How to set the electronic lock of hotel room after replacing the new motherboard? thank you

It depends on whether it is an ID card lock or an IC card lock. The ID card lock is directly set on the lock, and the IC card lock is directly operated by the computer connected to the card issuing machine. The card issuer issues an authorization card to re-authorize the door lock, and the room card is reset after authorization. Generally, the box of the card issuing machine has a CD with its own door lock system, and the operating instructions are all on the CD. The following is the operating instructions of the ID card lock used in my apartment. I use the brand of Marcaster Lee. I don't know if it fits your lock. You'd better choose one and test it first.

Operating instructions for Marcasite Li EM(ID card lock)

First, empty the door lock.

Twist it five times in a row with a mechanical key. Every time you twist it, the door lock will beep, and after five times, the door lock will beep for a long time. The original "mother card" and "daughter card" will all be deleted, and the door lock will be empty.

Second, increase the "mother card":

When the door lock is empty, the first card to be swiped is the "mother card", and the door lock makes a short and long sound to indicate that the mother card is successfully configured.

Third, add "daughter card":

Brush the "mother card", the door lock clicks, the blue light flashes when opening the door, and brush other EM cards. The door lock clicks short, indicating that the card has been added, the blue light flashes again, and so on, until the "mother card" is swiped again or the card is not swiped for 5 seconds.

note:

1. A lock can only have one "mother card";

2. A lock has at most 200 "daughter cards";

3. When adding a daughter card, if the anti-reverse of the door lock is in the open state, the daughter card can open the locked door lock inside, otherwise the card can only open the door lock without anti-reverse;

4. The mother card is not restricted by internal anti-lock braking.

4. Delete "daughter card":

1. Delete all daughter cards:

Brush the mother card five times in a row to clear all daughter cards, and the three long tones of "beep, beep, beep" on the door lock indicate that all daughter cards have been deleted successfully;

2. Delete the daughter card:

Brush the mother card three times in a row, and the blue light flashes quickly. Brush the previous serial number "daughter card" of the daughter card to be deleted (if you want to delete the first daughter card, please use the last daughter card), and the door lock will make a long beep, indicating that the deletion is successful.

Note: If the mother card is lost or needs to be replaced, you must empty the door lock and reconfigure the mother card and daughter card.

Five, open the door:

Method 1: brush the "mother card" to open the door directly;

Method 2: swipe any "daughter card" to open the door;

Set the door lock to normally open: press the inner handle and brush any "daughter card", and the door lock will enter the normally open state. Open the door once in the normal way, and then release the normally open state. (When the gamete is stuck, press and hold the handle or the lock tongue. )

Six, the error prompt:

5 tones: invalid card

6 tones: card deletion error.

14 prompt tone: The last opened key card cannot be deleted. If you want to delete it, please add the door opening card first.

Quick three short rings: the battery is almost dead, please replace it in time.