What if there is water leakage around the shower nozzle?

1. First remove the leaking shower head and remove the screws inside with a screwdriver. After removing the screws, put them aside.

2. Then prepare a crew cut screwdriver to pry it from the edge, pry open a gap, break it by hand, and then replace the sealing ring inside.

3. Next, prepare sealant and apply it to the side of the sealing ring and the outer ring. Finally, just reinstall the shower head.

4, because the shower water for a long time, because of the water quality. Due to environmental factors, there will be some scale and impurities in the shower. The accumulation of scale and impurities to a certain extent may affect the comfort of our bathing, and even have a destructive effect on the shower, so we should pay attention to proper maintenance and maintenance of the products.

5. Remove the scale. Every six months or less, take off the shower head and put it in a small basin. Rinse and soak the surface and interior of the shower head with edible white vinegar for 4-6 hours. Then gently wipe the water outlet on the surface of the shower head with a cotton rag. After reassembling the joint, let the water flow for a while. When white vinegar and scale flow out with water, the influence of scale on shower nozzle can be eliminated or reduced, and a certain sterilization effect can be achieved.

6. Maintenance of electroplating surface of faucet. Wipe the electroplated surface of the shower head with a soft cloth and a little flour frequently, and then rinse it with clear water to make the surface of the shower head as bright as new.

7. When disassembling and assembling the shower, please pay attention to the safety of yourself and the product. The gasket of the filter screen should not be too big or too thin, which may have no filtering effect, and too thin may affect the flow. The size of the filter screen should be 40-60 mesh, and strong acid should not be used for descaling, so as not to corrode the surface of the shower. Please do not disassemble the shower head for maintenance. Improper disassembly will damage the appearance and internal structure of the product.

8. The ambient temperature of the shower should not exceed 70℃. High temperature and ultraviolet rays will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the installation of shower should be as far away from electric heating sources such as Yuba as possible.