How to set the hotel inductive door lock correctly

Abstract: Hotel inductive door lock is a common electronic lock, which is widely used in hotels, hotels, clubs and other occasions. The installation method of hotel induction door lock is very simple. First, check whether the relevant equipment is in good condition, and then install the lock body according to the size requirements. After the lock body is checked, set the door lock. When setting the hotel door lock, first insert the card issuing machine into the USB port of the computer, and then add the mother card and daughter card step by step. Let's take a look at Bian Xiao. What are the installation steps of the hotel induction door lock?

1. Prepare the hotel inductive door lock and related accessories, ensure that the mechanical key can unlock, and check whether the circuit part is damaged. If there is any fault, take out the lock body for adjustment, or contact the manufacturer for replacement until the lock is confirmed to be in good condition.

2. According to the installation dimension diagram of the lock body, drill the lock body installation hole on the hotel door.

3. Install the lock body into the hole position in turn, align the rear fixing screws, install the screws and connecting screws on the outer plate, insert the interlocking square bar into the square bar hole of the lock body, align the square bar hole of the outer plate with the interlocking square bar hole, and install the outer plate.

4. Install the inner panel parts, align the rear fastening screws, insert the lock body into the lock hole of the lock body from the inside out, insert the screws from the lock body panel hole and align the threads of the lock body mounting hole, then fasten, and then install the lock box or lock plate on the door frame.

5. After initial installation, rotate the outer handle and the inner handle to observe whether the oblique tongue can retract and extend smoothly. Turn the knob on the back panel and feel whether the square tongue retracts smoothly. Insert the key, rotate it back and forth, and feel whether the square tongue stretches smoothly. If not, it should be adjusted in time.

6. Tighten the assembly screws and reinforce the door lock. Then check it again and try it several times. If the movement is not smooth, loosen the screw, adjust the position, and then try again until it is suitable.

7. Set the induction door lock and write the room card information. Note, be sure to distinguish between the mother card and the daughter card. After the room card information is written, check whether the function of the room card is perfect. If not, it should be reset.

How to set the hotel inductive door lock correctly

1, prepare a computer.

The computer needs to install Windows operating system, which can be XP, VISTA, WIN7 or WINDOWS2000. The screen resolution should be at least 1024x768.

2. Install the card issuer

Insert the card issuer into the USB port of the computer, and the green light will be on after the card issuer gives a beep, indicating that the installation is successful.

Step 3 clear the door lock

Twist it five times in a row with a mechanical key. Every time you twist it, the door lock will beep, and after five times, the door lock will beep for a long time. The original "mother card" and "daughter card" will all be deleted, and the door lock will be empty.

4. Add "mother card"

When the door lock is empty, the first card to be swiped is the "mother card", and the door lock makes a short and long sound indicating that the mother card is successfully configured.

5. Add "daughter card"

Brush the "mother card", the door lock clicks, the blue light flashes when opening the door, and brush other EM cards. The door lock clicks short, indicating that the card has been added, the blue light flashes again, and so on, until the "mother card" is swiped again or the card is not swiped for 5 seconds.

If you use the lock of the card issuing machine, you can set it directly through the computer connected to the card issuing machine. You only need to set which room to open when issuing the card. The use of the card issuing machine is very simple. Generally speaking, the manufacturer who uses the card issuing machine will provide a CD with instructions on issuing the card.