How many things do hotels with each floor 1000 square meters need to build wireless networks? Is fiber access, wireless AP and wireless routing enough to bridge?

The signals sent by wireless routers and wireless AP can travel far, but they are afraid of walls. A wall can attenuate more than 30% of the signals. The two walls can be attenuated by more than 70%, so it is very easy to drop the line, the network speed will be seriously affected, and it is difficult to use normally. If there are more than three walls, there is basically no signal.

If it's a hotel lobby, it doesn't matter how big it is. A wireless router can cover everything. But if it is a guest room, the situation is completely different, and the effect of using wireless devices is very poor.

If there is no cable when the hotel is renovated, I suggest you use "power line communication equipment", that is, use wires to transmit network signals. The transmitter and receiver of power line communication equipment are plugged into power sockets and transmit network signals with wires. The cost of building a local area network in this way is not expensive (compared with wireless routers and wireless AP), and it is easy to control. If customers want to use network services, they should apply to the hotel, which will issue power line communication equipment and return it to the hotel when the guests check out.

This group is wired receiving equipment.

This group is wireless receiving devices.