How many kilometers is it from Anyang to Shandong?

Question 1: How many kilometers is it from Anyang to Jinan? Driving route: the whole journey is about 32 1. 1 km.

Starting point: Anyang city

1. Anyang driving plan

1) Start from the starting point to the west, drive along Wenfeng Avenue for 60 meters, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue for 2.0km and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 190 meters and go straight into S30 1.

5) Drive along S30 1 for 80 meters, turn right and get on the ramp.

2. Drive along the ramp for 980 meters, turn right ahead and enter the Beijing-Hong Kong-Macao Expressway.

3. Drive along the Beijing-Hong Kong-Macao Expressway for 68.3km, then turn right slightly and go up the ramp to Jinan/Changzhi /G22/ Shijiazhuang.

4. Drive along the ramp for 2.8km and go straight into Qinglan Expressway.

5. Drive along Qinglan Expressway 15.0km, cross Qinglan overpass, turn right slightly and enter Qinglan Expressway.

6. Drive along Qinglan Expressway, cross the Qinglan overpass bridge for about 1.9 km, and go straight into Qinglan Expressway.

7. Drive along Qinglan Expressway for 59.6 kilometers, cross the Jiliaoguan Expressway overpass bridge for about 1.3 kilometers, and go straight into Jiliaoguan Expressway.

8. Drive along the Jilin-Liaoning Expressway 140.6km, and go straight into the ring expressway.

9. Drive along the expressway around the city120m, face Jinan/Dezhou, turn right slightly and enter Yancheng Hub Interchange.

10. Jinan driving plan

1) Drive along Yancheng Hub Interchange for 660 meters, cross Yancheng Hub Interchange for about 520 meters, and go straight into Jingtai Expressway.

2) Drive along Beijing-Taiwan Expressway for 6.8km, cross the Yellow River Bridge of Beijing-Taiwan Expressway, turn slightly right in the direction of Jinan North/Tianqiao, and enter Jinan Huaiyin Hub Interchange.

3) Drive along Jinan Huaiyin Hub Interchange for 660m, cross Jinan Huaiyin Hub Interchange for about 290m, and go straight into Jiguang Expressway.

4) Drive along Jiguang Expressway for 4.8km, turn right slightly in the direction of the Second Ring Road Beifu/Second Ring Road West/Provincial Culture and Art Center, and enter Jinan Tianqiao Interchange.

5) Drive 500 meters along Jinan Tianqiao Interchange, cross Jinan Tianqiao Interchange about 1. 1 km, and go straight into the Second Ring West Elevated Road.

6) Drive 3. 1km along the West Elevated Road of the Second Ring Road, drive in the direction of Beiyuan Elevated Road/Jinan West Railway Station, and turn right slightly to enter the Mine Interchange.

7) Drive along the mine interchange 1.2km, and go straight into Beiyuan Elevated Road.

8) Drive along Beiyuan Elevated Road for 3.5km, cross Shundu Building on the right, exit at Keelung Road/Weier Road, and turn right slightly on the ramp.

9) Drive along the ramp for 430m and go straight into Wuyingshan Middle Road.

10) Drive along Wuyingshan Middle Road for 480m and enter Jilong Road.

1 1) Drive along Keelung Road for 750 meters and go straight into Tiancheng Road.

12) Drive along Tiancheng Road 1.0km, and go straight into Weier Road.

13) Drive along Weft 2 Road for 4 10 meters, turn right and enter Jinger Road.

14) Drive along Jinger Road for 90 meters and reach the destination (on the right side of the road).

End point: Jinan city

Question 2: How many kilometers is the driving route from Anyang to Penglai, Shandong? The whole journey is about 724.438+0 km.

Starting point: Anyang city

1. Anyang driving plan

1) Start from the starting point to the east, follow Wenfeng Avenue 1.9 km and turn left into Wenfeng Avenue.

2) Drive along Wenfeng Avenue for 20 meters and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 170 meters and go straight into S30 1.

5) Drive along S30 1 for 90 meters, turn right and get on the ramp.

6) Drive 300 meters along the ramp, turn left slightly in the direction of Handan/Beijing, and get on the ramp.

