How to install the bed rail? Installation method of bed rail

1. Install the vertical pillar on the base and lock it with screws;

2. After all vertical supports are installed, fix the ferrule and install the lower rail;

3. Install the cross bar on the bedspread on the bedspread and set it in the vertical pillar;

4. Fix the lower end of the bedspread cloth on the bracket with a cloth rope;

5. Install the bottom plate and fix it with screws.

Installation method of bed rail

1, first fixed, fixed at 90 degrees;

2. Insert the matching fixing screws into the positioning holes;

3. Insert the feet into the corresponding fixers respectively and fix the lock catch;

4. Connect the middle two ends with two elbow connecting rods;

5. Lock the spring buckle on the card hole buckle with the connected elbow;

6. Wrap the elbow connecting rod with Oxford cloth mesh;

7. Connect the elbow connecting rod with the fixer;

8. Fix the spring buckle;

9. Smooth Oxford mesh cloth;

10. Connect the pipeline with two straight pipes and tighten the spring buckle;

1 1. Use the linkage straight pipe connecting rod to pass through the connecting seam under the mesh cloth;

12. Fix the interface at one end of the fixing connector;

13. Press the spring buckle of the connecting rod at the other end to push the sleeve back inward;

14. Insert the anchor locating joint, and then pull out the locking buckle;

15, pull up and fasten the Oxford cloth mesh magic button;

16, put the finished bed rail under the mattress for compaction;

17, just lift the fixers on both sides and put down the bed rail;

18 installation completed.

What should I pay attention to when installing fences?

1, the installation of the bed rail can protect children from falling out of bed. In addition, it is necessary to protect all areas in the room, such as installing protective fences on all windows, which can prevent children from climbing up the windows and causing unnecessary danger.

2. When installing fences indoors, you need to pay attention to the distance between railings, which should not be too wide or too narrow. Generally, the control desire is around 10cm. However, the actual size between the railings should be determined according to the child's head, and the child's head should not be drilled out of the fence to avoid unnecessary trouble.

3. It is also important to choose the material of the fence. It is best to choose a stainless steel fence, which has higher guarantee performance and relatively simple cleaning in the later stage. However, due to the different materials and prices of stainless steel, it is necessary to ask nine questions before buying and choose the appropriate pipe diameter to ensure normal use.

How to choose the bed rail?

Step 1: Please make sure what kind of bed you have.

1, it is preferred to determine the type of bed. If it is a flatbed car, just like a desktop, you can put the bed railing directly on the mattress. However, flatbed trucks include: simple wooden boards, box beds and so on.

2. The embedded bed has a groove, and the mattress should be embedded in the groove. Embedded bed also includes: wide bed edge, soft bag bed edge, etc.

Step 2: Understand the classification and characteristics of the bed guardrail in the market.

1, if you want to use it conveniently, you can choose the folding bed rail, and you can remove it when it is not needed. This one is more suitable for flat bed. But whether it can be completely disassembled depends on the height of the flat bed, so we must pay attention to whether the height of the bed rail matches the height of the bed we use when purchasing.

2. The bed railing can also be detached from the embedded bed, but there is no edge of the bed, so it cannot be completely folded down. If the hinge is more bed rail, the effect will be better, but it can't be completely perpendicular to the bed. Because there is an edge between the bed rail and the bed, there will be a certain inclination after folding down, and the inclination depends on the thickness of the edge. It should be noted here that the higher the hinge, the more connection positions, and the bed rail will shake, thus affecting the bed rail.