Tutorial on the practice of rectangular stool cover

The tutorial of the rectangular stool cover is as follows:

1. Proofing the chair with non-woven fabric as it is, and start measuring the size.

2. Cut the thickness and lace of the side. The front and back length of the side has just been measured. Cut it according to the size, and the height is arbitrary, depending on the appearance. The lace ratio is 1.5~2.5 times, and a strip is added on the reverse side of the side thickness for fixing.

3. The bottom edge of lace should also be wrapped, and the side thickness should be rolled.

4. Then combine the side thickness and face, and the lace folding is more beautiful. Of course, you can choose your favorite way to discount.

5. In order to be more perfect, we press the line on the front and install the world's narrowest presser foot. The pressed line is thinner.

6. The chair cover is basically completed, and then an elastic band is added to the fixing strip in thickness, so that the corners of the chair can be buckled and will not slide. Such a stool cover is ready.

Benefits of the cover

1. Dust and pollution prevention

Many people will consider putting a cover on the upper mask when they buy a new chair. One of the advantages is that it can effectively prevent dust and pollution. Even if coffee, red wine stains or even oil stains are dripped, it can be directly removed and cleaned without affecting the chair material itself, and there is no possibility of bleeding, so it is very convenient to clean.

second, high comfort

if you use a solid wood chair, the sitting feeling may be hard, so the comfort is limited. If you put a soft and thick cover on the upper mask, you can turn the hard texture into softness and feel more comfortable sitting.

Third, prolong the service life

Of course, long-term use of the cover on the chair can also effectively prolong the service life of the chair, and the cover can play a certain protective role, avoiding the loss of the chair itself during use, and the possibility of scratching the surface will be much lower.