Traditional Culture Encyclopedia - Hotel accommodation - How far is Shanghai from Huzhou Anji?
How far is Shanghai from Huzhou Anji?
Starting point: Jiangsu Road
1. Shanghai urban driving plan
1) Starting from the starting point in the direction of true north, drive along Jiangsu Road for 380m, pass through the right middle and west building for about 220m, and then turn around and enter Jiangsu Road.
2) Drive along Jiangsu Road 1. 1 km, cross Shenya Financial Plaza on the right for about 80 meters, and turn right into Yan 'an West Road.
3) Drive along Yan 'an West Road for 400 meters, pass Shanghai Yan 'an West Road and Yihe Hotel for about 160 meters on the right, and then turn right slightly in the direction of Yan 'an Elevated Road/Hongqiao Hub.
4) Drive 250 meters along the ramp and go straight into Yan 'an Elevated Road.
5) Drive 6.8km along Yan 'an Elevated Road, cross xin jing Harbour Bridge, turn left slightly in the direction of Huzhou/Hongqiao Hub (South) /G50/ National Convention and Exhibition Center, and enter Shanghai-Chongqing Expressway.
2. Drive along the Shanghai-Chongqing Expressway120m, cross the outer ring Huqingping overpass and go straight into the Shanghai-Chongqing Expressway.
3. Drive along the Shanghai-Chongqing Expressway 173. 1km, drive in the direction of Anji/Hangzhou /S 14, turn right slightly, and enter the Sian Hub.
4. Drive along Sian Hub 1.4km, pass Sian Hub for about 170m, and then go straight into Hangchang Expressway.
5. Huzhou driving scheme
1) Drive along Hangchang Expressway 17.7km, exit at Anji North /S204, turn right slightly and enter Anji North Interchange.
2) Drive 620 meters along Anji North Interchange and go straight.
3) Drive 340m, turn left and enter Maliang Line.
4) Drive along Maliang Line for 2.6 kilometers, turn right towards Ancheng/Anji City, and enter Manan Line.
5) Drive 6.2km along Manan Line, turn right slightly and enter Shanda Line.
6) Drive along Shanda Line 2. 1km and go straight into Shanda Line.
7) Drive along the Shanda Line for 300 meters, take the second exit, turn left slightly in the direction of Anji City /S20 1 and enter the Shanda Line.
8) Drive along Shanda Line for 2. 1 km, cross Qing Ji Bridge and turn right into Lingfeng North Road.
9) Drive along Lingfeng North Road 1. 1 km and turn left into Shengli West Road.
10) Drive along Shengli West Road for 3 10 meters and enter Hongfeng Road.
1 1) Drive along Hongfeng Road 1 10 meters, and then turn right.
12) Drive 20 meters to the finish line.
End point: Anji
Question 2: How many kilometers is it from Shanghai to Anji? The route to Anji County, Huzhou City, Zhejiang Province is 250 kilometers, about 3 hours 12 minutes. Shanghai 1. From Wang Ting Road to the southeast, take Huaihai Middle Road for 46 meters. 2. Turn right at Huaihai Middle Road and drive for 0.6km.. 3. Turn left at Chongqing Middle Road for 6 meters. 4. Continue to drive 9 meters along Chongqing South Road. 5. Take Chongqing South Road 4 1 m on the ramp. 6. Take the left ramp and take the north-south elevated road for 2.5 kilometers. 7. Get out of the inner ring elevated road. The upper inner ring is elevated 326 meters. 8. At the intersection, continue to the right in the direction of the inner ring viaduct. Take the inner ring elevated road for 4.6 kilometers. The exit is 8.0km 10 from humin elevated road. Continue to drive along some toll sections of Shanghai-Hangzhou Expressway 142km 1 1. Take Hangzhou Ring Road/Hangzhou North/Lin 'an/Qiandao Lake/Anji/Huangshan Exit 22.4km 12. Xiamoganshan Road /G 104/ Huzhou/Liangzhu/Anji/Anji Zhuboyuan/Shangougou/Shuangxi Drifting Exit. Go to 104 national highway/104 national highway 480m 13 toll section. At the intersection, continue to turn left and drive towards 104 national highway/104 national highway. Take 104 national highway/104 national highway 16.4km 14. Take exit 4 1.6km 15 of provincial highway 04. At 1 1 provincial road, turn right slightly for 405m m. Take the third exit at provincial highway114.4km. 17. Turn right 47m 18. Turn left 2. 1 km 19. Turn right 4.2km in Anji County, Huzhou City, Zhejiang Province.
