How big is the bathroom shower room? How much is the bathroom shower room per square meter?

Bathroom decoration is the focus of house decoration. With the improvement of the quality of life, many people like to install a shower room in the bathroom to achieve the effect of dry and wet separation. So how big is the bathroom shower room? How much is the bathroom and shower room per square meter? What is the floor practice of bathroom shower room? What is the practice of bathroom shower room wall? Let's take a look together.

How big is the bathroom shower room?

1, shower room width

The width should ensure that we can turn around freely when taking a shower, and we can't always touch the glass. Usually 900mm900mm is appropriate. If you are fat at home, you can also make it 1000mm 1000mm, but try not to be less than 800 mm 800 mm

2. Height of shower room

Generally, the height of shower room is about 1800-2000mm, and the standard height is about 1.95 m, which should be adjusted according to the height of family members and the actual space. You also need to pay attention to the location of the shower. If the water is too low, it will splash outside, and if it is too high, it will affect the appearance.

How much is a bathroom and shower room per square meter?

1, consider different layouts.

If the bathroom area is relatively large, then we can improve the internal design, from the overall layout to the local layout, we can have more detailed planning, including the location of shelves and the installation of Yuba. Generally, the price of shower room in the whole bathroom is around 100 yuan/square meter.

Step 2 consider different materials

Different materials have different prices. For example, embossed glass sliding door is a very popular single product, with good visual effect, good embossing treatment and better visual experience. Its price is about 100- 150 yuan/square meter.

3. Consider different renderings.

A good layout of bathroom shower room should not only pay attention to the square meters of bathroom space, but also make every space better used. The price of bathroom shower room under this brand is about 100 yuan/square meter. (The price is for reference only, subject to the actual situation. )

Bathroom shower room floor exercise

1. Stick the floor drain back into the zigzag shape, with the middle lower than the periphery and recessed, so that the accumulated water can be drained. The floor drain is designed at the corner, which is easy to find slope and drain.

2. The location of the floor drain. If the sewer pipe in the bathroom is not against the wall, it is necessary to move the sewer pipe of the floor drain to the position against the wall when doing water and electricity.

3. When the bathroom is used as a shower room, it should be cut off to prevent the direction of water flow and avoid water splashing as much as possible. Use waterproof strips, and the effect is very good.

4. The distance from the ground to the floor drain must have a drainage slope. Take the floor drain as the center to find the slope, scrape it with a ruler, and the plastering shall be smooth, and the surface shall be free of pits, cracks, sand and water.

5, you can also use the principle of drainage, use a cutting machine to cut a thin seam on the tile, don't be too deep, as long as the water can flow away, so as to ensure that the bathroom will not accumulate water.

Practice of bathroom shower room wall

The practice of bathroom shower room wall is mainly waterproof. Generally, the height of waterproof layer should reach more than 25cm. The waterproof layer in the shower area should be 180cm. For waterproofing, basic treatment is the key, otherwise even the best materials are useless. The base should be flat and dense, and the moisture content should not be too high. Adding an additional layer to a node means adding a layer locally. In fact, it is very useful to find the slope of the floor tile and mark it well.

1, waterproof height of bathroom wall

The waterproof height of the bathroom wall should reach 1.8 meters, and the waterproof layer extends from the ground to the wall, 250MM higher than the ground. The height of the waterproof layer on the bathroom wall near the shower nozzle is not less than 1800MM, and the general thickness is not less than1.5 mm. After the waterproof project, the water storage experiment must be carried out for 24 hours.

2, bathroom wall waterproof practice

The bathroom area is generally small, and the pipes pass through the floor, so coating is generally used for waterproofing, and coiled materials are rarely used for waterproofing. Waterproof coatings include polyurethane waterproof coatings and SBS waterproof coatings, and asphalt-based waterproof coatings are basically not used.