How to repair the broken solid wood stool?

If the material of solid wood is not good, the stool will easily fall apart. How to repair the broken solid wood stool? PChouse, let's take a look.

1, if worn or used for a long time, the legs, rails and railings will come loose. In this case, the parts of the chair should be removed and reinstalled. Note that the parts need to be shaken gently to destroy the adhesive effect of the glue, so that they can be removed or clamped by self-locking, but a gasket must be provided when used to prevent secondary injury to the chair.

2. If the parts in the falcon trough are too loose, it is necessary to add parts to make them firm. If the end of the falcon head is cracked, it should be reinforced. Apply glue to the falcon's head, then tie it tightly with thread, and then wait until the bamboo shoots are dry. Glue the reinforced end firmly to the falcon slot. When inserting the falcon head, be careful not to disturb the silk thread, clamp the joint and let it dry thoroughly.

3. If the crosspiece and railing of the chair are loose or have no supporting parts, it can be repaired by pouring glue at the joint of the chair. However, this method is easy to cause secondary loosening because the viscosity of the glue is limited in time. If you want to repair it completely, you must remove the loose parts on the frame and reinstall them. If the parts at both ends are loose, you should take the whole part apart and reassemble the chair.