Question 3: How far is it from Shanghai to Anji? * * * 221.7km, 2 hours15min.
Charge 95 yuan
Question 4: Shanghai to Anji, self-driving route: the whole journey is about 222.9 kilometers.
Starting point: Shanghai
1. Shanghai urban driving plan
1) Drive 40 meters southeast from the starting point and turn right into Renmin Avenue.
2) Drive 420 meters along Renmin Avenue and turn left into Huangpi North Road.
3) Drive along Huangpi North Road for 2 10 meters, pass through the bus friendship building on the right for about 70 meters, and enter Yan 'an East Road.
4) Drive along Yan 'an East Road for 4 10 meters, cross Yan 'an East Road overpass and go straight.
5) Drive for 20 meters and go straight into Yan 'an Middle Road.
6) Drive 60 meters along Yan 'an Middle Road, cross Yan 'an East Road overpass, go all the way to Shimen, turn right slightly and enter Yan 'an Middle Road.
7) Drive along Yan 'an Middle Road 160m, turn right slightly in the direction of Weihai Road/Shimen No.1 Road and enter Yan 'an Middle Road.
8) Drive 320 meters along Yan 'an Middle Road and turn left into Shimen No.1 Road.
9) Drive along Shimen Road 10 meter and enter Yan 'an Middle Road.
10) Drive along Yan 'an Middle Road150m. After passing Shaanxi Building on the right for about 220 meters, turn right slightly in the direction of Yan 'an Elevated Bridge/Hongqiao Hub.
1 1) Drive 10 meters straight.
12) Drive for 350 meters, cross Rongbang Building on the left and enter Yan 'an Elevated Road at the entrance.
2. Drive along Yan 'an Elevated Road 10.0km, turn left slightly in the direction of Huzhou/Hongqiao Hub (South) /G50, and enter Shanghai-Chongqing Expressway.
3. Drive along Shanghai-Chongqing Expressway 173.2km, drive in the direction of Anji /S 14, turn right slightly, and enter Xi 'an Hub.
4. Drive along Xi 'an Hub 1.5km, cross Xi 'an Hub, and enter Hangzhou-Changzhou Expressway at the entrance.
5. Anji County Driving Plan
1) Drive along Hangchang Expressway 18.8km straight ahead.
2) Drive 10 meter, turn left and enter Maliang Line.
3) Drive along Maliang Line for 2.4km, heading for S306/ Majiadu, turn left slightly and enter Maliang Line.
4) Drive along Maliang Line for 2.8km and go straight into S 1 1.
5) Follow S 1 1 drive 10.2km and turn left into Tianhuangping North Road.
6) Drive along Tianhuangping North Road for 800 meters and turn right into Lingzhi West Road.
7) Drive 420 meters along Lingzhi West Road and turn left into Xianghe Road.
8) Drive along Xianghe Road 160m, pass by Puyuanming Building on the left for about 90m, and turn right.
9) Turn right after 70 meters.
10) Drive 30 meters to the finish line.
