Dismantling steps and precautions of shower nozzle

Whether at home or in a hotel, there may not be a bathtub, but there must be a shower head. Shower is the most commonly used product in our daily life, and it is exactly what we use every day. The frequency is high, so its damage rate is also high. So we should master the skills of repairing it, and the first step of repairing the shower is disassembly. Below we will introduce different kinds of nozzle disassembly methods respectively.

? Dismantling steps and precautions of shower nozzle

sprinkler head

If it is an old sprinkler, the previous water discharge is normal, which may be caused by scale blockage. Don't dismantle the nozzle in a hurry at this time. Rubbing the silica gel next to the nozzle water hole by hand can remove scale, or white vinegar solution can be used. The ratio of white vinegar to water is 1: 3. Soak the water outlet part of the shower nozzle for a period of time. Don't soak it all, it will corrode the electroplating. In short, don't disassemble the nozzle until it can be disassembled.

Generally speaking, it is not recommended to remove the nozzles by force, because some nozzles cannot be recovered after removal. If the shower is new and the water output is small, check the thread connecting the handle and the hose to see if there is a water-saving filter plug in the thread. If there is, take it out with needle-nosed pliers to increase the water output.

The structure of the shower is nothing more than a water outlet cover and a handle. If it is a sprinkler with adjustable water outlet, there should be a software ring in the middle. Hold it tightly and turn it counterclockwise (or clockwise). It should be able to turn. If it is a shower that can't adjust the amount of water, it can't be disassembled basically, because most of them are welded tightly with plastic.

Other nozzles

Yes, there is a cruciform screw at the shower head. You can unscrew it with a Phillips screwdriver to clean it. If the nozzle is blocked, fine wire can be used to remove the stone chips from the eyes. Understand the structure of shower head first, and then prepare some common tools. If it rusts, soak it in vinegar with some loosing agent or lubricant. Generally speaking, cleaning does not need to remove the shower head, just remove the water stains on the surface. There is basically no blockage inside. If you really want to dismantle it, the joint between the shower head and the water pipe can be unscrewed directly, and there are special descaling things. Just put the shower head or something in diluted water! Remove the shower head from the hose, and then pour some vinegar into the washbasin. Because shower heads generally produce scale. And vinegar is acidic! You can't pry it open with a screwdriver There should be teeth around the nozzle outlet. You can clamp it with a pipe wrench, rotate it counterclockwise and remove it. If you don't have a pipe wrench, you can also find a piece of wood, make a square mouth with a saw and make a fixture yourself.

Remove the shower nozzle correctly.

Observe the types of shower heads: there are too many types and styles of shower heads, but most of them are similar in principle. The method of disassembling the shower depends on the specific structure of the shower. Most of them can be disassembled counterclockwise by hand without using tools.

Observe the structure of the shower: the structure of the shower is nothing more than the water outlet cover and handle. If it is a sprinkler with adjustable water outlet, there should be a software ring in the middle. Hold it tightly and turn it counterclockwise or clockwise. It should be able to turn. If it is a shower nozzle that cannot adjust the water volume, it cannot be disassembled, because most of it is welded with plastic.

With tools: if there is a small round cover in the center of the shower head, pry it open with a screwdriver and you will see the screws. See what the screw is, and you can remove the shower head with the corresponding screwdriver. Generally speaking, as long as it is not a disposable shower head, it can be disassembled. Considering its structure, it should not be too difficult to disassemble the shower.

Precautions for disassembly

In order to avoid frequent disassembly and cleaning, when choosing shower heads, you must choose those suitable screen washers, that is, the mesh should not be too large or too thin. Too large may have no filtering effect, and too small may affect the flow. The size of the screen should be 40-60 mesh.

Well, about the disassembly of the shower nozzle, these skills and processes are probably these. You can take a good look at the shower nozzle at home and disassemble it according to different styles. It's easy to find skills. Attention should be paid to closing the sluice when repairing, or tap water will gush out after opening the sprinkler, which not only makes us a drowned rat, but also wastes water.

The above is related to the disassembly of shower nozzle, I hope it will help everyone! ?

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~