it urgently! There is a tape inside the base. Use transparent glue to stick the picture on it and then pull it out slowly. Question 4: How to install the roll-up banner How to install the roll-up banner - Hangzhou Bangmeilai will tell you Before telling you how to install the roll-up banner, let us first understand the basic characteristics of the roll-up banner. The roll-up banner is composed of three major parts: the base, the back support rod and the picture, all of which are indispensable. The roll-up banner is made of aluminum alloy, so it is also called the aluminum alloy roll-up banner. The roll-up picture is produced by digital spray printing. Domestic digital inkjet printers are basically imported machines from abroad, such as Roland machines and HP machines. Digital inkjet printers have high production efficiency, advanced graphics processing technology, and bright colors. No matter how big the picture you need, the printed picture will be realistic and not distorted. The roll-up screen also uses spray painting. The cloth used by Hangzhou Bangmei Exhibition Equipment Co., Ltd. to produce the roll-up screen uses high-quality green environmentally friendly cloth and foreign digital machines. The screen specially processed by our Bangmei can play an anti-aging and waterproof role. , durable. No matter what kind of roll-up you are, their installation methods are similar, and you need to master three core steps: First, insert the back support rod. Second, pull out the screen. Third, hang the screen crossbar to the back support rod. OK, it's that simple and can be done in 3 seconds. This is the advantage of portable equipment. The roll-up banner produced by Hangzhou Bangmei has a double-sided roll-up banner that can hang two screens and has unique characteristics. When installing this special roll-up banner, you only need to repeat the second step. Roll-up banners are one of the most portable, simple and practical equipment among exhibition equipment. They are also cheap promotional equipment. One of their advantages is their low price. Although they are cheap, their functions are very extraordinary. The combination of well-made display stands and detailed roll-up graphics makes its display effect very outstanding. The affordable cost and high-quality display effect of roll-up banners are favored by corporate customers, making them an ideal choice for exhibitions and sales. The roll-up bag has a wide range of applications and can be used in almost any scene. It also has a special carrying bag. After use, it can be put away into the Oxford roll-up bag. It can be put on the shoulder or carried in the hand, just like a violin bag. As long as you need it, Hangzhou Bangmei will solve any exhibition equipment needs for you.

Reference source bemoredisplay/...id=384 Question 5: What are the precautions for installing and changing the screen of the roll-up banner? B. Open the two brackets at the bottom of the roll-up banner so that it stands upright on the ground; C. Connect the main support pole with The bottom bracket is installed; D. Pull the mesh screen to connect it with the main support pole; E. Adjust the installed screen to make it flat and beautiful. Special Notes: 1. Due to the temperature in various places, the two sides of the screen are prone to fine lines. Curling, it is recommended that the screen be folded and saved when it is not used for a long time; 2. Regarding the curling problem of the roll-up screen, after years of development and improvement, Macrosiron technology improvements have basically caused similar problems. Mainly improvements in materials and quality. Roll-up banners are promotional materials for indoor use and should not be used outdoors. If it is necessary for temporary publicity, it is best to choose a better-quality roll-up base, and it is best to press the roll-up base behind it after opening it. some heavy objects; make sure not to damage the product. Some companies often need to update their graphics. You can install it by yourself, which can save costs. Question 6: How to install the advertising roll-up door-shaped picture stand? The picture below shows the door-shaped display stand. Question 7: How to install the 10-minute roll-up after it is disassembled? There is a fixed hole at the base. After it is fixed, the screen can be changed. We design and install it for free. Searching for roll-up banners on Taobao includes design issue 8: Installation and use of roll-up banners. Roll-up banners generally have a roller at the bottom with a spring inside, and the advertising screen is rolled back into the roller when not in use. When you need to use it, pull out the cloth and support it with a stick behind it. When you need to use the roll-up banner, you can follow the following steps: A. Turn the "roll-up banner" feet to about 90 degrees and place it facing down. B. Peel off the sticky paper on the scroll guide of the "roll-up banner", align and paste the finished picture, and align both ends so that it is flat. C. Open the plastic cover at one end of the picture hanging strip, pull out the hard plastic core strip in the middle, (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the picture), fold it and put it back into the metal tube. Cover with plastic lid. D. Press the bottom end, pull the picture-hanging strip with your hands, pull out the annular latch at the end of the "roll-up banner", and slowly put the picture into the "roll-up banner" (note: you must first pull the picture-hanging strip and the picture , and then pull out the pin). E. When using it, take out the three-fold metal rod placed on the "roll-up banner" and connect it. Insert one end of the metal rod into the triangular plastic opening of the "roll-up banner", then slowly pull out the picture, and put the hook on the hanging picture strip. Just hook it on the top of the metal connecting rod. F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps A to D. 80cmx200cm roll-up screen size: 79x200cm (note: leave 1cm white margin at the top and 2cm at the bottom of the screen size). A. Take out the main support pole of the roll-up banner; B. Open the two brackets at the bottom of the roll-up banner so that it stands upright on the ground; C. Install the main support pole and the bottom bracket; D. Stretch the mesh screen to connect it with the main support pole; E. Adjust the installed screen to make it smooth and beautiful. Question 9: How to install the roll-up banner? Roll-up banners generally have a roller at the bottom with a spring inside, and the advertising screen can be rolled back into the roller when not in use. When you need to use it, pull out the cloth and support it with a stick behind it. When you need to use the roll-up banner, you can follow the following steps: A. Turn the "roll-up banner" feet to about 90 degrees and place it facing down. B. Peel off the sticky paper on the scroll guide of the "roll-up banner", align and paste the finished picture, and align both ends so that it is flat. C. Open the plastic cover at one end of the picture hanging strip, pull out the hard plastic core strip in the middle, (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the picture), fold it and put it back into the metal tube. Cover with plastic lid. D. Press the bottom end, pull the picture-hanging strip with your hands, pull out the annular latch at the end of the "roll-up banner", and slowly put the picture into the "roll-up banner" (note: you must first pull the picture-hanging strip and the picture , and then pull out the pin). E. When using it, take out the three-fold metal rod placed on the "roll-up banner" and connect it. Insert one end of the metal rod into the triangular plastic opening of the "roll-up banner", then slowly pull out the picture, and put the hook on the hanging picture strip. Just hook it on the top of the metal connecting rod. F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps A to D. 80cmx200cm roll-up screen size: 79x200cm (note: leave 1cm white margin at the top and 2cm at the bottom of the screen size).

