Traditional Culture Encyclopedia - Hotel accommodation - Classic rational suggestions for energy saving and consumption reduction
Classic rational suggestions for energy saving and consumption reduction
Pursue green fashion and embrace green life. Below are the rational suggestions for energy saving and consumption reduction that I have put together for you. I hope it can help you! Classic rationalization suggestions for energy saving and consumption reduction Part 1
1. Maintenance:
1. The old should be repaired and the new used. Valuable spare parts should not be discarded due to local damage and should be repaired. ;
2. Save materials and prepare actual materials for maintenance to reduce unnecessary waste;
3. Sufficiently equip maintenance personnel, cultivate a quality team, and shorten maintenance time and quality, increase efficiency;
4. Ensure that the integrity rate of mechanical and electrical equipment reaches more than 95%;
2. Operation:
1. Educate employees strictly Execute in accordance with the operating procedures to ensure safety and ensure the normal operation of the equipment;
2. Determine personnel and positions to strengthen operational responsibility and avoid operational errors, which may increase production costs in disguise;
3. Establish Ownership mentality, frequent inspection of equipment, and shift handover should be taken seriously;
4. Effectively utilize resources to prevent the system from running empty, reduce equipment wear and tear, and improve the awareness of power conservation in the entire plant;
5. Offices and other locations that do not require constant lighting need to be effectively managed to avoid wasting electricity;
3. Management:
1. Dig deep into potential, raise awareness, and strengthen basic management. The measurement work is in place;
2. Add secondary measurement and carry out reasonable and evidence-based management;
3. Strict assessment, with clear rewards and punishments;
4. Beforehand Management, make good plans and arrangements, do a good job in plan implementation, and strengthen indicator supervision.
4. Standardize materials and warehousing management:
1. Effectively prepare and report the material use plan, and strictly follow the approval procedures for the material use plan. The monthly material usage plan of each workshop is strictly reviewed by the factory audit team, and will be purchased by the supply department after being signed by the factory director. The material use plan is combined with the actual situation on site, and based on the principle of economy and sufficient use, to ensure the normal operation of production;
2. Strengthen warehousing management, establish and improve account books, and all items must be consistent with the accounts, cards, and materials. , resolutely ban the backlog of items in small warehouses in workshops, and at the same time do a good job in maintaining equipment and items;
1. Control every expenditure. All departments should better control costs reasonably;
2. Make good use of every employee. Reasonable division of labor, improve work efficiency and enthusiasm, improve responsibility and work accuracy, and reduce work errors;
3. Do a good job at each merchant. Communicate more with merchants, actively solve practical problems for merchants, provide warm and thoughtful services, and report issues raised by merchants to relevant leaders as soon as possible and make handling opinions within 24 hours;
4. Reduce a gap. Timely and effective communication between departments and between people should be carried out to eliminate work obstacles, think more empathetically, support each other more, and create a harmonious and harmonious working atmosphere.
5. Save every kilowatt hour of electricity. 1. Lighting, insist on turning off the lights at will, put an end to "daylights" and "constant lights", and use energy-saving lighting fixtures; 2. Air conditioning, set the indoor temperature reasonably, and the air conditioning temperature should not be lower than 26°C in summer and not higher than 20°C in winter. , do not turn on the air conditioner when no one is around, close the doors and windows when turning on the air conditioner, and it is recommended to turn on the air conditioner for one hour less every day; 3. Office equipment, computers, printers, copiers and other office automation equipment should avoid long-term standby to reduce standby consumption and close the room before leaving get off work. All power switches;
6. Save every drop of water. Avoid large boiling faucets and long running water, develop the habit of turning off the faucets, and turn off the faucets when squeezing out hand soap or washing detergent;
7. Save every piece of paper. Promote paperless office, reduce the frequency of issuance of paper documents and use of faxes, promote the use of double-sided paper, and promote the reuse of waste paper. Waste paper after printing and copying in each department should be proactively recycled to avoid leaking company secrets; p>
