How to use a natural gas furnace?

1 First unscrew the valve on the gas tank or the switch of the gas pipeline counterclockwise. If it is an electronic ignition gas stove, press the gas stove to ignite and rotate it counterclockwise.

For non-electronic ignition gas stoves, first light a lighter or strike a match, then put the flame at the eye of the stove, then press the ignition switch of the gas stove and turn it counterclockwise. If the flame in the kitchen eye burns normally, let go of the switch. The correct step is to ignite-deflate-sit in the pot,

Be sure to turn off the valve on the gas tank or the switch of the gas pipeline after use.

Matters needing attention

When using the gas stove, keep the room ventilated and don't close the doors and windows for a long time.

Always check whether there is air leakage at the joint between the gas stove and the pipeline. Soap water can be used to smear the parts to be inspected. If bubbles are found, it means that there is a problem and should be repaired in time.

The gas tank should be placed in a ventilated, dry and easy-to-move place, away from fire sources and radiators, and above 1 m from the cooker.

When using the gas stove, don't leave for a long time, lest the wind blow out the flame or the water overflows and douses the flame, causing leakage.