Traditional Culture Encyclopedia - Hotel accommodation - How to install a storage water heater

How to install a storage water heater

A storage water heater is a storage water heater that can store hot water. Its installation is very simple. Preparations must be made before installation, and relevant equipment needs to be purchased. When installing, pay attention to connecting the gas water heater, then use a hose to connect the gas pipe, install the gas meter on the water heater on the gas pipe, and then install the hot water valve and heating rod connected to the water heater to heat the water into hot water. This is used for bathing and other purposes. Now many people on the market have installed this kind of water heater. So, do you know how to install a storage water heater? How to install a storage water heater? Let’s find out together below!

1. Before installation, check the water and electricity to see if the water heater is damaged, whether there is any damage, and whether there is any water leakage. If it is, repair it in time. If it needs to be reinstalled after repair, you need to Purchase a new water heater.

Gas water heaters are consumables, so before purchasing, you should also pay attention to the quality of the water heater brand. If it is an imported product, the price will be relatively more expensive; if it is a domestic product, the price will be higher. A little cheaper. Before choosing, it is recommended that you consult the dealer before purchasing. If you purchase a water heater, you should regularly replace related parts, such as magnesium rods, to prevent damage. After the water heater is installed, relevant inspections need to be carried out.

2. Before installation, pay attention to connecting the gas water heater, then use a hose to connect the gas pipe, then install the gas meter on the water heater, connect the hot water valve and heating rod of the water heater, and when heating the water heater, The water is heated to hot water and can be used for bathing.

The principle of a storage water heater is to use the principle of water circulation to heat water to achieve constant water temperature, and does not require an external heating rod. Therefore, storage water heaters can be used not only in homes, but also in hotels, hotels and hotels. Such as bathrooms, etc. Suitable for many different occasions. It can store water and use hot water for bathing. Generally, low-pressure water circulation is used for water supply. A small amount of water will be produced during use and stored in a water storage barrel. The stored water will be heated into hot water over a period of time, making it easy to use. This kind of water heater needs to control the water level before it can heat the water it needs into hot water. If the water temperature is not enough, it will automatically shut down or stop the water supply. You can also remove the heating rod and put it in the basin for a few hours to let it heat itself. Use it to heat it when you need to take a bath.

3. Before installing the water heater, you need to check whether the gas pipeline is smooth and whether there is air leakage.

If not, the pipe needs to be replaced or inspected. When installing a gas water heater, be careful not to use electric heating rods. After the electric water heater is powered on, the heating temperature cannot exceed 60 degrees. If this temperature is exceeded, the heating function will automatically stop. It is generally recommended to choose a low-temperature hot water water heater. If the temperature exceeds 30 degrees, it is best to choose an antifreeze protector. Prevent water leakage. It is recommended to perform an inspection before use.

4. When installing, pay attention to the direction of the upper and lower gas pipes of the water heater. Keep a certain distance between the water heater and the gas pipes. If the distance is too close, metal pipes or casings can be used to connect them.

After installing the gas meter on the water heater, install the hot water valve and heating rod connected to the water heater. When heating, the water will be heated to hot water before use. After the installation is completed, the drain pipe of the water heater needs to be unclogged. Also note that the hoses connecting the water heaters need to be fixed, and a safety protective cover needs to be installed on the water heater to prevent electric shock. Do not place the water heater under the stove.

5. When installing hot water valves and heat switches on gas water heaters, appropriate locations and sizes should be used for control.

Since gas water heaters use gas, they must use gas water heater products with safety signs. During installation, the gas meter on the gas pipeline should be installed and fixed. After the gas pipeline is connected, connect the upper gas meter of the gas water heater to the gas meter. Then install the hot water valve and heating rod of the gas water heater, and connect the pipes for the water heater.

Next, use a hose to connect the gas pipe to the water heater, then connect the water heater directly to the gas pipe, and then connect the water heater to the gas pipe. After installing the gas meter in the gas pipeline, the water heater must be heated, so that after the water is heated, there will be hot water for bathing or bathing. Of course, if you have not installed a gas water heater in your home, it is best to keep the gas water heater from leaking as much as possible during use. If you have some ideas about your home before installation, you can discuss it with the merchant in advance. This will make it easier for the installer to install it together with the water heater!

6. First connect the gas meter on the gas water heater, then install the water pipe connecting the water heater pipe and the water heater heating pipe, and finally install the water heater on the water heater to connect the hot water valve, the hot water valve and the heater. The water heater heating rod is heated and ready for bathing.

The installation method of storage water heater is relatively simple and easy to complete. When we choose, we should choose the method according to our actual situation, because the installation of water storage products is relatively simple. Therefore, many families will choose this product to install the bathroom. The disadvantages of storage water heaters are their large size and small capacity, only a few liters of water. Therefore, it is also necessary to install the corresponding storage water heater in advance.

7. Finally, check whether the gas pipeline is blocked.

The gas volume is generally between 15-30. If there is any problem, please notify the maintenance personnel of the gas company immediately to clear it. If not, you can find a professional to handle it. If it cannot be solved, you can ask the gas company to repair it. Install an air switch at the bottom of the water heater. If installed incorrectly, gas leakage may occur.