Question 10: How to install and use the roll-up banner 1. Installation of the roll-up banner Generally, there is a roll at the bottom with a spring inside, and the advertising screen can be rolled back into the roll when not in use. When you need to use it, pull out the cloth and use a stick to support it behind. When you need to use the roll-up, you can follow these steps: A. Turn the base of the roll-up to about 90 degrees and place it facing down. B. Peel off the sticky paper on the roll-up scroll guide, align and paste the finished picture, align both ends, and make it flat. C. Open the plastic cover at one end of the hanging picture strip and pull it out. Place the hard plastic core strip in the middle (use a one-centimeter-wide double-sided tape to attach the hard plastic core strip to the upper edge of the back of the picture), fold it, put it back into the metal tube, and cover it with a plastic cover. D. Press the bottom end, pull the picture-hanging strip with your hands, pull out the annular latch at the end of the roll-up, and slowly put the picture into the roll-up (note: you must first hold the picture-hanging strip and the picture, and then pull out the pin ). E. When using, take out the three-fold metal rod placed on the roll-up banner and connect it. Insert one end of the metal rod into the triangular plastic opening of the roll-up banner. Then slowly pull out the picture, and hook the hook of the picture hanging strip on the metal connection. Just the top of the pole. F. If you need to change the screen, pull out the picture, insert the pin into the original fixing hole, fix the screen, and then repeat steps A to D. 80cmx200cm roll-up screen size: 79x200cm (note: leave 1cm white margin at the top and 2cm at the bottom of the screen size) 2. Use of the roll-up A. Take out the roll-up and take out the main pole; B. Put the roll-up Open the two brackets at the bottom of the treasure to make it stand upright on the ground; C. Install the main support pole and the bottom bracket; D. Pull the screen to connect it with the main support pole; E. Adjust the installation screen. To make it smooth and beautiful. 3. Precautions for the use of roll-up banners A. Due to the temperature in various places, both sides of the screen are prone to slight curling. It is recommended that the screen be stored when it is not used for a long time. In addition, in response to the curling problem of the roll-up screen, Similar problems no longer occur. B. Roll-up banners are promotional materials for indoor use and are not suitable for outdoor use. If it is indeed necessary for temporary publicity, it is best to choose a better quality roll-up base, and it is best to place the roll-up base on the roll-up base after opening it. Put something heavy on the back; make sure not to damage the product.

Look for corporate services on Zhubajie.com and deliver with guaranteed acceptance before payment