What's wrong with the uneven hot and cold shower in the bath?

When there are many people washing, the uneven heat and cold is serious or when there are few people. It depends on your specific system.

How to solve the phenomenon that the water temperature is hot and cold in the bath?

When we take a bath, we often encounter that the water temperature suddenly turns cold or hot in the middle of the bath, which is not suitable for bathing, and then we have to readjust the water temperature, but then it will turn cold and hot, especially in bathhouses, baths, hotels, hotels and other places where people take a bath. On the one hand, when taking a bath, the water temperature is hot and cold, which makes people uncomfortable, and the water temperature is too hot, which is easy to burn the elderly or children who need care.

How to solve the phenomenon that the water temperature is hot and cold in the bath? Let's take a look at what causes the phenomenon that the water temperature is hot and cold when taking a bath.

Usually, when we take a bath, we usually use water mixing parts, whether it is water mixing on the main road or a water mixing part for each nozzle. The principle of water mixing valve is to adjust the inlet ratio of cold water and hot water through a cold water inlet and a hot water inlet, so that the outlet temperature is suitable for using warm water.

1, the water temperature is hot and cold in most cases due to the fluctuation of the water pressure difference between cold and hot water during water mixing, especially when people take a bath, because the number of people taking a bath at the same time is not fixed and always changes, which leads to the fluctuation of the water pressure difference between cold and hot water, and the water coming out of the mixing valve will also be uneven.

2. Another situation is that the water temperature of the water supply changes.

For the first case, at present, many bathing places use double-pipe water supply system (that is, each nozzle has an ordinary water mixing valve). This adjustment method is suitable for places where the water pressure fluctuates little and the personalized water temperature is adjusted, but it is not very good for places where the number of bathing personnel changes greatly. Because the resistance of cold and hot water in and out of each nozzle is different, this will cause water pressure fluctuation, and the outlet temperature of the nozzle will also fluctuate, so if we use traditional double pipes to solve this problem.

In the second case, as long as it is not constantly changing, it is good to readjust the water temperature.

With the long-term accumulated experience in hot water, Shenyang Montauk Fluid Equipment Co., Ltd. developed a pipeline thermostatic valve, which solved the problem that the water temperature is hot and cold when taking a bath.

Pipeline thermostatic valve is an intelligent temperature control product developed on the basis of common water mixing valve. Its basic structure is similar to the common water mixing valve, with a cold water inlet, a hot water inlet and a warm water outlet. The working principle of pipeline thermostatic valve is as follows: at the outlet of pipeline thermostatic valve, there is a sensor for sensing water temperature, which drives the valve core to move by sensing water temperature, opens or closes the cold and hot water inlet, and adjusts the ratio of cold and hot water inlet; When the outlet temperature is set by the temperature knob, when the inlet temperature of cold and hot water and the pressure difference between inlet and outlet change, the sensor drives the valve core to move by sensing the water temperature, and the ratio of the inlet of cold and hot water also changes, thus stabilizing the outlet temperature.

Montauk people advocate "comfortable and energy-saving" hot bath, and we will provide users with quality products and advocate quality life.