7) Drive along the ramp for 680 meters and enter the Beijing-Hong Kong-Macao Expressway at the entrance.

2. Drive along Beijing-Hong Kong-Macao Expressway 13.4km, and go straight into Shi 'an Expressway.

3. Drive along Shi 'an Expressway for 55.8km, and turn right slightly in the direction of Jinan/Changzhi /G22 to get on the ramp.

4. Drive 580m along the ramp to Guantao/Jinan /G22, turn right slightly and get on the ramp.

5. Drive along the ramp 1.3km, and enter Qinglan Expressway at the entrance.

6. Drive 77.4 kilometers along Qinglan Expressway and go straight into Jiguan Expressway.

7. Drive along Jiguan Expressway for 230 meters and go straight into Jiliao Expressway.

8. Drive along Ji-Liao Expressway 1 1.6 km, turn right slightly and enter guanxian Interchange.

9. Drive along guanxian Interchange for 940 meters and go straight into Jilin-Liaoning Expressway.

10. Drive along Jiliao Expressway 15.9 km, turn left slightly and enter Jiguan Expressway.

1 1. Drive along Jiguan Expressway for 960m and go straight into Jiliao Expressway.

12. Drive along Jilin-Liaoning Expressway 18.0km, turn left slightly and enter Jiguan Expressway.

13. Drive along Jiguan Expressway for 93.0km, and go straight into the ring expressway.

14. Drive along the expressway around the city for 80 meters and go straight into Yancheng Hub Interchange 15. Drive 660 meters along the Yancheng Hub Interchange and go straight into the Ring Expressway.

16. Drive along the expressway around the city for 3.7 kilometers, turn left slightly and enter Jiaobin Interchange.

17. Drive along Jiaobin Li Jiao for 840m, and go straight into expressway around the city.

18. Drive along the expressway around the city for 9.3km, turn right slightly in the direction of Qingdao/Zibo, and enter the Biaoshi intersection.

19. Drive along Biaozi intersection 1.5km, and go straight into the ring expressway.

20. Drive 3.8km along the ring road of expressway and go straight into Jinjia Li Jiao.

2 1. Drive along Jinjia Li Jiao for 660m and go straight into expressway, which is around the city.

22. Drive along the expressway around the city for 9.0km and go straight into Cuizhai Interchange.

23. Drive along the Cuizhai Interchange for 650 meters and go straight into the Ring Expressway.

24. Drive along the Ring Expressway for 5.9 kilometers, turn right slightly and enter Lianhua Interchange.

25. Drive 820 meters along the Lotus Interchange and go straight into the Ring Expressway.

26. Drive along the expressway around the city 1.3km, and go straight into the airport intersection.

27. Drive along the airport hub interchange for 30 meters, turn right slightly in the direction of Qingdao/Zibo/International Airport, and enter the airport hub interchange.

28. Drive along the airport interchange for 830m and enter expressway, Yin Qing at the entrance.

29. Drive along Yin Qing Expressway for 6.3km, cross Tangwang Interchange for about 830m, and go straight into Qing Ji Expressway.

30. Drive along Jiqing Expressway 188.6km, turn right slightly in the direction of Yantai/Penglai/Fangzi /S 16, and enter Yongquan Interchange.

3 1. Drive along Yongquan Interchange 1.6km, cross Yongquan Interchange, turn around and enter Yongquan Interchange, and drive towards Yantai/Penglai.

32. Drive along Yongquan Interchange for 620 meters, enter Weilai Expressway at the entrance.

33. Drive 22.5km along weilai expressway, head for Penglai/Longkou/Zhaoyuan/Laizhou, turn right slightly and enter Mingcun West Interchange.

34. Drive along Mingcun West Interchange 1.3km, cross Mingcun West Interchange and enter Wei Wu Expressway at the entrance.

35. Drive along Wei Wu Expressway for 21.4km, turn left slightly and drive towards Jingwei, and enter Guojiabu Interchange.

36. Drive along Guojiabu Interchange for 600 meters, cross Guojiabu Interchange, drive towards Weihai/Yantai, and turn right slightly to enter Guojiabu Interchange.

