How to remove the stuck things in the cosmetic mirror of the public sunshade?

Use a flat-head screwdriver to pass the hook through the hole in the front of the tray. When pushing the hook with a flat screwdriver, release the sun visor from the bracket and rotate the sun visor backward by 45 degrees to remove the sun visor. The removed sunshade should be placed in a soft place to avoid staining or scratching the surface of the sunshade.

Introduction to the removal of sunshade buckle

Volkswagen has a small cover on the sun visor fixing clip. When the cover is removed, the screws can be seen. When the screw is unscrewed, the visor buckle can be removed. Automobile sun visor plays an important role in the driving process of vehicles. It can not only provide clear sight for drivers in time, but also effectively improve driving safety.

The automobile sun visor is a board installed above the driver to prevent dazzling sunlight. You can turn it down when you use it and turn it on when you don't use it. It is made of plastic, EPP, PU foam, cardboard and so on. It can be divided into three types: front gear, side gear and rear gear.

Front sunshade: there are not many kinds, generally there are two kinds of aluminum foil and non-woven fabric. Aluminum foil is generally divided into plain surface and pattern, and its size is generally 60× 130cm, which is suitable for most small cars. When the weather is hot, you can put the aluminum foil outward to ensure the reflection of sunlight. It is best to choose a parasol with a sucker, and don't buy a smooth or too cheap front parasol.

The rear sun visor is usually for passengers. The rear sunshade of some high-end cars is the original factory configuration, which is telescopic and generally black mesh. This kind of sunshade is effective, beautiful and convenient, and it is the best rear sunshade. There is only one original car without a rear sunshade.