8. Save every liter of oil.
1. Strengthen daily vehicle management and reasonably arrange vehicle tasks. The vehicle department must apply to the office in advance for comprehensive deployment; 2. Maintain vehicles in a timely manner to reduce the occurrence of vehicle failures; 3. Promote the use of bus cards, except in emergencies. Or if goods need to be transported, the company can send a car. Department employees should try to use bus commuter cards to travel by public transportation when going out. Unless there are special circumstances, it is prohibited to use bus commuter cards to take taxis or shop;
9. Save every cent of office expenses. Choose reasonable office supplies manufacturers, purchase high-quality and low-price office supplies, and reduce the cost of purchasing office supplies;
10. Repair every piece of waste that can be used. For faulty equipment, try to repair the old equipment and reuse it to tap its potential and increase efficiency so that it can be reused. Classic rationalization suggestions for energy conservation and consumption reduction Part 2
Promote control of every expenditure. All departments reasonably control costs, and expenses are reduced by 5%-8% compared with 2009;
Promote the best use of every employee. Reasonable division of labor, improve work efficiency and enthusiasm, improve responsibility and accuracy, and reduce work errors;
Advocate the adoption of every good strategy. Strengthen management, reform and innovate, reasonably improve working methods and processes, advocate small inventions and small creations, and improve labor productivity;
Advocate to do a good job of every customer. Communicate more with customers, actively solve practical problems for customers, provide warm and thoughtful services, and report issues raised by customers to relevant leaders as soon as possible and make handling opinions within 24 hours;
Promote reducing the gap. There should be timely and effective communication between departments and between people, eliminate work obstacles, think more empathically, support each other more, and create a harmonious and harmonious working atmosphere;
Promote the saving of every kilowatt hour of electricity :
1. Lighting, insist on turning off the lights at will, eliminate "daylights" and "constant lights", and use energy-saving lighting fixtures;
2. Air conditioning, set the indoor temperature reasonably, in summer The air conditioning temperature should not be lower than 26°C, and not higher than 20°C in winter. Do not turn on the air conditioner when no one is around. Close the doors and windows when turning on the air conditioner. It is recommended to turn on the air conditioner for one hour less every day;
3. Office equipment, Computers, printers, copiers and other office automation equipment should avoid long-term standby to reduce standby consumption, and turn off all power switches in the room before leaving get off work;
Promote saving every drop of water: avoid large boiling faucets and long running water. Develop the habit of turning off the faucet easily, and turn off the faucet when squeezing out hand sanitizer or dishwasher detergent;
Promote saving of every piece of paper: promote paperless office, reduce the use of paper documents and the use of faxes frequency, promote the use of double-sided paper, and promote the reuse of waste paper. Waste paper after printing and copying in each department should be actively recycled to avoid leaking company secrets;
Promote the saving of every liter of oil: 1. Strengthen Daily vehicle management, reasonable arrangement of vehicle tasks, the vehicle department must apply to the office in advance for comprehensive deployment;
2. Carry out timely maintenance of vehicles to reduce the occurrence of vehicle failures;
3. It is recommended to use bus cards. Unless there is an emergency or when goods need to be transported, the company can send a bus. Department employees should try to use bus commuter cards to travel by public transportation. Unless there are special circumstances, it is prohibited to use bus commuter cards to take taxis or shop;
Promote the saving of every cent of office expenses: choose reasonable office supplies manufacturers, purchase high-quality and low-price office supplies, and reduce the cost of purchasing office supplies;
Promote the repair of every scrap that can be used. For faulty equipment, try to repair old ones and reuse them, tap potential and increase efficiency, and insist on reusing things that can be reused. Classical rationalization suggestions for energy saving and consumption reduction Part 3
One of the ways to save energy and reduce consumption: use insulation materials
36% of the world’s energy consumption is for heating and cooling homes. Insulation can actually save a lot of energy, as the "Zero Energy House" model homes in Switzerland and Germany show. From polyurethane "exterior insulation systems" coated on the outside of buildings to airtight "superglass" windows, many methods of insulation have been invented. Advanced insulation measures follow the economic law of return: if you adopt adequate insulation measures, you can reduce or eliminate heating and air conditioning equipment, thereby saving energy, reducing consumption and reducing costs. Research shows that environmentally friendly work environments (work environments that do not require frequent heating or air conditioning) can increase worker productivity and reduce employee illness rates.
Energy Saving and Consumption Reduction Part Two: Replace Light Bulbs
20% of the world’s electricity is consumed in lighting, or the energy consumed by lighting is equivalent to burning about 600,000 tons of coal every day. 40% of the electricity is consumed by old-fashioned incandescent light bulbs. Producing the same amount of light, energy-saving fluorescent lamps consume 70% to 80% less electricity than incandescent lamps, and their service life is 10 times longer than that of the latter. Phasing out incandescent lamps by 2030 can save the power generation of 650 power plants and reduce the amount of carbon dioxide emitted into the atmosphere by 700 million tons every year.
