Gypsum board ceiling construction process renderings

Gypsum board ceiling construction is a very complex process. From the preparation of the construction to the end of the construction, every step in between can be described as complicated and troublesome. Drywall ceilings are affordable and adaptable and can be decorated with flat tops and a variety of tops. Drywall ceilings are very popular among homeowners. Here, a small section of the grid will bring you the construction techniques of gypsum board ceilings and the effects of gypsum board ceilings.

Gypsum board suspended ceiling construction process renderings

The gypsum board suspended ceiling construction process is as follows:

I. Construction preparation

Preparation of gypsum board suspended ceiling All materials and tools used during construction.

Second, construction premise

Except for the chandelier, all the work on the roof has been completed.

2 Determine the height of the lower end of the boom according to the position of the large keel and the distance between the boom, and weld the end of the boom without the turnbuckle to 40× 40× 4 corner code, boom Secure with Phi 8 expansion bolts and suspended ceiling.

3. Connect the large keel to the boom with a hanging piece, tighten the screws and secure. After fixation, adjust the large keel to a horizontal state;

Gypsum board ceiling construction technical renderings

4, 38 and 50 main keels should be arranged parallel to the direction of the lamp (the gourd should avoid The position of the air openings and light fixtures) to enhance the lateral stability of the large keels and the integrity of the slings.

5. After the middle keel is installed and the elevation, spacing, straightness and lifting weight are accepted to meet the design requirements, the small keel will be installed.

6. When cutting is required, gypsum calcium silicate boards should be cut neatly perpendicular to the ribs on the back of the board.

7. The side keels of the gypsum board ceiling in the corridor, the open water room and the smokeproof room are made of wooden keels. The keel is 20 mm thick and 50 mm wide.

Four. Attention

1. Protection of finished products

1) After installing the keel, you can step on it and hang heavy objects on the keel;

2), during the construction process, pay attention to protect the completed line pipes and other facilities;

3), it is strictly prohibited to cause collision and pollution when installing the suspended ceiling.

Gypsum board ceiling construction technology renderings

Network distribution net small series summary: Through the above small gypsum board ceiling construction technology and gypsum board ceiling renderings, I think everyone must be very clear The craftsmanship and precautions for gypsum board ceilings, what I want to share here can really help everyone, so that everyone has the correct craftsmanship and precautions, so that everyone can have a warm and romantic living space. .

Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiareamp;wb, you can get it for free~