What are the contents and standards of 5s management and standard 5s management?

(1) Finishing: Divide anything in the workplace into necessary and unnecessary items, leave the necessary items and completely throw away the unnecessary items.

(2) Rectification: put the necessary things in the specified position according to the category, put them neatly and mark them well.

(3) Cleaning: Clean the dirt in the workplace, prevent the occurrence of dirt, and keep the workplace clean and beautiful.

(4) Cleanliness: Institutionalize, standardize, implement and maintain the above 3S facts.

(5) Literacy: Everyone develops good habits, acts according to the rules, and cultivates a positive and enterprising spirit.

2, 5S management content implementation standards

Standard for classification and arrangement of tools and appliances

(1) should be reasonably equipped according to the different shapes, weights and production quantities of products.

(2) Non-standard parts special appliances and standard parts general appliances.

(3) Store the instruments in strict accordance with the fixed drawings.

(4) Spare parts: Spare parts (materials, semi-finished products) on the job site shall be labeled with the price of spare parts and stored in the specified way and quantity; Unqualified products in the workshop should be identified and stored in isolation.

(5) The tooling and measuring tools used for work inspection shall be fixed on the workstation (workbench and equipment) and placed neatly.

(6) The operation card and process card should be attached to the operation position, which can be directly and clearly seen, and their hanging position cannot affect the production operation and equipment operation.

(7) Packaging wastes should be piled up in a fixed position beside the operation process or equipment, and cleaned by special personnel.

(8) Items that need to be temporarily placed in the workshop due to special reasons shall be designated and marked, and transportation passages and fire exits shall not be blocked.

(9) Tool cabinets should be unified and standardized, neatly placed and kept clean. The tools in the cupboard should be placed neatly, and no other items should be placed.

Office desks, chairs, cabinets, etc. The workshop office should be neatly arranged and clean. Documents and materials shall be stored in categories and marked.

(1 1) Dangerous goods and fire-fighting equipment shall be stored separately, and relevant regulations shall be strictly implemented.