Energy saving and consumption reduction No. 3: Improving household heat exchangers
Heat exchangers such as water heaters, heaters, and air conditioners are the least energy efficient, and only part of the energy is actually used to change the temperature. Most new homes in Sweden have switched to geothermal heat pumps for heating; George Bush’s ranch in Crawford, Texas, was also heated and cooled with geothermal heat pumps. These systems consume much less conventional energy (these systems utilize LNG in a closed cycle for heat exchange and require only a small current to keep the compressor running). Some countries have adopted subsidies to start the market. For example, Japan has installed 1 million geothermal pumps in the past two years to heat bath water and radiators. Energy Saving and Consumption Reduction Part 4: Improve Factory Energy Consumption Equipment From steel plants and aluminum smelters to pulp and paper mills, the world's industrial sector accounts for about one-third of the energy consumed. The potential for energy savings in the industrial sector is huge. Since the 1980s, steel companies such as Japan's Mitsubishi Heavy Industries have been leading the way in using waste heat from steel-making furnaces to generate electricity, saving more than 70% of energy.
Energy Saving and Consumption Reduction Part 5: Driving an Environmentally Friendly and Energy-Saving Car
One-quarter of the world’s energy—including 2/3 of the oil produced every year—is used for transportation. Some energy-saving measures cost nothing. For example, keeping your tires properly inflated can improve energy efficiency by 6%. Gas-electric hybrid vehicles can further increase mileage by 20%. Modern direct-injection turbocharged diesel engines such as the Volkswagen Passat TDI, as well as diesel-electric hybrid engines being developed by France's Peugeot and Germany's Daimler-Chrysler, can achieve very good energy-saving effects. Energy Saving and Consumption Reduction Part 6: Promote the Energy Saving Effect of Refrigerators More than half of residential electricity consumption is used for household appliances, and one-fifth of the world's carbon dioxide emissions are caused by residential electricity consumption. Since the 1980s, manufacturers have improved the energy efficiency of household appliances such as refrigerators by 70%, but there is still room for further improvement in this area.
Energy Saving and Consumption Reduction Part 7: Trying to Solve Energy Saving Investment Costs
Who says you have to pay for all energy saving and consumption reduction investments? Energy service companies can pay for the required equipment modification costs, and then This is deducted from the customer's savings each year. For example: Beijing Shenwu Thermal Energy Technology Co., Ltd. specializes in energy-saving combustion equipment renovation projects for industrial furnaces. Shenwu Company invested in installing a heat exchanger for a steelmaking plant to preheat the air entering the steelmaking furnace, which greatly reduced the customer's fuel costs. Shenwu takes a share of customers' savings, making both Shenwu and the steel mill profitable.
Energy saving and consumption reduction starts with me, and cost control will continue
Energy saving, consumption reduction, pollution reduction, efficiency improvement, protecting the environment are beneficial to the country and the people
Energy saving and consumption reduction is for everyone. Responsible
Reduce waste, reduce losses and improve quality, save energy, reduce consumption and increase efficiency
Reduce costs bit by bit and increase benefits every second.
- Previous article:Which community does the seaside primary school behind Yuda in Wuchuan belong to?
- Next article:Handling personal leave reasons
- Related articles
- Beidaihe travel guide Beidaihe travel guide
- How much cheaper is Shenzhen Shiyanzi Yueyue Center in January?
- Kneel down! What is the most convenient way to get from Longhua Dalang Taoyuan Hotel Station to the 5th-8th floors of Bao Zhong Building (Bao Zhong International Hotel) at No.21East Ring Road?
- How to get from Wuhan Railway Station to Wuhan New Adanyuan Optical Valley International Hotel?
- Why did the train from Shenmu to Xi 'an stop these two days? ! Kneel for answers!
- How many kilometers is it from Yuyao North Station to Hao Yue Hotel on Shengshan West Road?
- Want to know: How to take the bus from Langri Hotel to Zhongshan Bus Terminal in Zhongshan City?
- What's the surrounding environment like in sunny Rhine town? Is life convenient?
- How many kilometers is it from Sanya Airport to Sanya Bay Eighteen-degree Lan Seascape Holiday Apartment?
- Is there a beach in Yingkou Guchuantan Resort Hotel?