How to operate the window air conditioner

The general operation steps of window air conditioner are as follows:

1, the function selection is mainly to operate the function selection knob, which is an electric switch, the compressor is turned on in strong cold gear, and the fan is at high speed; The solid windshield is a compression mechanism and the fan is still running at high speed; Weak cold gear, compressor on, fan at low speed; The weak windshield is a compression mechanism, and the fan is at low speed; When the switch is in the park position, the circuit will be cut off.

2. Temperature adjustment is mainly to operate the temperature adjustment knob, which is actually to adjust the distance between two contacts on the thermostat. The knob adjusts the eccentric wheel, and the distance between the contacts is adjusted by the control lever.

3. Wind direction adjustment is mainly to adjust the wind guide blades on the air outlet grid. The wind direction can be adjusted up and down, left and right, and the purpose of adjusting the wind direction is to form an ideal indoor air circulation airflow.

4. When fresh air operation is necessary, you can operate the new air door handle on the panel and open the new air door. At this time, outdoor fresh air will enter the outdoor along the air duct.