Is the red light of the hotel smoke sensor flashing normally?

The red light flashing of the hotel smoke sensor is normal.

The flashing red light of the hotel smoke sensor indicates that the smoke sensor is in working condition and can be used normally at this time. Generally speaking, it is necessary to install this equipment in public places such as hotels, which can play a very good role in fire prevention. Infrared emission tubes are used to detect smoke concentration, thus preventing the occurrence of fires.

As a common equipment for daily alarm, smoke detector has been extended from a single smoke alarm to electrical fire monitoring detector, temperature-sensitive fire detector and fire temperature-sensitive detector. If it is distinguished by wiring, it can be divided into wireless fire smoke detectors and wired smoke detectors. No matter what kind of detector, it plays a certain alarm role in daily fire prevention and helps to reduce property losses.

Precautions for installing smoke sensor:

1. When installing smoke detectors, it is necessary to control the distance. For indoors, continue to install one every 60 square meters. If it is important equipment, a smoke detector can be installed 0.5 to 2.5 meters above it, which can play a better protection role.

2. When installing the smoke sensor, you need to choose a suitable installation area, fix it with screws only, and connect it to the rotating fixing seat, and you can use it.

3. When installing the smoke sensor, you can locate it according to the hole of the mounting bracket, drill two holes according to the position of the holes, then insert two plastic waist nails, press the back of the bracket against the wall and tighten it until the bottom of the bracket is installed and firmly fixed.