Traditional Culture Encyclopedia - Hotel accommodation - How does LED strip connect the dimming controller?

How does LED strip connect the dimming controller?

1. Connect the 5050 color /RGB soft light bar to the controller. Note that the four lines of the light bar should correspond to the four lines of the controller, and those with arrows should correspond to those with arrows.

2. Insert the DC plug of rubber case power supply into the controller. After confirming that there is no wrong connection and short circuit, connect the 220V plug of the rubber case power supply with alternating current.

3. Remove the battery film on the control panel of the controller and press the key on the control panel to make the light bar change color normally.

Extended data:

Special classification of LED light bars

1, including flexible LED strip and hard LED strip according to the hardness of LED strip;

2. According to the LED specifications in LED strip, there are 5050LED strip, 3528LED strip, 0603LED strip and 3020LED strip (all of which are patch LED strip); And LED great wall light belt.

3. According to the length of LED light band, there are five meters, 1 meter to dozens of centimeters. The length of LED light bar is usually detachable.

4. According to the use of LED strip, there are LED strip for car decoration and LED strip for entertainment places such as KTV bars in hotels. Among them, the single length of LED light bar is generally short.