Examples of steps and skills of kitchen flue cleaning method

The problem of cooking fume in the kitchen has always been a key troublesome problem. In order to solve this puzzle, many consumers and friends usually install a range hood, which will match a related kitchen flue to discharge oil fume. But after long-term use, we will undoubtedly find a lot of dust and oil stains buried in the kitchen flue. How can we clean it as soon as possible at this time to ensure their original greater value? What I'm going to introduce to you today is the cleaning method and skill steps of kitchen flue.

1. Introduction to the cleaning of kitchen flue

If the oil fume duct is not cleaned frequently, there will be a lot of oil stains left on the hood and the surface of the oil fume duct, which will form oil stains after a long time. Simple cleaning of the oil fume duct cannot be removed, which will affect the use of the range hood and oil fume duct cleaning and make the smoke flow difficult to eliminate.

about 8% of kitchens have poor smoke exhaust, which is mainly caused by the built-in filter screen of the oil fume purifier not being cleaned for a long time, and the filter screen is blocked by oil pollution. There are unique methods for different types of oil fume purifiers. High-pressure jet is used to strengthen the oiling agent, and then the oil fume pipeline is cleaned and maintained, so that the oil fume airflow is obviously improved and a protective film is formed to prevent oil stains from remaining on the surface.

the cleaning contents of the oil fume pipeline include the surface of the hood, the lampshade inside the hood, the air outlet, the smoke outlet, and the surfaces of the motor and the stove. The cleaning of oil fume pipeline focuses on the cleaning of oil fume exhaust pipeline where the smoke outlet is connected with the hood and is synchronous and parallel with the hood. Focus on thoroughly cleaning the interior of parallel oil fume pipes. The main method adopted is that professionals enter the interior of the oil fume pipeline to clean it. For the smoke exhaust port is narrow, so that people can't enter the oil smoke pipeline or the oil smoke pipeline can't be cleaned because it is narrow and inaccessible by people, but there are major hidden dangers, the company can use special equipment to clean it, leaving no dead ends, and can take comparative photos before and after cleaning, so as to dispel customers' doubts and worries and eliminate all potential fire hazards.

There are generally two ways to connect fans and cabinets with oil fume pipes: one is soft connection with canvas, and the other is hard connection directly with oil fume pipes. Can provide the service of replacing the connecting canvas of fan and air cabinet. If the lampblack pipeline is hard connected, we will thoroughly clean the lampblack pipeline connected with the fan and air cabinet.

2. Cleaning method of oil fume pipeline

1. Cleaning method of oil fume pipeline 2: Manual entry

This method is suitable for parallel flue larger than 4 cm, and manual drilling for cleaning. This method is labor intensive, so attention should be paid to ventilation and low-voltage lighting equipment.

2. Cleaning method 3 of the oil fume pipeline: disassembly

When there is no way for manual workers to enter the oil fume pipeline, the disassembly method can be adopted. This method is the most thorough cleaning method, but it is difficult to construct, requires a lot of labor and costs a lot. Technicians first calculate the distance difference of disassembly according to the actual situation of the flue, and then extend the two sides to clean.

3. Cleaning method 1 of oil fume pipeline: opening holes

This method is relatively easy and the cost is relatively low. Technicians are required to calculate the interval distance, position, size and number of holes to be opened, then clean the oil fume pipeline through these holes, and finally seal each hole. Opening method is used when manual method and disassembly method cannot be cleaned.

4. Method 4 for cleaning oil fume pipes: Cleaning machinery and equipment

This method can be used for oil fume pipes with less oil pollution and shorter cleaning cycle, which is the least difficult, easy to operate, and has the least workload and lowest cost. Spray cleaning agent in the pipeline, and after the oil stain softens, clean it with electric flexible shaft brush.

5. Method 5 for cleaning oil fume pipes: airborne

This method is mainly suitable for cleaning vertical oil fume pipes over 5 cm. The top and bottom sections of the pipeline are disassembled by technicians, who wear safety ropes to clean the dirt in the flue from top to bottom. This method is dangerous, with high technical requirements and high cost, but the cleaning effect is good.

The above example is about the cleaning method of kitchen flue. From this, we can know that after long-term use, this kind of flue used to remove kitchen oil stains often has a lot of dust and oil stains on its surface, which needs to be cleaned in time. If it is not cleaned immediately, it will damage its own service life and the effect of exhausting oil fumes. But how can it be cleaned quickly? The answer is to choose some suitable tool materials, such as some soluble oil fume cleaning agents, which can come in handy.