Introduction to the use of induction door lock

Nowadays, most people will use inductive door locks at home. What is an inductive door lock? Induction door lock is a kind of door lock that can be sensed by ultraviolet or infrared rays. This kind of door lock can quickly achieve the effect of opening and closing the door through these. The anti-theft function of the induction door lock is relatively strong, because this kind of door lock is similar to a fingerprint lock, and the induction door lock will remember a certain ultraviolet light or infrared light to open and close the door. Do you know how to use the induction door lock? The following small series will introduce you to the use of inductive door locks.

How to use the inductive door lock-administrator password setting

Operating steps:

1. Open the battery cover.

2. Press the setting key once to make a ticking sound.

3. Press the Start key (one digit after the number 3 on the keyboard), enter the password (3-8 digits), and then press the # key.

The operation was successful when the ticking sounded.

How to use the inductive door lock-door opening card, password, fingerprint lock and remote control settings.

Operating steps:

1. Open the battery cover

2. Press the Set key once.

3. Press the Start key, enter the password (3-8 digits) and press the # key.

4. Press the Start key, enter the number (00-99) and press the # key.

5. Press the Start key, enter the door (3-8 digits), press the # key to finish, and the password is set successfully; Point your finger at the fingerprint window to read the fingerprint. After clicking, press the same finger again to read the fingerprint.

The sound of the two readings is the same, indicating that the fingerprint input is successful; The card to be set is close to the sensing area, and the sensing card is set; Press any key on the remote control to set the remote control.

How to use the inductive door lock-delete the door opening card, password, fingerprint and remote control.

1. Open the battery cover

2. Press the setting key twice continuously.

3. Press the Start key, enter the administrator password, and then press the # key.

4. Press the Start key, enter the fingerprint, password and corresponding number of the remote controller to be deleted, and then press the # key. For example, delete a fingerprint, point your finger at the fingerprint window to read the fingerprint, put the card to be deleted near the sensing area, and press any key of the remote control.

How to use the inductive door lock-delete all cards, fingerprints, remote controls and passwords.

1. Open the battery cover

2. Press the set key three times in a row.

3. Press the Start key and enter the administrator password.

4. Finally, press # key.

How to use the induction door lock-common methods

1. Password unlocking (with anti-leakage function, you can press any number before entering the correct password to prevent password leakage). Enter the set unlocking password and press the # key, and the door lock will give a prompt tone, indicating that the unlocking is successful.

2. Unlocking the inductive card: Put the authorized door card near the inductive area, and the door lock will give a prompt tone, indicating that the unlocking is successful.

3. Fingerprint unlocking: put the authorized fingerprint on the window and send out the prompt sound of unlocking success, indicating that the unlocking is successful.

4. Remote switch lock. Press the unlock key of the remote control, and turn the handle down to unlock successfully; When the door is closed, press the remote control to close the lock, and lift the handle to successfully close the lock.

5. Indoor anti-lock braking: After the door is closed, all outdoor modes cannot be unlocked after indoor anti-lock braking.

6. Lock the door outdoors: After closing the door, press the * key to lock it, lift the handle and lock it successfully.

Advantages of inductive door lock

The door lock circuit board is treated with three defenses according to military standards, which is anti-corrosion and durable. The lock core of the door lock adopts five-pin structure, which is anti-insertion and safer.

It has a completely independent mechanical emergency unlocking mechanism, and its emergency unlocking mechanism and electronic unlocking mechanism adopt two completely independent transmission devices, which greatly improves the reliability of the door lock.

Open interface, convenient to connect with hotel management system software, and provide hardware card reading equipment, so as to realize one card.

Bian Xiao has already introduced you how to use the inductive door lock. Have you learned to use the inductive door lock now? The induction door lock is not difficult to use, but it needs to be operated according to the instructions in the manual. The use of different brands of inductive door locks will be different. You need to know how to use the inductive door lock according to different brands and types. When we choose the induction door lock, we'd better choose some with strong induction function and some with fingerprint function, because the induction door lock with this function has the best anti-theft effect.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~