I bought an air conditioner in mitsubishi electric. What should I do if the indoor machine drips?

The causes and solutions of air conditioning dripping are as follows:

65438+ The horizontal position of the indoor machine body is improperly installed, the horizontal position of the indoor machine is inclined, and the position of the pipeline intersection is too high, which leads to the blockage of condensate discharge.

Solution: move the air conditioner, re-calibrate the position of the air conditioner with ordinary liquid level, and try to trim or lower one end of the outlet of the air conditioner condensate pipe.

2. Poor drainage of the drainage pipe: Because the drainage pipe is aging, slack or bent into waves, poor drainage can easily lead to dripping of the air conditioner. Secondly, the drain pipe leading out of the room is artificially blocked or the drain is blocked by stolen goods, which leads to dew condensation and cannot be discharged.

Solution: Contact the manufacturer or qualified repairer to replace the drain pipe. Of course, if your hands-on ability is super strong, you can buy an ordinary pvc thin tube instead, but it is difficult to construct the outdoor unit and it is more troublesome to remove the protective tape.

3. Dew condensation on the pipeline: Due to the poor quality or thin insulation material on the pipeline or incomplete package, dew condensation will occur when the refrigerant in the pipeline passes through.

Solution: This is our common indoor pipe dripping phenomenon. When this happens, we should first take apart the tape and check whether the insulation material is aging or installed correctly. If cracks or thinning are found, we can repackage them. At the same time, the aging adhesive tape can be replaced to maintain the tightness of the copper tube.

Matters needing attention in installing air conditioners in mitsubishi electric:

1, the installation height is too low from the ground.

According to the national air conditioning installation standard, the distance between the outdoor unit of the air conditioner and the ground should be higher than 2.5 meters, and it is not allowed to occupy public sidewalks. This is to avoid the danger of electric shock, but in some places, air conditioners are often installed directly on the ground, which is a safety hazard, and everyone must pay attention.

2. The external air conditioner is installed too tightly.

This kind of air conditioning installation is often seen, especially on the high-rise buildings in cities and the external walls of hotels. This kind of installation is also irregular, which is not conducive to air conditioning heat dissipation and is easy to overheat.

3, air conditioning bracket is not firm

External air conditioners must be installed with brackets, so the brackets must be regular. If the unqualified bracket is corroded and rusted by rain for a long time, it is easy to cause safety accidents.

4. The location of the external machine is inconvenient for maintenance.

The installation position of the outdoor unit of the air conditioner also needs special attention, because it needs maintenance more or less in the future. If the location is too hidden, it will be very troublesome in the future installation and disassembly, and it will also have certain hidden dangers to the personal safety of operators.