37. Drive along Guojiabu Interchange for 660m and enter expressway, Yan Xin at the entrance.

38. Drive along Yan Xin expressway125.4km, and stay in Laixi &>>.

Question 3: How many kilometers is it from Anyang to Chaocheng, Anyang, Henan, China?

123km。 About 1 hour and 39 minutes.

1. Drive west from Wenfeng Avenue to Zhonghua Road.

0.3 km

2. Turn right and enter Zhonghua Road.

1.7 km

3. Turn right and enter 30 1 Provincial Road/Renmin Avenue /S30 1.

2.5 km

4. Turn right on the ramp to G4 Beijing-Hong Kong-Macao Expressway /G4.

Partial toll road section

0.3 km

5. Turn right at the intersection and merge into G4 Beijing-Hong Kong-Macao Expressway /G4.

Toll road section

9.5 km

6. Exit S22 East/Neihuang/Nanle and get on S22 Lin Nan expressway /S22.

Toll road section

86. 1 km

7. Get off the freeway and get on provincial highway 209 /S209.

Partial toll road section

1.4km.

8. Turn left and enter provincial highway 209 /S209.

1.7 km

9. Turn right into provincial highway 30 1/ provincial highway 324 /S30 1/S324.

Continue along provincial highway 324 /S324.

19. 1 km

10. Turn right.

The destination is on the left.

0.7 km

Chaocheng Town, Shen County, Liaocheng City, Shandong Province, China

Question 4: How many kilometers is the driving route from Anyang to Penglai, Shandong? The whole journey is about 7 12.0 km.

Starting point: Anyang city

1. Anyang driving plan

1) Depart from the starting point to the south, drive along Wenfeng Avenue 10 meter, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue for 230 meters and turn left into Yongming Road.

3) Drive along Yongming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 1.8km and turn right ahead.

5) Drive 320 meters, turn left slightly in the direction of Handan/Beijing, and enter Anyang overpass.

2. Drive along Anyang overpass for 690 meters, turn right ahead and enter Beijing-Hong Kong-Macao Expressway.

3. Drive along the Beijing-Hong Kong-Macao Expressway for 35.7 kilometers, turn right slightly in the direction of Handan Ring Road/Jinan/Changzhi /G22, and get on the ramp.

4. Drive along the ramp 1.5km and go straight into Handan Ring Expressway.

5. Drive along Handan Ring Expressway for 36.2km, turn right slightly and get on the ramp.

6. Drive along the ramp 1.3km and go straight into Qinglan Expressway.

7. Drive along Qinglan Expressway for 73.2km and go straight into Jiliao Expressway.

8. Drive along Jilin-Liaoning Expressway 128.3km, drive in the direction of Qingdao/Zibo/International Airport /G20, and turn left slightly to enter Jinan Ring Expressway.

9. Drive along Jinan Ring Expressway 14.4km, turn right slightly in the direction of Qingdao/Zibo, and enter Biaoshi intersection.

10. Drive along the intersection of Biaozimiao for 850m and go straight into expressway, Yin Qing.

1 1. Drive along Yin Qing Expressway12.6km and go straight into Beijing-Shanghai Expressway.

12. Drive along Beijing-Shanghai Expressway 10.4km, then turn right slightly to enter Yin Qing Expressway.

13. Drive 6.8km along expressway, Yin Qing, drive towards Qingdao/Zibo, and go straight on the ramp.

14. Follow the ramp1.2km and go straight into expressway, Yin Qing.

15. Drive along Yin Qing Expressway 188.8km, go to Yantai/Penglai/Fangzi /S 16, turn right slightly and enter Yongquan overpass.

16. Drive along Yongquan overpass for 2.2km and go straight into Roewe expressway.

17. Drive along the Roewe Expressway for 22.5km, head for Penglai/Longkou/Zhaoyuan/Laizhou, turn right slightly and enter the Mingcun West overpass.

18. Drive along Mingcun West Overpass1.2km and go straight into expressway, Wei Wu.

19. Drive along Wei Wu Expressway for 23.0km and go straight into Wurong Expressway.

20. Drive along Wurong Expressway 125.3km, get off at Penglai/Changdao/Laixi exit, turn right slightly and enter Penglai West Interchange.