End point: Anji county
Question 5: How long does it take from Shanghai to Anji, Zhejiang? Jing 'an District, Shanghai 1. Walk 300 meters southwest from Beijing West Road to Changde Road. 2. Turn left slightly and continue to drive along Beijing West Road for 400 meters. 3. Turn left slightly at Urumqi North Road for 400 meters. 4. Turn right on Yan 'an West Road for 700 meters. 5. Turn left slightly and continue along Yan 'an West Road 1.0 km. 6. Go up the ramp and take the Yan 'an Elevated Road for 6.6 kilometers. 7. quit. Take Highway A9 for 400 meters. 8. Turn left slightly on 8.A9 Expressway, and the toll section is 48.6km.. 9. Continue at Hu Fen Toll Station and get on the toll section of Shanghai-Jiangsu-Zhejiang Expressway for 49.9 kilometers, 10. At the Suzhou-Zhejiang toll station, go straight. 74.7 km toll section of Shanghai-Shenzhen-Jiangsu-Zhejiang-Anhui Expressway 1 1. Cheyenne-Ji/Hangchang Expressway exit takes Hangchang Expressway toll section 19.4km 12. 550m 13 of the toll section at the north exit of Xia 'anji. Turn left 600 meters 14. Turn left at Maliang Line for 4.6 km 15. Continue straight into the provincial road 1 1. Turn left slightly and continue along provincial road 1 1 for 48m 17. Continue onto Tianhuangping North Road for 900m 18. Continue to walk on Tianhuangping Middle Road for 300m 19. Turn right at 400 meters on Wuyuan West Road. Turn right at 70m of Xianghe Road, 265438.
Question 6: How many kilometers is the driving route from Anji in Huzhou to Jiading in Shanghai? The whole journey is about 220.6 kilometers.
Starting point: Anji county
1. Anji county driving plan
1) Start due south from the starting point, drive for 30 meters and turn left.
2) Drive 70 meters and turn left into Xianghe Road.
3) Drive along Xianghe Road for 250 meters and turn left into Lingzhi West Road.
4) Drive along Lingzhi West Road for 700 meters and turn right into Shanda Line.
5) Drive along Shanda Line 1.8km, cross Jiangtangbu Bridge about 190m, and go straight into Shanda Line.
6) Drive along Shanda Line for 260m, take the second exit, turn left slightly in the direction of Sanguan /S 14, and enter Shanda Line.
7) Drive 2.2km along Shanda Line and go straight into Manan Line.
8) Drive 6.3km along Manan Line and turn left into Maliang Line.
9) Drive along Maliang Line for 2.5km, turn right and drive in the direction of S 14.
10) Drive 300 meters and go straight on the ramp.
1 1) Drive along the ramp for 800 meters and go straight into Hangchang Expressway.
12) Drive along Hangchang Expressway 18. 1km, turn right slightly and enter Xi 'an Hub.
2. Drive 80 meters along Sian Hub, pass through Sian Hub for about 670 meters, and then go straight into Shanghai-Chongqing Expressway.
3. Drive along Shanghai-Chongqing Expressway 148.9 km, cross He Fangsheng Bridge, go to Anting /G 150 1/ Shanghai Ring Expressway (suburban ring)/jinshanwei, turn right slightly and get on the ramp.
4. Drive along the ramp for 2.6 kilometers, cross the Central River Bridge and go straight into the Shanghai Ring Expressway.
5. Drive along the Shanghai Ring Expressway for 32.7 kilometers, and turn right slightly towards Jiading District/Hu Jia Expressway /S5.
6. Drive along the ramp for 850 meters, cross the Xinhuangnijing Bridge of Jiaxin Highway for about 270 meters, and then go straight into Hu Jia Expressway.
7. Shanghai City Driving Plan
1) Drive along Hu Jia Expressway for 30 meters and go straight into Hu Jia Expressway.
2) Drive along Hu Jia Expressway100m, and go straight into Bole South Road.
3) Drive along Bole South Road for 260m, take the 1 exit, turn right in the direction of Jianbang, and enter Jiajian Highway.
4) Drive along Jiajian Highway160m and turn left.
5) Drive 40 meters to the finish line.
End point: Jiading District * * *
Question 7: How many kilometers is the long-distance bus mileage from Shanghai to Anji County? Driving route: the whole journey is about 220.3 kilometers.
