How long does it take to get to xi 'an Jianzhu University by taxi from Xi 'an Hao Yue Hotel?

Driving route: The whole journey is about 7.9 kilometers.

Starting point: Xi An Gao Xin Hao Yue Hotel

1. Start southwest from the starting point, drive for 40 meters and turn right.

2. Drive 10 meter, turn left and enter Gaoxin 3rd Road.

3. Drive along Gaoxin No.3 Road 170 meters, cross Block D of Fortune Center Phase II on the left, and turn left into Guangtai Road.

4. Drive along Guangtai Road for 260m and turn left into Gaoxin No.2 Road.

5. Drive along Gaoxin No.2 Road for 240 meters, pass Shaanxi Securities Building on the left for about 130 meters, and then turn right into Second Ring South Road.

6. Drive 5.8km along the South Second Ring Road, cross Yanta Interchange and turn left slightly.

7. Drive 70 meters, cross Yanta Interchange and turn left.

8. Drive 20 meters, cross Yanta Interchange and turn right into Yanta North Road.

9. Drive along Yanta North Road for 760m, cross Dongxin Science and Trade Building B on the left, and turn right.

10. Go ahead for 40 meters and turn right.

1 1. Drive for 20 meters. After passing the west gate of Xi University of Architecture and Technology about140m, turn left and enter Qiangzi Avenue.

12. Drive along Qiangzi Avenue for 30 meters and then turn right.

13. Drive 90 meters to the finish line (left side of the road).

End point: Xi University of Architecture and Technology

It takes about 50 minutes by bus.

Bus route: Ring Road → 3 13, the whole journey is about 7.5 kilometers.

1. Walk about 350 meters from Hao Yue Hotel to Taoyuan Road Station.

2. Take the loop section, and after 6 stops, arrive at the Guanglu Station (you can also take the Second Ring Road/Second Ring Road Line 2, and take Route 7,216).

3. Take bus No.313, pass five stops and arrive at Lujiacun Station.

4. Walk about120m and arrive at Xi 'an University of Architecture and Technology.