2 1. Drive along Penglai West Interchange for 360m, and then turn right.

22. Yantai driving plan

1) Drive for 450m, head for Penglai, turn right and enter S2 13.

2) Drive along S2 1318.5km, and go straight into Zhonglou South Road.

3) Drive along Zhonglou South Road for 2. 1 km, and turn right into Zhonglou East Road.

4) Drive 200 meters along Chonglou East Road and turn around and enter Chonglou East Road.

5) Drive along Zhonglou East Road 1 10 meters to the destination (on the right side of the road).

End point: Penglai city

Question 5: How many kilometers is the driving route from Anyang to Shandong? The whole journey is about 268.3 kilometers.

Starting point: Anyang city

1. Anyang driving plan

1) Depart from the starting point to the south, drive along Wenfeng Avenue 10 meter, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue 1.9 km and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right to Renmin Avenue/Beijing-Zhuhai Expressway.

4) Drive along Renmin Avenue for 270 meters and turn right ahead.

5) Drive for 320 meters, head for Hebi/Zhengzhou, turn right slightly and enter Anyang overpass.

6) Drive along Anyang overpass for 430m and go straight into Beijing-Hong Kong-Macao Expressway.

7) Drive along the Beijing-Hong Kong-Macao Expressway for 9.0km, head for Neihuang/Nanle /S22, turn right slightly and get on the ramp.

2. Follow the ramp 1. 1 km and go straight into expressway, Lin Nan.

3. Drive along Lin Nan Expressway for 6 1.4km, and turn right slightly in the direction of Nanle/Puyang /G45 on the ramp.

4. Drive along the ramp for 970 meters and go straight into Daguang Expressway.

5. Drive along Daguang Expressway for 25.4km, heading for Puyang North/Fanxian /S26, and turn right slightly on the ramp.

6. Drive along the ramp1.7km and go straight into expressway, Fan Hui.

7. Drive along Fan Hui Expressway for 54.0km, turn right slightly and get on the ramp.

8. Drive along the ramp for 760m and go straight into Suntech expressway.

9. Drive along Suntech Expressway for 57.5km and go straight into Jiguang Expressway.

10. Drive along Jiguang Expressway for 350 meters, turn right slightly and get on the ramp.

1 1. Drive along the ramp for 440 meters, turn right ahead and enter Rilan Expressway.

12. Drive along Rilan Expressway for 38.9 kilometers, get off at Juye/Yuncheng Exit, turn right slightly and enter Suiguantun Interchange.

13. Drive along Suiguantun Interchange 170 meters. After passing the Suiguantun Interchange for about 1.3 km, go straight into S254.

14. Heze driving plan

1) Drive along S254 for 5.7 kilometers and turn left into beiyuan road.

2) Drive along beiyuan road for 3.5km and turn right into Xinhua Road.

3) Drive along Xinhua Road for 590 meters and turn left into Gucheng Street.

4) Drive along Gucheng Street for 470 meters, pass the Aleck Fashion Expo store on the right for about 200 meters, and you can reach your destination (on the left side of the road).

End point: Juye County

Question 6: How many kilometers is it from Anyang, Henan Province to Qihe County, Dezhou, Shandong Province? Driving route: the whole journey is about 284. 1 km.

Starting point: Anyang city

1. Anyang driving plan

1) Start from the starting point to the west, drive along Wenfeng Avenue for 60 meters, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue for 2.0km and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 190 meters and go straight into S30 1.

5) Drive along S30 1 for 80 meters, turn right and get on the ramp.

2. Drive along the ramp for 980 meters, turn right ahead and enter the Beijing-Hong Kong-Macao Expressway.

3. Drive along the Beijing-Hong Kong-Macao Expressway for 35.6 kilometers, and turn right slightly in the direction of Handan Ring Road/Jinan/Changzhi /G22.

4. Drive along the ramp 1.3km and go straight into Handan Ring Expressway.

5. Drive along Handan Ring Expressway for 36.9 kilometers, turn right slightly and get on the ramp.

6. Drive along the ramp for 870 meters and go straight into Qinglan Expressway.

7. Drive along Qinglan Expressway for 59.6 kilometers, cross the Jiliaoguan Expressway overpass bridge for about 1.3 kilometers, and go straight into Jiliaoguan Expressway.