Starting point: Shanghai
1. Shanghai urban driving plan
1) Depart from the starting point to the southwest, drive along Renmin Avenue for 470 meters, and go straight into Weihai Road.
2) Drive 200 meters along Weihai Road and turn left into Chongqing North Road.
3) Drive 490 meters along Chongqing North Road and turn right into Yan 'an East Road.
4) Drive 80 meters along Yan 'an East Road and go straight into Yan 'an Middle Road.
5) Drive along Yan 'an Middle Road for 6 10 meters. After passing Shaanxi Building on the right for about 220 meters, turn right slightly in the direction of Yan 'an Elevated Bridge/Hongqiao Hub.
6) Drive 390 meters along the ramp and go straight into Yan 'an Elevated Road.
2. Drive along Yan 'an elevated road 1 1.0km, and go straight into Shanghai-Chongqing Expressway.
3. Drive along the Shanghai-Chongqing Expressway 172.4km, drive in the direction of Anji/Hangzhou /S 14, turn right slightly, and enter the Sian Hub.
4. Drive along Sian Hub 1.6km and go straight into Hangchang Expressway.
5. Huzhou driving scheme
1) Drive along Hangchang Expressway 17.8km, get off at Anji North /S204 exit, turn right slightly and enter Anji North overpass.
2) Drive 330m along Anji North Overpass and go straight.
3) Drive 630m, turn left and enter Maliang Line.
4) Drive along Maliang Line for 2.6 kilometers, turn right towards Ancheng/Anji City, and enter Manan Line.
5) Drive along Manan Line for 6.0km and turn left.
6) Drive for 390 meters and turn right.
7) Drive 1.5km and go straight into Tianhuangping North Road.
8) Drive along Tianhuangping North Road for 2.9 kilometers and turn right into Lingzhi West Road.
9) Drive 420 meters along Lingzhi West Road and turn left into Xianghe Road.
10) Drive along Xianghe Road for 240 meters and turn right.
1 1) Drive 80 meters and turn right.
12) Drive 20 meters to the finish line.
End point: Anji county
Question 8: How much does it cost to take a bus from Shanghai to Anji, Zhejiang? How long does it take to get to Shanghai from Anji, Zhejiang by car? No matter which long-distance station you take, the fare is 75 yuan, and it takes about 3 hours to get to Anji.
Question 9: How long does it take Angie to get to Shanghai?
G7343/G7342
(high-speed rail)
Deqing station
09:0 1
Shanghai Hongqiao Railway Station
10:52
The whole journey is about: 1 hour 5 1 minute.
From 93.5 yuan
After 6 stops.
Departure Anji Deqing Station
& gt
Arrive at Shanghai Hongqiao Railway Station.
& gt
Question 10: How can I get from Shanghai to Anji, Zhejiang? 1, it's better to take a bus directly from Shanghai to Anji.
Secondly, take the train to Linping and then take the bus to Anji.
3. Take the train to Hangzhou Station, and then take a bus to Anji at North Bus Station.
- Previous article:Where is Qiannan Riding Longlianjiang Eco-city?
- Next article:All scenic spots in Burqin County are open to the public free of charge.
- Related articles
- Brief introduction of Hongyan's hometown story
- #7Ììhotelgroupstore managerrecruitment#It¡¯s been so many days and there¡¯s still no reply. I must have been eliminated
- Q: Is there a hotel room in Jiashan County, Zhejiang Province on April 4th? It's better to be from Xitang scenic spot, urgent ~ ~! !
- Does Wanda Meihua Hotel Nanchang have foot massage?
- Where is the address of Chengdu Peony City?
- How to get from Chongqing North Railway Station to Days Hotel Elegant Chongqing?
- Basic information of Quanzhou hotel
- Fireflies in Xishuangbanna have entered the best viewing period. Why does this animal seldom appear in cities?
- How far is it from Huizhou Vienna Hotel to Luofu Mountain?
- The basic port refers to the one specified in the liner tariff