How to set the manual locking mode of betech G5 smart lock?

Pita G5 smart lock defaults to automatic locking mode when it leaves the factory, that is, when the door is closed, the lock tongue of the smart lock will automatically pop up within a certain period of time. How to set it if you don't want it to lock automatically, and how to set it to manual locking mode? Let Bian Xiao tell you!

Step for setting manual loc mode

Step one:

Make sure you have at least one master card and one daughter card.

Step two:

Confirm that the smart lock is locked, put the main card into the card swiping sensing area, and wait for the smart lock music to sound and the triangle indicator light to flash.

Step 3:

At this point, take out the daughter card and put it in the card swiping sensing area. If the smart lock beeps and the "√" indicator flashes, it means that it has been set to manual mode.

If the Big5 smart lock you purchased is a magnetic card with a password, you can set it in the following ways.

Step for setting manual loc mode

Step one:

Touch the key with the whole palm and press the random code.

Step two:

Press and hold the "1" key for 4 seconds until the smart lock makes a "beep" sound, then put the main card into the card swiping sensing area, and the smart lock makes a "beep" sound.

Step 3:

"1, 3, 5, 8, 0" on the smart lock keyboard lights up in a T shape, and the setting is successful.

Bian Xiao tip:

In manual mode, if you don't lift the handle and lock it, outsiders can directly press the handle to open the door, which will be more convenient but unsafe. If you don't want manual mode, you can set the smart lock to automatic mode again.

Heart of the King 2 Click on the demo.