8. Drive along Ji-Liao Expressway 136.8km, at Qihe exit, turn right slightly and get on the ramp.

9. Drive along the ramp 1.3 km and turn right into Huanghe Avenue.

10. Qihe county driving scheme

1) Drive along Huanghe Avenue for 3.3km and go straight into Yingbin Road.

2) Drive along Yingbin Road 1.4km and turn left into Qiyan Street.

3) Drive along Qiyan Street for 390 meters and drive on the right? After driving about 260 meters in Qihe Hotel, you will reach the end (on the right side of the road).

End point: Qihe, Shandong

Question 7: How many kilometers is the driving route from Anyang County, Henan Province to Linyi, Shandong Province? The whole journey is about 5 10.9 km.

Starting point: Anyang county

1. Anyang county traffic plan

1) Drive northwest from the starting point, drive along Moshui River Road120m, and turn around and enter Moshui River Road.

2) Drive 870 meters along Ink River Road and enter Angang Avenue.

3) Drive along Angang Avenue for 3.0km, turn right slightly and enter Renmin Avenue.

4) Drive along Renmin Avenue for 2.8km and go straight into Renmin Avenue.

5) Drive along Renmin Avenue 170 meters, take the second exit and turn left into Renmin Avenue, heading for Shuguang Road/Zhonghua Road/Beijing-Zhuhai Expressway/Neihuang.

6) Drive along Renmin Avenue for 3.4 kilometers and go straight into S30 1.

7) Drive along S30 1 for 80 meters, turn right and get on the ramp.

8) Drive along the ramp for 690 meters, turn right ahead and enter the Beijing-Hong Kong-Macao Expressway.

9) Drive along Beijing-Hong Kong-Macao Expressway 9. 1km, cross Hongshui River Bridge, head for Neihuang/Nanle /S22, and turn right slightly on the ramp.

2. Drive along the ramp 1.0 km and go straight into expressway, Lin Nan.

3. Drive along Lin Nan Expressway for 6 1.7km, turn right slightly and get on the ramp.

4. Drive along the ramp for 670 meters and go straight into Daguang Expressway.

5. Drive along Daguang Expressway for 25.3km, heading for Puyang North/Fanxian /S26, and turn right slightly on the ramp.

6. Drive along the ramp1.8km and go straight into expressway, Fan Hui.

7. Drive along Fan Hui Expressway for 54.0km, turn right slightly and get on the ramp.

8. Drive along the ramp for 760m and go straight into Suntech expressway.

9. Drive along Suntech expressway for 57.9 kilometers, turn right slightly and get on the ramp.

10. Drive along the ramp for 430m, turn right and enter Rilan Expressway.

1 1. Drive along Rilan Expressway for 248.8km, go to Shanghai /G2, turn right slightly and enter Zhuyuan Lijiao.

12. Drive along Zhuyuan junction for 480m. After passing the Zhuyuan junction for about 380 meters, go straight into Beijing, Shanghai and expressway.

13. Drive along Beijing-Shanghai Expressway for 23.7 kilometers, get off at Linyi/Feixian /G206/G327 exit, turn right slightly and enter Linyi Interchange.

14. Drive along Linyi Interchange for 600 meters, cross Linyi Interchange for about 1. 1 km, and go straight into Shuangling Road.

15. Linyi driving plan

1) Drive along Shuangling Road for 7.0km and go straight into Binhe Road.

2) Drive along Binhe Road for 760m and turn right into Tongda Interchange.

3) Drive along Tongda Interchange 140m, turn right ahead and enter Tongda Road.

4) Drive along Tongda Road for 890 meters, pass through Zhongqu No.1 Village on the right for about 260 meters, and then turn right into Beijing Road.

5) Drive along Beijing Road 1.5km and go straight into G205 (old).

6) Drive along G205 (Old) for 790 meters and turn left into Okawaji.

7) Drive along Okawaji for 270 meters and turn right.

8) Drive 200 meters to the finish line (on the left side of the road).

