What should I pay attention to when installing central air conditioning in hotels?

First, the inner and outer walls are perforated.

Drill holes in the interior wall and confirm the location of holes in the room. If the inner beam of the hotel is as close as possible to the middle hole, it is usually on both sides of the steel bar and beam. When punching holes in the external wall, confirm the position of the hole and tilt to the external wall side to prevent rainwater from flowing backwards.

Second, the air conditioning installation lamp slot

Due to the logistics nature of air, the hot air flow keeps rising in winter. Therefore, it is very important to keep enough wind speed and adjust the shutter angle to ensure that the hot air reaches the height of human activity. Once the lamp trough is encountered, the airflow cannot flow downward, and the hot air always stays in the upper room, resulting in poor heat dissipation.

Third, pay attention to the installation of dust prevention inside the machine.

Protection of indoor unit or fan coil unit: The indoor unit or fan coil unit should be hoisted in time and protected with plastic bags, cardboard and other materials to prevent dust and foreign objects from entering the machine.

Fourth, the installation angle of air conditioner

During the installation of hotel central air conditioning, specialized technicians are required to be responsible for the installation, and the inclination angle of the unit should not exceed 45 during transportation. When installing, correctly debug the position of the unit to ensure its horizontal placement, and then install it in strict accordance with the installation instructions and design requirements. When installing the unit, it can be fixed on the cement base with expansion bolts, or it can be made of angle steel and added with shock-proof rubber to fix the unit on it. The whole installation process should accurately grasp the installation technical parameters to ensure its normal operation.