How to make the turnover plug of the washbasin?

Use a screwdriver, put the cutter head on the rotatable blade, tap the tail of the screwdriver several times with a hammer, and remove the plug. Precautions for installation of sink:

1, the depth is directly proportional to the strength: splashing water on people is probably the most uncomfortable thing for people. In general, the depth of the washbasin should be directly proportional to the water flow intensity of the faucet installed on it, that is, the faucet with strong water flow can be installed in the deep pool. Never install a large faucet on a shallow pool, or water will splash on you when you use it. In addition, the pelvic floor should have enough radian, not too peaceful.

2, the installation height should be reasonable: whether it is a stand-alone or desktop washbasin, the height of the pool surface or countertop from the ground is usually 0.8 meters, because the pool that is too short will make people feel backache. However, the specific height of the countertop should also consider the height of the user in order to achieve the ideal use effect.

3. The pool edge should be slightly higher than the countertop: the pool edge of the washbasin should be slightly higher than the countertop, but the joint with the countertop must be smooth, so as to wipe the water splashed on the countertop back into the pool without obstacles and facilitate the cleaning of the countertop. The mesa itself must be made of smooth materials, and the edges and corners must be smooth to avoid bumping. The smoothness of the washbasin itself is also very important. With high smoothness, impurities in water are difficult to adhere to the surface, which relatively reduces the number of scrubbing.