End point: Linyi City

Question 8: How many kilometers is Anyang from Dongchangfu, Liaocheng, Shandong? Hello, Anyang is from Dongchangfu District, Liaocheng.

About 218.4km/2h31min.

Provide a route for easy reference.

Starting point: Anyang city

1. Anyang driving plan

1) Start from the starting point to the west, drive along Wenfeng Avenue for 60 meters, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue 1.9 km, cross Days Hotel Holland on the right, and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 190 meters and go straight into S30 1.

5) Drive along S30 1 for 80 meters, turn right and get on the ramp.

6) Drive along the ramp for 980m, turn right and enter the Beijing-Hong Kong-Macao Expressway.

2. Drive along Beijing-Hong Kong-Macao Expressway 17.8km, cross Zhanghe Bridge about 1.5km, and go straight into Beijing-Hong Kong-Macao Expressway.

3. Drive along the Beijing-Hong Kong-Macao Expressway for 49.9 kilometers, heading for Jinan/Changzhi /G22, and turn right slightly on the ramp.

4. Drive along the ramp 1.9 km and go straight into Qinglan Expressway.

5. Drive along Qinglan Expressway for 76.3km, cross the Jilin-Liaoguan Expressway overpass about 1. 1km, and go straight into Jilin-Liaoguan Expressway.

6. Drive 56.0km along the Ji-Liao Expressway, cross the Beijing-Kowloon Railway Overpass Bridge, Linqing/Liaocheng Exit, turn slightly right and enter Liaocheng Interchange.

7. Drive along Liaocheng Interchange for 7 10 meters, cross Liaocheng Interchange, turn left and enter S258.

8. Driving scheme of Dongchangfu District

1) Drive along S258 for 4 10 meters, turn right slightly and enter Changrun Road.

2) Drive 520 meters along Changrun Road and enter Jianshe West Road; 3) Drive 2.0km along Jianshe West Road, cross Zhongcheng Commercial Building on the right and turn right into Yu Wei North Road.

4) Drive along Yu Wei North Road 1.7 km and turn left into Dongchang West Road.

5) Drive 820 meters along Dongchang West Road, cross the right international business port for about 90 meters, and enter Liuyuan South Road.

6) Drive along Liuyuan South Road for 2.5km to reach the destination (on the right side of the road).

End point: Dongchangfu District

The above is for your reference, hoping to help you.

I hope to adopt. thank you

Question 9: How far is the driving route from Anyang, Henan to Zhaoyuan, Shandong? The whole journey is about 654.4 kilometers.

Starting point: Anyang city

1. Anyang driving plan

1) Depart from the starting point to the south, drive along Wenfeng Avenue 10 meter, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue 1.9 km and turn left into Guangming Road.

3) Drive along Guangming Road 1.6km and turn right to Renmin Avenue/Beijing-Zhuhai Expressway.

4) Drive along Renmin Avenue for 270 meters and turn right ahead.

5) Drive 320 meters, turn left slightly in the direction of Handan/Beijing, and enter Anyang overpass.

2. Drive along Anyang overpass for 690 meters, turn right ahead and enter Beijing-Hong Kong-Macao Expressway.

3. Drive along the Beijing-Hong Kong-Macao Expressway for 35.6 kilometers, turn right slightly in the direction of Handan Ring Road/Jinan/Changzhi /G22, and get on the ramp.

4. Drive along the ramp 1.6km and go straight into Handan Ring Expressway.

5. Drive along Handan Ring Expressway for 36.2km, turn right slightly and get on the ramp.

6. Drive along the ramp 1.3km and go straight into Qinglan Expressway.

7. Drive along Qinglan Expressway for 20 1.7km and go straight into Jinan Ring Expressway.

8. Drive along Jinan Ring Expressway 14.5km, turn right slightly in the direction of Qingdao/Zibo, and enter Biaoshi intersection.

9. Drive along Bai Biao Miaolukou Interchange for 720m, cross Bai Biao Miaolukou Interchange for about130m, and go straight into Beijing-Shanghai Expressway.

10. Drive along Beijing-Shanghai Expressway for 23.0km, cross Lianhua Interchange, turn right slightly in the direction of Qingdao/Zibo/International Airport, and enter Yin Qing Expressway.

