What do you mean by dry-wet separation between standards?

It means that the standard room has built-in dry and wet separation.

A standard room is a standard room, which is a standard room of a general hotel or hotel. Divided into standard double room and standard big bed room.

Dry-wet separation is a popular design concept in bathroom design. Using traditional bathroom equipment, water vapor is always everywhere after bathing, and humid air stays in the bathroom for a long time, resulting in dirty air. Dry-wet separation includes the separation of washstand and toilet; Or the shower area is separated from the toilet and basin. Dry refers to the sink, and wet refers to the bathroom.

Design points:

1. The bathroom cabinet is separated from the ground.

The lower edge of the bathroom cabinet should be off the ground, which will cause some difficulty in installation, but you'd better do so. Because there will inevitably be water in the bathroom, which may be formed by washing the floor with you, and accidental water leakage is not ruled out. If the bathroom cabinet is separated from the floor, you can not only keep the floor clean and leave no dead ends, but also worry that the bathroom cabinet will be damp, which can kill two birds with one stone.

2. The inside of the cabinet should be separated from the outside.

Waterproofing outside the cabinet is done, and moistureproofing inside the cabinet can't be ignored. The work of the bathroom cabinet must be fine and fit. There are many ways to design doors and drawers, such as installing magnets and other adsorption switches on the doors and using automatic return tension springs on the drawers to ensure that moisture can enter without holes.

Step 3 set up a "steam barrier"

Before installing shower curtain, waterproof and moisture-proof treatment is the key point of toilet construction. The condensed water at the top of the bathroom often corrodes the ceiling, making the ceiling and walls prematurely aging.

Before installing the suspended ceiling, a "steam barrier" should be laid to ensure that the rising steam will not condense on the cold floor and cause corrosion to the top. In addition, the waterproof effect of the bathroom is related to waterproof materials. The use of environmentally-friendly waterproof materials can prevent water seepage and create a bathing environment that does not smell wet.

4. Anti-skid and moisture-proof in dry areas

The so-called dry-wet separation is only relative, so dry areas must also pay attention to moisture-proof and anti-skid treatment.