Simple pontoon bridge construction method

The simple pontoon bridge construction method is as follows:

1. Determine the installation location.

First of all, we must determine the position of the pontoon bridge, and choose a place with slow water flow and flat shore to facilitate construction and use.

2, laying boards

Planks should be laid in parallel between the two banks, and the spacing between planks should be moderate to ensure the stable passage of people and materials. You can fix the board in the water with a rope to prevent it from drifting.

3, fixed stakes

Pile in the water on both sides of the river, and the length of wood should be long enough to ensure the stability of the pontoon bridge. You can use a hammer or other tools to drive the stake into the bottom of the river to ensure that the stake is vertical to the horizontal plane.

Step 4 connect wooden boards and stakes

Use ropes to connect wooden boards and stakes to increase the stability of the pontoon bridge. The rope can be tied to the board around the stake, or it can be drilled and fixed on the board and stake, and then the rope can pass through the hole.

5. Install buoyancy devices

Plastic buckets or other buoyant objects are fixed at both ends of the buoy to increase the bearing capacity and stability of the buoy. Wooden barrels can be firmly tied to boards and stakes with ropes.

6. Inspection and testing

After the pontoon bridge is completed, it needs to be inspected and tested to ensure that the pontoon bridge structure is firm and stable. You can have it tested to check the safety and reliability of the pontoon bridge.

Matters needing attention in building pontoon bridge:

In the process of building and using the pontoon bridge, we need to pay attention to the following points:

1, safety first

When building a pontoon bridge, it is necessary to ensure the safety of construction personnel and avoid accidents. When using the pontoon bridge, pay attention to smooth traffic and avoid shaking and jumping.

2, regular inspection

The pontoon bridge needs to be inspected regularly to ensure that the materials such as boards, stakes and ropes are intact, and the damaged parts should be repaired or replaced in time.

3. Prevent drift

When the water flow is large or the water level changes greatly, measures should be taken to prevent the floating bridge from drifting, such as increasing fixed points and strengthening the firmness of fixed ropes.

4. Limit the carrying capacity

The bearing capacity of pontoon bridge is limited, so it is necessary to limit the bearing capacity of personnel and materials according to the actual situation to avoid the collapse of pontoon bridge due to overload.