Moen sink installation method

Lead: Moen brand is believed to be familiar to everyone. As a leader in plumbing equipment industry, Moen has always occupied the global high-end market and is widely used in luxury houses, high-star hotels and various villas. Mohn is the inventor of our usual shower. As a high-end product, Moen sink may not be well known, so today Bian Xiao will discuss the installation method of Moen sink with you.

Moen sink installation method

1. Ready

When decorating, the sink is usually emptied, and the specific size of this vacated position needs to be measured on the spot before buying Moen sink, so as to check the size when buying and prevent the embarrassing situation that it cannot be installed and replaced again. When buying Moen sink, you can also choose the most suitable sink according to the decoration theme and living habits. Before the sink is formally installed, the faucet must be installed and connected to avoid water leakage.

2. Installation of sink

Firstly, put the sink into the reserved empty position on the countertop, and connect the water inlet pipe on the faucet installed in the previous step at the water inlet switch. Note that red and blue represent hot water and cold water respectively, so don't confuse them. Then, sewer pipes with overflow holes can be installed. At this time, it is necessary to ensure that the sewer pipe is watertight and the joint with the sink is sealed. After installing the filter, the corresponding sewer pipe may need to be cut because of the uncertain distance, and the cutting joint must ensure good sealing, which is also the reason for frequent water leakage. After the installation is completed, the attached pendant is placed between the countertop and Moen sink to make the box body stable and not shake.

Check the installation

The installation of appeal filter blue can also be installed in this step, because this step is very simple. After that, you can put the water in the sink. You can accumulate more water first, let it out at one time, and check whether there is water seepage. If so, you need to check the installation again. After the completion, you can seal the gap of the countertop with silica gel, and pay attention to the pendant inside. In this step, you must make the whole surface uniform to ensure beauty and good water tightness. After completion, the whole installation process is over, because the sink is the longest used place in daily life. Although Moen sink has a conscience policy of five-year water leakage warranty, in order to reduce unnecessary troubles, it is of course the best choice to install it once to ensure that there is no problem in sealing.

Moen sink is a well-known brand in North America and other places, and its purchase rate is quite high. I believe its excellent quality can bring you a different home experience!