Standard formula for curtain cutting

1, common form cutting method:

For example, for a fabric with a width of 145CM, the width of the window should be multiplied by twice the number of frames required, and the height of the finished product should be added with a seam of 14cm. The fabric loss of flowers and mosaics should be calculated. For fabrics with a width of 280CM, it should be multiplied by 2 times the window width. If there is a flower spacing, the left and right flowers should be symmetrical, and then the curtain feet should be drawn with light color painting powder, with a seam of 2cm.

2, car fixed folding window cutting method:

For example, for fabrics with a width of 145CM, the net color in the first half of the year should be multiplied by twice the width of the curtain, and the height of the finished product is 4 cm. If there is a flower spacing, it should be multiplied by 2.3 times the window width, and the height of the finished product is 24 cm. The flower spacing should be symmetrical, and the cloth cutting method with a width of 280CM is basically the same. ?

3, casement window curtain cutting method:

If there is an arc position, draw the arc position according to the style, leaving an opening of 1 cm and an opening of 2.5 cm on both sides of the height. The height of the finished product is determined in proportion to the height of the form. ?

4, bay window curtain cutting method:

Ordinary solid wave products are 0.8-0.9 m wide and 0.5 m high, and each wave is made of 1.4 m by cutting and positioning. Remarks: 60% off. Starting point: 12 cm, the second discount 13.5 cm to 0.0 15 cm, and the cycle is 50%.

5. Cutting method of ground wave: The normal body is cut by lace 13cm, and the material length of each drainage wave is cut by 3 times the height of the finished product.

Then fold the width in half, and then add 2.5 cm at the mouth and arc position every 1 m according to the required width, so that the required width can be rounded, and then point out the water bend position. The normal size of point folding is 13 cm, then 6 cm, and so on until the point is finished.

Extended data:

Basic methods of curtain making and cutting;

1, flower shape

Before cutting the cloth, we must first find out the flower position of the cloth. 90% of all printed curtain cloth, embroidered curtain cloth and jacquard yarn-dyed fabric have flower positions. Finding out the position of flowers and showing the most beautiful patterns is very important for the overall effect of curtains.

2. Cutting and taking materials

After finding the flower position, you can cut the cloth. What you need to know is. The cloth is cut according to the flower position, so sometimes it doesn't matter if the cloth is slightly wider or narrower by a dozen or twenty centimeters, but the size of the cloth on the left and right sides is not very important.

Step 3 tidy up

After the cloth is cut, the edges must be handled neatly, otherwise the car will be prone to skew and affect the overall effect.

4, color cloth stitching

After the edge is repaired, it is necessary to make a matching colored cloth. Of course, if you don't use colored cloth, you can save this. Color cloth splicing should pay attention to smoothness and crispness.

5, automobile non-woven belt

Take the non-woven fabric to the car, the key point is not to twist the car, otherwise it will not look good when it is hung.

6. Roll sideways

Turn the two sides of the cloth well, and the width of the sides should be the same, and it should not be wrinkled or inclined. ?