With the progress of the times and the popularity of smart homes, how should the wiring be done at home?

It is necessary to design more power sockets on the wall. When wiring, the wires must be hidden and placed by the wall or behind the cabinet, which is safer and more beautiful.

With the improvement of people's economic level and the gradual acceptance of new things in recent years, the popularity of smart homes has become more and more extensive. Many families have begun to use smart home appliances, but when using them, many families will be troubled by wiring problems. Today, share some very practical smart home wiring skills and learn together.

The zero line should be reserved in the bottom box of electrical switch in smart home, and there is only live wire on the ordinary switch panel, but no zero line. If the intelligent switch is installed, let the electrician bring neutral wire, because the intelligent household appliances need neutral wire power supply to work, and those that are not decorated can be reinstalled. The switch with neutral wire is more stable, and the electrical equipment can be started normally under the condition of unstable voltage. But if there is no neutral wire, the single loop power should not be less than 5 watts as far as possible.

Use non-metallic socket bottom box, metal socket bottom box will block the signal, ordinary plastic material can also be used, but try not to choose too shallow bottom box, more than 7 cm is relatively safe. In addition, on the selector switch, each button uses at most two cycles, and the safety performance of two cycles is much better than that of more than three cycles. Keys with more than three turns are too small, which may be inconvenient to use.

The planning of wiring system should be scientifically designed according to the actual situation of the family, so as to lay a solid foundation for good experience in the future, but it is economical and practical without much trouble.