Five maintenance rules for hotel lamps to extend the life of lamps.

High-end lighting will quickly become dull if it is not properly cleaned and maintained. Regular cleaning and maintenance of lamps can maintain the brightness of the lamps and extend the life of the lamps. The lampshade becomes dim due to dust. If not treated in time, the brightness will be reduced by about 30% per year on average. That’s why it’s especially important to clean your lampshade, bulb or bulb regularly.

You need to pay attention to the following five rules during maintenance

First, during cleaning and maintenance, you should be careful not to change the structure of the lamp or replace the parts of the lamp. After cleaning and maintenance, the lamps should be installed as they are, and no missing or wrong parts of the lamps should be installed.

Second, when buying a lamp, don’t be busy installing it first. You should carefully read the lamp installation instructions and pay attention to the manual, and then install and use the lamp according to the instructions in the manual, otherwise danger may occur;

Third, when using lamps, try not to use switches frequently. Because the lamp is in the moment of frequent startup, the current passing through the filament during normal operation is greater than the current, so the temperature of the filament rises sharply and accelerates sublimation, which will greatly reduce its service life, so the number of switching times of the lamp should be reduced as much as possible.

Fourth, replace the aging lamp according to the light source parameters provided by the mark. If the lamp tubes at both ends of the lamp are red, the bulb is black or has a black shadow, or the bulb does not light up, it should be replaced in time to prevent unsafe phenomena such as burnout of the ballast;

Fifth, the lamp should Strengthen its maintenance so as to increase its service life. Be sure to wipe with a dry cloth and pay attention to prevent moisture intrusion to avoid long-term rust or short-circuit due to leakage; light bulbs installed on the toilet and bathroom must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; lights installed in the kitchen should pay special attention to preventing oil smoke. Because the accumulation of grease will affect the lighting of the lamp; the light color of the lampshade is better, but it is easier to stick to it, so wipe it hard to avoid affecting the light penetration; if the lamp is non-metal, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect;