How to install the induction door What are the precautions for installing the induction door?

With the progress of the times, technology is constantly developing. For example, the best-selling automatic door on the market is one of the technological products. Automatic doors don't need to be switched manually, but by remote control or induction. Induction door is a kind of automatic door, which is generally used in banks, hotels and other places. So how to install the induction door? What are the precautions for installing the induction door? Let's take a look with Bian Xiao.

First, how to install the induction door

1. Installation of aluminum alloy box girder: the beams must be parallel, and the error should be within 65438 0 mm.. If the aluminum alloy frame beam is uneven, the door body will be unevenly stressed when moving, which will directly shorten its service life.

2. Installation of door crane: Install the hanger equipment to a specific area of the door with another door crane bolt. During installation, the center of the pulley should be parallel to the door. If it is uneven, it will directly shorten the service life of the pulley. Then hang the pulley on the suspension equipment on the power beam, but the components and guide rails in the power beam should not be damaged during installation, otherwise the pulley will produce abnormal noises such as noise.

3. Install the limit device: firstly loosen the bolt of the limit device, and then accurately embed the limit device into the guide rail of the power beam. However, during installation, it is necessary to determine the opening and closing situation of the door body first, so as to determine the position of the stopper, and then fix the bolt with a hexagon wrench.

4. Height and clearance adjustment of the door body: loosen the screws fixing the hanger, and then adjust the bolts with nuts to adjust the resistance when the door moves.

Second, what are the precautions for installing the induction door?

1. When installing the door body, the height of the door body and the position between the gaps should be adjusted to the best state. For example, the hanger fixing nut can be adjusted to ensure that the door will not make strange noises when moving.

2. Because the belt is always under tension when the door moves, all pressure plates should be bolted to adjust the tension of the belt. Secondly, when installing the ground wheel, the gap between the upper and lower parts of the door body must be the same size.

3. If the operating system fails, first manually detect the door body, turn off its operating switch, and then adjust the door opening direction and speed. Secondly, the installation of the induction probe should be adjusted to the best angle, so as not to touch the antenna.