1 1. Drive along Yin Qing expressway for 6.8km, drive in the direction of Qingdao/Zibo, and go straight on the ramp.

12. Drive along the ramp for 350m, cross Tangwang Interchange for about 900m, and go straight into expressway, Yin Qing.

13. Drive along Yin Qing Expressway 189.0km, go to Yantai/Penglai/Fangzi /S 16, turn right slightly and enter Yongquan overpass.

14. Drive along Yongquan overpass for 820m, cross Yongquan overpass for about1.3km, and go straight into Roewe Expressway.

15. Drive along the Roewe Expressway for 22.5km, head for Penglai/Longkou/Zhaoyuan/Laizhou, turn right slightly and enter the Mingcun West overpass.

16. Drive along Mingcun West Interchange for 950m, cross Mingcun West Interchange for about 280m, and go straight into Wei Wu Expressway.

17. Drive along Wei Wu Expressway for 22.2km, cross Guojiabu Interchange and go straight into Wurong Expressway.

18. Drive along Wurong Expressway for 73.4km, get off at Zhaoyuan/Sanshandao Exit, turn right slightly and enter Zhaoyuan Interchange.

19. Drive along Zhaoyuan Interchange for 3 10 meters. After crossing Zhaoyuan Interchange for about 700 meters, go straight into S304.

20. Yantai driving plan

1) Follow S304 1 1.3km, turn left slightly and enter Wenquan Road.

2) Drive along Wenquan Road for 2.7 kilometers and enter Luo Feng Road.

3) Drive along Luo Feng Road for 260m and enter Fu Qian Road.

4) Drive 200 meters along Fu Qian Road to the finish line (on the left side of the road).

Destination: Zhaoyuan City

Question 10: How to get to Heze, Shandong by car from Anyang, Henan, and how many kilometers? Driving route: The whole journey is about 233.2km.

Starting point: Anyang city

1. Anyang driving plan

1) Start from the starting point to the west, drive along Wenfeng Avenue for 60 meters, and turn around and enter Wenfeng Avenue.

2) Drive along Wenfeng Avenue for 280 meters and turn left into Yongming Road.

3) Drive along Yongming Road 1.6km and turn right into Renmin Avenue.

4) Drive along Renmin Avenue 1.7km and go straight into S30 1.

5) Drive along S30 1 for 80 meters, turn right and get on the ramp.

6) Drive along the ramp for 690 meters, turn right ahead and enter the Beijing-Hong Kong-Macao Expressway.

7) Drive along Beijing-Hong Kong-Macao Expressway 9. 1km, cross Hongshui River Bridge, head for Neihuang/Nanle /S22, and turn right slightly on the ramp.

2. Drive along the ramp 1.0 km and go straight into expressway, Lin Nan.

3. Drive along Lin Nan Expressway for 6 1.7km, turn right slightly and get on the ramp.

4. Drive along the ramp for 670 meters and go straight into Daguang Expressway.

5. Drive along Daguang Expressway for 25.3km, heading for Puyang North/Fanxian /S26, and turn right slightly on the ramp.

6. Drive along the ramp1.8km and go straight into expressway, Fan Hui.

7. Drive along Fan Hui Expressway for 54.0km, turn right slightly and get on the ramp.

8. Drive along the ramp for 760m and go straight into Suntech expressway.

9. Drive along Suntech Expressway for 50.0km, exit at G220/ Heze/Huang An, turn right slightly and get on the ramp.

10. Drive along the ramp for 9 10 meters and go straight into G220.

1 1. Heze driving plan

1) Follow G22015.7km, drive towards Renmin Road/Cao Zhou Peony Garden, turn left slightly and enter Renmin North Road.

2) Drive 3.4km along Renmin North Road, cross Shuanghe Interchange and go straight into Renmin Road.

3) Drive along Renmin Road for 2.9 kilometers and enter Zhonghua Road.

4) Drive along Zhonghua Road 1.3km, turn right slightly and enter Zhonghua Road.

5) Drive along Zhonghua Road for 60 meters and reach the destination (on the right side of the road).

End point: Heze City